bluetooth TOYOTA VENZA 2016 User Guide

3673-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Registering a Bluetooth ®
phone for the first timeTurn the Bluetooth ®
connection setting of your cellular phone
on.
Press the “ ” button.
Select “OK” to register a phone.
Follow the steps in “How to registering a Bluetooth ®
device”
from . (  P. 368)To use the hands-free system, it is necessary to register a
Bluetooth ®
phone with the system.
Once the phone has been registered, it is possible to use the hands-
free system.
For details about registering a Bluetooth ®
device (  P. 368)STEP 1
STEP 2
STEP 3
STEP 4
STEP 3

3683-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U)Registering a Bluetooth ®
deviceHow to register a Bluetooth ®
device
Display the “Bluetooth
* Setup” screen. (  P. 365)
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Select “Add”.
When this screen is displayed,
search for the device name dis-
played on this screen on the
screen of your Bluetooth ®
device. For details about operating the
Bluetooth ®
device, see the man-
ual that comes with it.
To cancel the registration, select
“Cancel”.
Register the Bluetooth ®
device using your Bluetooth ®
device.A PIN-code is not required for SSP (Secure Simple Pairing) compat-
ible Bluetooth ®
devices. Depending on the type of Bluetooth ®
device
being connected, a message confirming registration may be dis-
played on the Bluetooth ®
device’s screen. Respond and operate the
Bluetooth ®
device according to the confirmation message.Bluetooth ®
compatible phones (HFP) and portable audio players
(AVP) can be registered simultane ously. You can register up to 5
Bluetooth ®
devices.STEP 1
STEP 2
STEP 3
STEP 4

3693-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Check that this screen is dis-
played when registration is com-
plete.
Select “OK” when the connection status changes from “Con-
necting...” to “Connected”. If an error message is displayed, follow the guidance on the screen
to try again.
Registration can be performed from screens other than the
“Bluetooth
* Setup” screen.
■ When registering from the “Bluetooth
* Audio” screen
Display the “Bluetooth
* Audio” screen. (  P. 336)
Select “Select Device”.
Follow the steps in “How to registering a Bluetooth ®
device”
from . (  P. 368)
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Deleting a Bluetooth ®
device
Display the “Bluetooth
* Setup” screen. (  P. 365)
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Select “Remove”.
Select the desired device.
A confirmation message will be displayed, select “Yes” to
delete the device.
Check that a confirmation screen is displayed when the oper-
ation is complete. STEP 5
STEP 6
STEP 1
STEP 2
STEP 3
STEP 2
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5

3703-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U)Connecting a Bluetooth ®
devicePress the “SETUP” button.
Select “Bluetooth
* ”.
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Select the device to be con-
nected. Supported profile icons will be
displayed.
Phone
Audio player Supported profile icons for cur-
rently connected devices will illu-
minate.
Dimmed icons can be selected to
connect to the function directly.Up to 5 Bluetooth ®
devices (Phones (HFP) and audio players (AVP))
can be registered.
If more than 1 Bluetooth ®
device has been registered, select which
device to connect to. STEP 1
STEP 2
STEP 3

3713-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features Auto connection
To turn auto connection mode on, set “Bluetooth
* Power” to on.
(  P. 375)
When you register a phone, auto connection will be activated. Always
set it to this mode and leave the Bluetooth ®
phone in a place where a
connection can be established. When the engine switch is turned to the “ACC” or “ON” position (vehicles
without a smart key system) or ACCESSORY or IGNITION ON mode
(vehicles with a smart key system), the system will search for a nearby
cellular phone you have registered.
Next, the system automatically connects with the most recent of the
phones connected to in the past. Then, the connection result is displayed.
Manual connection
When auto connection has failed or “Bluetooth
* Power” is turned off,
you must connect the Bluetooth ®
device manually.
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Follow the steps in “Connecting a Bluetooth ®
device” from
. (  P. 370)
Connecting a Bluetooth ®
audio player
Registering an additional device
Select “Select Devi ce” on the Bluetooth ®
audio control
screen.
For more information:  P. 3 6 8
Selecting a registered device
Select “Select Devi ce” on the Bluetooth ®
audio control
screen.
For more information:  P. 3 7 0STEP 1
STEP 1
STEP 1
STEP 2
STEP 1
STEP 2

3723-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) ■ Reconnecting a Bluetooth ®
phone
If the system cannot connect due to poor signal strength with the engine
switch in the “ACC” or “ON” position (vehicles without a smart key system) or
ACCESSORY or IGNITION ON mode (vehicles with a smart key system),
the system will automatically attempt to reconnect.
If the phone is turned off, the system will not attempt to reconnect. In this
case, the connection must be made manually, or the phone must be rese-
lected.

3733-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Displaying a Bluetooth ®
device detailsBluetooth ®
device registration status
Display the “Bluetooth
* Setup” screen. (  P. 365)
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Select the device.
Select “Device Info”.
Following screen is displayed:
Device Name
Change connection method
(  P. 374)
Bluetooth ®
Address
Display your telephone num-
ber
The number may not be dis-
played depending on the
model of phone.
Compatibility profile of the
device
Restore default settingsYou can confirm and change th e registered device details.STEP 1
STEP 2
STEP 3
STEP 4

3753-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Detailed Bluetooth ®
system settingsHow to check and change detailed Bluetooth ®
settings
Display the “Bluetooth
* Setup” screen. (  P. 365)
Select “System Settings”.
The following screen is displayed:
Bluetooth ®
Power on/offYou can change Bluetooth ®
func-
tion
on/off
Bluetooth ®
Name
Change PIN-code (  P. 376)
Bluetooth ®
Address
Display Phone Status You can set the system to show
the status confirmation display
when connecting a telephone
Display Audio Player Status You can set the system to show
the status confirmation display
when connecting an audio player
Compatibility profile of the sys-
tem
Restore default settings
* : Bluetooth is a registered trade-
mark of Bluetooth SIG, Inc.You can confirm and change the detailed Bluetooth ®
settings.STEP 1
STEP 2
STEP 3

3763-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) Editing the Bluetooth
* PIN
You can change the PIN-c ode that is used to register your Bluetooth ®
devices in the system.
Select “Bluetooth
* PIN”.
Input a PIN-code, and select “OK”.
* : Bluetooth is a registered trademark of Bluetooth SIG, Inc. STEP 1
STEP 2

3773-2. Using the audio system (Entune Audio)
VENZA_OM_OM73030U_(U) 3
Interior features
Listening to Bluetooth ®
Audio
Status display
You can check such indicators as signal strength and battery charge
on the screen.
Battery charge The battery charge indicator may
not be displayed depending on
the connected device.
Connection statusThe Bluetooth ®
audio system enables the user to enjoy music
played on a portable player from the vehicle speakers via wireless
communication.
When a Bluetooth ®
device cannot be con nected, check the con-
nection status on the “Bluetooth* Audio” screen. If the device is not
connected, either register or reconnect the device. (  P. 370)*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Indicators Conditions
Battery charge Full Empty
Connection status Good Not connected