engine TOYOTA VENZA 2016 Owners Manual

5
When trouble arises
6055-2. Steps to take in an emergency
VENZA_OM_OM73030U_(U) CAUTION■ To prevent an accident or injury wh en inspecting under the hood of
your vehicle
● If steam is seen coming from under the hood, do not open the hood until
the steam has subsided. The engine compartment may be very hot, caus-
ing serious injury such as burns.
● Keep hands and clothing (especially a tie, a scarf or a muffler) away from
the fans and belts. Failure to do so may cause the hands or clothing to be
caught, resulting in serious injury.
● Do not loosen the radiator cap while the engine and radiator are hot.
Serious injury, such as burns, may result from hot coolant and steam
released under pressure.
NOTICE■ When adding engine coolant
Wait until the engine has cooled down before adding engine coolant.
When adding coolant, do so slowly. Adding cool coolant to a hot engine too
quickly can cause damage to the engine.
■ To prevent damage to the cooling system
Observe the following precautions:
● Avoid contaminating the coolant with foreign matter (such as sand or dust
etc.).
● Do not use any coolant additive.

6065-2. Steps to take in an emergency
VENZA_OM_OM73030U_(U)If the vehicle becomes stuck
■ When it is difficult to free the vehicleCarry out the following procedures if the tires spin or the vehicle
becomes stuck in mud, dirt, or snow.
Stop the engine. Set the parki ng brake and shift the shift
lever in “P”.
Remove the mud, snow or sand from around the front
wheels.
Place wood, stones or some other material to help provide
traction under the front wheels.
Restart the engine.
Shift the shift lever to “D” or “R” position and release the
parking brake. Then, while exer cising caution, depress the
accelerator pedal. STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Press to turn off TRAC.

6085-2. Steps to take in an emergency
VENZA_OM_OM73030U_(U) If your vehicle has to be stopped in an emergencyOnly in an emergency, such as if it becomes impossible to stop the
vehicle in the normal way, stop the vehicle using the following pro-
cedure:
Steadily step on the brake pedal with both feet and firmly
depress it. Do not pump the brake pedal repeatedly as this will increase the
effort required to slow the vehicle.
Shift the shift lever to N.
If the shift lever is shifted to N
After slowing down, stop the vehi cle in a safe place by the
road.
Stop the engine.
If the shift lever cannot be shifted to N
Keep depressing the brake pedal with both feet to reduce
vehicle speed as much as possible.
Vehicles without a smart key
system: Stop the engine by
turning the engine switch to
the “ACC” position.STEP 1
STEP 2
STEP 3
STEP 4
STEP 3
STEP 4

5
When trouble arises
6095-2. Steps to take in an emergency
VENZA_OM_OM73030U_(U) CAUTION■ If the engine has to be turned off while driving
● Power assist for the brake and steering wheel will be lost, making the
brake pedal harder to depress and the steering wheel heavier to turn.
Decelerate as much as possible before turning off the engine.
● Vehicles without a smart key system: Never attempt to remove the key, as
doing so will lock the steering wheel. Vehicles with a smart key sys-
tem: To stop the engine, press
and hold the “ENGINE START
STOP” switch for 2 consecu-
tive seconds or more, or press
it briefly 3 times or more in
succession.
Stop the vehicle in a safe place by the road. STEP 4
Press and hold for 2 seconds or more,
or press briefly 3 times or more
STEP 5

612
VENZA_OM_OM73030U_(U) 6-1. Specifications
Maintenance data (fuel, oil level, etc.) Dimensions and weights
* 1
: Unladen vehicle
* 2
: 2WD models
* 3
: AWD models
* 4
: 2GR-FE engine
* 5
: 1AR-FE engineOverall length 189.0 in. (4800 mm)
Overall width 75.0 in. (1905 mm)
Overall height
* 1
63.4 in. (1610 mm)
Wheelbase 109.3 in. (2775 mm)
Tread Front 64.2 in. (1630 mm)
Rear 64.4 in. (1635 mm)
* 2
64.2 in. (1630 mm)
* 3
Vehicle capacity weight
(Occupants + luggage) 895 lb. (405 kg)
Trailer
Weight
Rating
(TWR) Without towing
package 1000 lb. (450 kg)
With towing
package 3500 lb. (1585 kg)
* 4
2500 lb. (1135 kg)
* 5

6146-1. Specifications
VENZA_OM_OM73030U_(U) ■ Engine number
2GR-FE engine
The engine number is stamped
on the engine block as shown.
1AR-FE engine

6156-1. Specifications
6
Vehicle specifications
VENZA_OM_OM73030U_(U) Engine
Fuel Model 2GR-FE, 1AR-FE
Ty p e
2GR-FE engine
1AR-FE engine 6-cylinder V type, 4-cycle, gasoline
4-cylinder in line, 4-cycle, gasoline
Bore and stroke
2GR-FE engine
1AR-FE engine 3.70  3.27 in. (94.0  83.0 mm)
3.54  4.13 in. (90.0  105.0 mm)
Displacement
2GR-FE engine
1AR-FE engine 210.9 cu.in. (3456 cm 3
)
163.1 cu.in. (2672 cm 3
)
Valve clearance
(engine cold) Automatic adjustment
Drive belt tension Automatic adjustment
Fuel type Unleaded gasoline only
Octane rating 87 (Research octane number 91) or higher
Fuel tank capacity
(Reference) 17.7 gal. (67 L, 14.7 Imp.gal)

6166-1. Specifications
VENZA_OM_OM73030U_(U) Lubrication system
* : The engine oil capacity is a reference quantity to be used when changing the
engine oil. Warm up and turn off the engine, wait more than 5 minutes, and
check the oil level on the dipstick.
■ Engine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use
Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy
the following grade and viscosity.
Oil grade: ILSAC GF-5 multigrade engine oil Oil capacity
(Drain and refill 
reference
* )
1AR-FE engine
2GR-FE engine Without filter: 4.2 qt. (4.0 L, 3.5 Imp.qt.)
With filter: 4.6 qt. (4.4 L, 3.9 Imp.qt.)
Without filter: 6.0 qt. (5.7 L, 5.0 Imp.qt.)
With filter: 6.4 qt. (6.1 L, 5.4 Imp.qt.)

6176-1. Specifications
6
Vehicle specifications
VENZA_OM_OM73030U_(U) Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice for
good fuel economy and good
starting in cold weather.
If SAE 0W-20 is not available,
SAE 5W-20 oil may be used.
However, it must be replaced
with SAE 0W-20 at the next oil
change.Oil viscosity (0W-20 is explained here as an example):
• The 0W in 0W-20 indicates the characteristic of the oil which allows
cold startability. Oils with a lower value before the W allow for easier
starting of the engine in cold weather.
• The 20 in 0W-20 indicates the viscosity characteristic of the oil when
the oil is at high temperature. An oil with a higher viscosity (one with a
higher value) may be better suited if the vehicle is operated at high
speeds, or under extreme load conditions.
How to read oil container label:
The International Lubricant Spec ification Advisory Committee
(ILSAC) Certification Mark is added to some oil containers to help
you select the oil you should use. Outside temperature

6186-1. Specifications
VENZA_OM_OM73030U_(U) Cooling system Capacity
2GR-FE engine With towing package: 10.9 qt. (10.3 L, 9.1 Imp.qt.)
Without towing package: 10.7 qt.
(10.1 L, 8.9 Imp.qt.)
1AR-FE engine 7.5 qt. (7.1 L, 6.2 Imp.qt.)
Coolant type Use either of the following:
• “Toyota Super Long Life Coolant”
• Similar high-quality ethylene glycol-based non-
silicate, non-amine, non-nitrite, and non-borate
coolant with long-life hybrid organic acid technol-
ogy
Do not use plain water alone.