sensor TOYOTA VENZA 2016 Owner's Manual

2412-4. Using other driving systems
2
When driving
VENZA_OM_OM73030U_(U) ■ Sensor detection information
● Certain vehicle conditions and the surrounding environment may affect
the ability of the sensor to correctly detect obstacles. Particular instances
where this may occur are listed below.
• There is dirt, snow or ice on the sensor.
• A sensor is frozen.
• A sensor is covered in any way.
• The vehicle is leaning considerably to one side.
• On an extremely bumpy road, on an incline, on gravel, or on grass.
• The vicinity of the vehicle is noisy due to vehicle horns, motorcycle
engines, air brakes of large vehicles, or other loud noises producing
ultrasonic waves.
• There is another vehicle equipped with parking assist sensors in the
vicinity.
• The sensor is coated with a sheet of spray or heavy rain.
• The vehicle is equipped with a fender pole or wireless antenna.
• The bumper or sensor receives a strong impact.
• The vehicle is approaching a tall or curved curb.
• In harsh sunlight or intense cold weather.
• A non-genuine Toyota suspension (lowered suspension etc.) is
installed.
In addition to the examples above, there are instances in which, because of
their shapes, signs and other objects may be judged by the sensor to be
closer than they are.
● The shape of the obstacle may prevent the sensor from detecting it. Pay
particular attention to the following obstacles:
• Wires, fences, ropes, etc.
• Cotton, snow and other materials that absorb sound waves
• Sharply-angled objects
• Low obstacles
• Tall obstacles with upper sections projecting outwards in the direction
of your vehicle
■ If the display flashes and a message is displayed
 P. 578

2422-4. Using other driving systems
VENZA_OM_OM73030U_(U) ■ Certification (Canada only)
This ISM device complies with Canadian ICES-001.
CAUTION■ When using the intuitive parking assist
Observe the following precautions.
Failing to do so may result in the vehicle being unable to be driven safely
and possibly cause an accident.
● Do not use the sensor at speeds in excess of 6 mph (10 km/h).
● Do not attach any accessories within the sensor range.
NOTICE■ Notes when washing the vehicle
Do not apply intensive bursts of water or steam to the sensor area.
Doing so may result in the sensor malfunctioning.

4683-5. Other interior features
VENZA_OM_OM73030U_(U) NOTICE■ To avoid the compass malfunctions
Do not place magnets or any metal objects near the inside rear view mirror.
Doing this may cause a malfunction of the compass sensor.
■ To ensure normal operation of the compass
● Do not perform circling calibration of the compass in a place where the
earth’s magnetic field is subject to inte rference by artificial magnetic fields.
● During calibration, do not operate elec tric systems (moon roof, power win-
dows, etc.) as they may interfere with the calibration.

5314-3. Do-it-yourself maintenance
4
Maintenance and care
VENZA_OM_OM73030U_(U) 24 EFI NO.1 10 A Smart key system, multiport fuel
injection system/sequential mul-
tiport fuel inje ction system, auto-
matic transmission
25 ETCS 10 A Multiport fuel injection system/
sequential multiport fuel injection
system, electronic throttle con-
trol system
26 TURN-HAZ 15 A Turn signal lights
27 IG2 25 A INJ NO.1, INJ NO.2, SRS airbag
system
28 AMP 20 A Audio system
29 A/F
* 1
20 A Air fuel ratio sensor
EFI MAIN
* 2
20 A EFI NO.2, EFI NO.3
30 HORN 10 A Horn
31 H-LP LO (LH) 15 A Left-hand headlight (low beam)
32 H-LP LO (RH) 15 A Right-hand headlight (low beam)
33 H-LP HI (LH) 15 A Left-hand headlight (high beam)
34 H-LP HI (RH) 15 A Right-hand headlight (high beam)
35 EFI MAIN
* 1
25 A
EFI NO.2, EFI NO.3
EFI NO.4
* 2
20 A
Air fuel ratio sensor
36 DOME 7.5 A Personal/interior lights, vanity
lights, engine switch light, door
courtesy lights, power back door,
gauges and metersFuse Ampere Circuit

5334-3. Do-it-yourself maintenance
4
Maintenance and care
VENZA_OM_OM73030U_(U) ■ Driver’s side instrument panel
Fuse Ampere Circuit1 RR DOOR 20 A
Power windows
2 RL DOOR 20 A
Power windows
3 FR DOOR 20 A
Power windows
4 FR FOG 15 A
Fog lights
5 OBD 7.5 A
On-board diagnosis system
6 FL DOOR 20 A
Power windows
7 STOP 10 A Stop lights, vehicle stability con-
trol system
8 AM1 7.5 A
Starting system
9 ECU-B NO.2 7.5 A Steering sensor, air conditioning
system, power windows
10 4WD 7.5 A
Active Torque Control 4WD

5344-3. Do-it-yourself maintenance
VENZA_OM_OM73030U_(U) 11 SEAT HTR 20 A
Seat heaters
12 S/ROOF 25 A
Electric moon roof
13 TA I L 10 A Side marker lights, tail lights,
license plate light
14 PA N E L 5 A Emergency flashers, audio sys-
tem, clock, instrument panel light
control, glove box light, console
box light, steering switches, out-
side rear view mirror defoggers,
seat heaters, vehicle stability
control system, shift lever light
15 ECU-IG NO.1 10 A Multiplex communication sys-
tem, electric moon roof, power
back door, seat heaters, Active
Torque Control 4WD, audio sys-
tem, Automatic High Beam
16 RR WASHER 15 A
Rear window washer
17 A/C NO.2 10 A
Air conditioning system
18 FR WASHER 20 A
Windshield washer
19 ECU-IG NO.2 7.5 A Vehicle stability control sys-
tem, automatic headlight level-
ing system, yaw rate & G
sensor, steering sensor, shift
lock system, tire pressure
warning system, automatic
transmission, electric power
steeringFuse Ampere Circuit

5725-2. Steps to take in an emergency
VENZA_OM_OM73030U_(U) ■ If the malfunction indicator lamp comes on while driving
First check the following:
● Is the fuel empty?
If it is, fill the fuel tank immediately.
● Is the fuel tank cap loose?
If it is, tighten it securely.
The malfunction indicator lamp will go off after taking several driving trips.
If the malfunction indicator lamp does not go off even after several trips, con-
tact your Toyota dealer as soon as possible.
■ Key reminder buzzer (vehic les without smart key system)
The buzzer indicates that the key has not been removed with the engine off
and the driver’s door opened.
■ Open moon roof warning buzzer
The buzzer indicates that the moon roof is not fully closed with the engine off
and the driver’s door opened.
■ Front passenger detect ion sensor and passenger seat belt reminder
● If luggage is placed on the front passenger seat, the front passenger
detection sensor may cause the warning light to flash, even if a passen-
ger is not sitting in the seat.
● If a cushion is placed on the seat, the sensor may not detect a passen-
ger, and the warning light may not operate properly.
■ Electric power steering system warning light
When the battery charge becomes insufficient or the voltage temporarily
drops, the electric power steering system warning light may come on.

5
When trouble arises
5735-2. Steps to take in an emergency
VENZA_OM_OM73030U_(U) ■ SRS warning light
This warning light system monitors the airbag sensor assembly, front airbag
sensors, side and curtain shield airbag sensors, curtain shield airbag sen-
sors, driver’s seat position sensor, driver’s seat belt buckle switch, front pas-
senger occupant classification system (ECU and sensors), “AIR BAG ON”
indicator light, “AIR BAG OFF” indicator light, front passenger’s seat belt
buckle switch, seat belt pretensioner assemblies, airbags, interconnecting
wiring and power sources. (  P. 121)
■
The tire pressure warning light may come on due to natural causes
The tire pressure warning light may come on due to natural causes such
as natural air leaks or tire inflation pressure changes caused by temper-
ature. In this case, adjusting the ti re inflation pressu re will turn off the
warning light (after a few minutes).■
When a tire is replaced with a spare tire
The compact spare tire is not equipped with the tire pressure warning
valve and transmitter. If a tire goes flat, the tire pressure warning light will
not turn off even though the flat tire is replaced with the spare tire.
Replace the spare tire with the repair ed tire and adjust the proper tire
inflation pressure. The ti re pressure warn ing light will turn off after a few
minutes.

6496-2. Customization
6
Vehicle specifications
VENZA_OM_OM73030U_(U) Item Function Default
setting Customized
setting
Automatic light
control system
(  P. 212) Light sensor
sensitivity Level 3 Level 1 to 5 — O
Daytime running light
system (U.S.A. only) ON OFF — O
Automatic
High Beam
(if equipped) ON OFF O O
Time elapsed before
headlights
automatically turn off
after doors are
closed 30 seconds 0 seconds
OO60 seconds
90 seconds
Alarm system
(  P. 1 1 2 ) Time elapsed before
the alarm is set 14 seconds 30 seconds — O
Multi-
information
display
(TFT type only:
 P. 194) Language selection English French
OO
Spanish