TOYOTA VENZA HYBRID 2021 (in English) Service Manual
Manufacturer: TOYOTA, Model Year: 2021, Model line: VENZA HYBRID, Model: TOYOTA VENZA HYBRID 2021Pages: 68, PDF Size: 3.4 MB
Page 41 of 68
39
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Grille-mounted radarForward-facing camera
Sensors
TSS 2.0 combines a forward-facing camera mounted in front of the inside rear view
mirror and a grille-mounted radar mounted in the front grille. These sensors support
the driver assist systems.
5 I F 1 S F $ P M M J T J P O 4 Z T U F N X J U I 1 F E F T U S J B O % F U F D U J P O 1 $ 4 X 1 %
J T E F T J H O F E U P
help detect a vehicle, a bicyclist, or a pedestrian in certain situations. Using both
a camera and radar, PCS w/ PD can provide an audio/visual alert to warn you of
a possible collision under certain circumstances. If you don’t react, the system is
designed to automatically brake.
As there is a limit to the degree of recognition accuracy and control performance
that this system can provide, do not overly rely on this system. This system will not
prevent collisions or lessen collision damage or injury in every situation. Do not use
PCS instead of normal braking operations under any circumstances. Do not attempt
to test the operation of the Pre-Collision System yourself, as the system may not
operate or engage, possibly leading to an accident. In some situations, such as
when driving in inclement weather such as heavy rain, fog, snow or a sandstorm or
while driving on a curve and for a few seconds after driving on a curve, a vehicle
or pedestrian or bicyclist may not be detected by the grille-mounted radar and
forward-facing camera, preventing the system from operating or engaging properly.
See Toyota.com/safety-sense for more information.
Refer to the Toyota Owner’s Manual for a list of additional situations in which the
system operation may be limited.
Pre-Collision System with
Pedestrian Detection (PCS w/PD)
Page 42 of 68
40
TOYOTA SAFETY SENSE™
1 3 & $ 0 - - * 4 * 0 / 4 : 4 5 & . $ 0 / 5 * / 6 & %
Pre-Collision Braking
If the driver does not brake in a set time and the system determines that the
possibility of a frontal collision with a preceding vehicle is extremely high, the
system may automatically apply the brakes, reducing speed in order to help the
driver reduce the impact and in certain cases avoid the collision.
Refer to the Toyota Owner’s Manual for additional information on PCS operation,
settings adjustments, limitations, and precautions before attempting to use it.
Monocular camera sensor
Millimeter
wave radar
As part of the Pre-Collision System, this function is also designed to first provide an
alert and then automatic braking if needed.
Refer to the Toyota Owner’s Manual for additional limitations and information.Under certain conditions, the PCS system included with the TSS 2.0 package
may also help to detect a pedestrian or bicyclist in front of your vehicle using the
forward-facing camera and front grille-mounted radar. The forward-facing camera of
PCS detects a potential pedestrian or bicyclist based on size, profile, and motion
of the detected pedestrian or bicyclist. However, a pedestrian or bicyclist may not
be detected depending on the conditions, including the surrounding brightness
and the motion, posture, size, and angle of the potential detected pedestrian or
bicyclist, preventing the system from operating or engaging.
PCS PEDESTRIAN DETECTION
Pre-Collision Warning
When the system determines that the possibility of a frontal collision is high, a
buzzer will sound and a warning message will be displayed on the Multi-Information
% J T Q M B Z . * %
U P V S H F U I F E S J W F S U P U B L F F W B T J W F B D U J P O
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide additional
braking force using Brake Assist. This system may prime the brakes and may apply
greater braking force in relation to how strongly the brake pedal is depressed.
Page 43 of 68
41
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
CHANGING PRE-COLLISION ALERT TIMING
% * 4 " # - * / ( 1 3 & $ 0 - - * 4 * 0 / 4 : 4 5 & . 1 $ 4
FarMiddle
(default)Near
1 S F T T i ” or “ ” switches and select “” from the Multi-Information
% J T Q M B Z . * %
1 S F T T i
” or “ ” switches and select “ PCS” and then press “.” The
setting screen is displayed.
1 S F T T i
” or “ ” switches and select “Sensitivity” and then press “” to
select the desired setting. Each time it is pressed, the response to the PCS alert
timing changes as shown above.
1 S F T T i
” to go back to the menu.
Note: PCS is enabled each time the vehicle is turned on. The system can be
disabled/enabled and the alert timing of the system can be changed. (Alert
timing only, brake operation remains the same.)
1 S F T T i
” or “ ” switches and select “” from the Multi-Information
% J T Q M B Z . * %
1 S F T T i
” or “ ” switches and select “ PCS” and then press “.”
The setting screen is displayed.
1 S F T T i
” or “ ” switches and select “PCS on/off” and then press “”
to select the desired setting.
1 S F T T i
” to go back to the menu.
Note: The system is enabled each time the vehicle is turned on.
Refer to the Toyota Owner’s Manual for additional information on PCS operation,
settings adjustments, limitations, and precautions before attempting to use it.
Page 44 of 68
42
TOYOTA SAFETY SENSE™
By detecting visible white/yellow lane markings or the road’s edge at speeds above
N Q I
- B O F % F Q B S U V S F " M F S U X J U I 4 U F F S J O H " T T J T U - % " X 4 "
J T E F T J H O F E U P J T T V F
a visual alert and audio or steering vibration alert if an inadvertent lane departure is
detected. If the driver does not take corrective action, the Steering Assist function is
designed to provide gentle corrective steering.*
* See Toyota.com/safety-sense for more information.
Refer to the Toyota Owner’s Manual for a list of additional situations in which the
system operation may be limited.
Lane Departure Alert with Steering Assist
(LDA w/SA)
TURNING THE LDA SYSTEM ON/OFF
Press the LDA switch to turn the LDA system on. Depress again to turn it off.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to the Toyota Owner’s Manual for additional information on LDA operation,
settings adjustments, limitations, and precautions before attempting to use it.
Page 45 of 68
43
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
LANE DEPARTURE ALERT
LDA function display
(2) (1) - B O F % F Q B S U V S F " M F S U - % "
J O E J D B U P S G M B T I F T P S B O H F X I F O P Q F S B U J O H
The LDA function
E J T Q M B Z T X I F O U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
J T T X J U D I F E
to the driving assist system information screen.
5 I F T Z T U F N E J T Q M B Z T T P M J E X I J U F M J O F T P O U I F - % " J O E J D B U P S X I F O W J T J C M F M B O F
markers or the road are detected. A side flashes orange to alert the driver when
the vehicle deviates from its lane.
5 I F T Z T U F N E J T Q M B Z T P V U M J O F T P O U I F - % " J O E J D B U P S X I F O M B O F N B S L F S T P S U I F S P B E
are not detected or the function is temporarily canceled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met again,
operation of the function is automatically restored. For example, LDA may not
function on the side(s) where white/yellow lines are not detectable.
Refer to the Toyota Owner’s Manual for additional information on LDA operation,
settings adjustments, limitations, and precautions before attempting to use it.
Operation display
of steering wheel
operation supportLDA indicator
Lane markers/road edge
Page 46 of 68
44
ADJUSTING LDA ALERT SENSITIVITY
DISABLING STEERING ASSIST
SWAY WARNING SYSTEM
1 S F T T i ” or “ ” switches and select “” from the Multi-Information
% J T Q M B Z . * %
1 S F T T i
” or “ ” switches and select “ LDA” and then press “.” The
setting screen is displayed.
1 S F T T i
” or “ ” switches and select the “Steering Assist” setting function
and then press “
.”
1 S F T T i
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
5 I F E S J W F S D B O B E K V T U U I F T F O T J U J W J U Z P G U I F - % " X B S O J O H
G V O D U J P O G S P N U I F
. V M U J * O G P S N B U J P O % J T Q M B Z . * %
D V T U P N J [ B U J P O T D S F F O
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Normal - Is designed to warn approximately when the front
tire crosses the lane marker.
1 S F T T i
” or “ ” switches and select “” from the Multi-Information
% J T Q M B Z . * %
1 S F T T i
” or “ ” switches and select “ LDA” and then press “.” The
setting screen is displayed.
1 S F T T i
” or “ ” switches and select the “Sensitivity” setting function and
then press “
.”
1 S F T T i
” to go back to the menu.
SWS is a function of LDA and is designed to detect swaying based on the vehicle
location in the lane and the driver’s steering wheel operation. To help prevent
swaying, the system alerts the driver using a buzzer sound and a warning display in
the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
TOYOTA SAFETY SENSE™
Page 47 of 68
45
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
ADJUSTING SWAY ALERT SENSITIVITY
DISABLING LDA SWAY WARNING ALERT
1 S F T T i ” or “ ” switches and select “” from the Multi-Information
% J T Q M B Z . * %
1 S F T T i
” or “ ” switches and select “ LDA” and then press “.” The
setting screen is displayed.
1 S F T T i
” or “ ” switches and select the “Sway Sensitivity” setting
function and then press “
.”
1 S F T T i
” to go back to the menu.
Refer to the Toyota Owner’s Manual for additional information on LDA operation,
settings adjustments, limitations, and precautions before attempting to use it.
1 S F T T i
” or “ ” switches and select “” from the Multi-Information
% J T Q M B Z . * %
1 S F T T i
” or “ ” switches and select “ LDA” and then press “.” The
setting screen is displayed.
1 S F T T i
” or “ ” switches and select the “Sway Warning” setting function
and then press “
.”
1 S F T T i
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
8 I F O ' V M M 4 Q F F E 3 B O H F % Z O B N J D 3 B E B S $ S V J T F $ P O U S P M % 3 $ $
J T F O B C M F E B O E
M B O F N B S L F S T B S F E F U F D U B C M F
- B O F 5 S B D J O H " T T J T U - 5 "
V T F T U I F M J O F T P O U I F S P B E
and/or preceding vehicles to help keep the vehicle centered in its lane.
* Not available on all models. See Toyota.com/safety-sense for model applicability.
Refer to the Toyota Owner’s Manual for a list of additional situations in which the
system operation may be limited.
Lane Tracing Assist (LTA)
Page 48 of 68
46
TOYOTA SAFETY SENSE™
TURNING THE LTA SYSTEM ON/OFF
Press the LTA switch to turn the LTA system on. Depress again to turn it off.
Note: Operation of the LTA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to the Toyota Owner’s Manual for additional information on LTA operation,
settings adjustments, limitations, and precautions before attempting to use it.
LANE TRACING ASSIST
LTA function display
Operation display
of steering wheel
operation supportFollow-up
cruising display LTA indicator
Lane markers
(2) (1) - B O F 5 S B D J O H " T T J T U - 5 "
J O E J D B U P S G M B T I F T P S B O H F X I F O P Q F S B U J O H
Page 49 of 68
47
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
- " / & 5 3 " $ * / ( " 4 4 * 4 5 $ 0 / 5 * / 6 & %
The LTA function E J T Q M B Z T X I F O U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
J T T X J U D I F E
to the driving assist system information screen.
5 I F T Z T U F N E J T Q M B Z T T P M J E X I J U F M J O F T P O U I F - 5 " J O E J D B U P S X I F O W J T J C M F M B O F
markers on the road are detected. A side flashes orange to alert the driver when
the vehicle deviates from its lane.
5 I F T Z T U F N E J T Q M B Z T P V U M J O F T P O U I F - 5 " J O E J D B U P S X I F O M B O F N B S L F S T P O U I F
road are not detected or the function is temporarily canceled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met again,
operation of the function is automatically restored. For example, LTA may not
function on the side(s) where white/yellow lines are not detectable.
DISABLING STEERING ASSIST
1 S F T T i ” or “ ” switches and select “” from the Multi-Information
% J T Q M B Z . * %
1 S F T T i
” or “ ” switches and select “ LTA” and then press “.” The
setting screen is displayed.
1 S F T T i
” or “ ” switches and select the “Steering Assist” setting function
and then press “
.”
1 S F T T i
” to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
ADJUSTING LTA ALERT SENSITIVITY
5 I F E S J W F S D B O B E K V T U U I F T F O T J U J W J U Z P G U I F - 5 " X B S O J O H
G V O D U J P O G S P N U I F
. V M U J * O G P S N B U J P O % J T Q M B Z . * %
D V T U P N J [ B U J P O T D S F F O
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Normal - Is designed to warn approximately when the front
tire crosses the lane marker.
1 S F T T i
” or “ ” switches and select “” from the Multi-Information
% J T Q M B Z . * %
1 S F T T i
” or “ ” switches and select “ LTA” and then press “.” The
setting screen is displayed.
1 S F T T i
” or “ ” switches and select the “Sensitivity” setting function and
then press “
.”
1 S F T T i
” to go back to the menu.
Page 50 of 68
48
TOYOTA SAFETY SENSE™
LANE CENTERING
The lane centering function is linked with Full-Speed Range Dynamic Radar Cruise
$ P O U S P M % 3 $ $
B O E Q S P W J E F T U I F S F R V J S F E B T T J T U B O D F C Z P Q F S B U J O H U I F T U F F S J O H
wheel to keep the vehicle in its current lane.
When dynamic radar cruise control with full-speed range is not operating, the lane
centering function does not operate.
1 S F T T i
” or “ ” switches and select “” from the Multi-Information
% J T Q M B Z . * %
1 S F T T i
” or “ ” switches and select “ LTA” and then press “.” The
setting screen is displayed.
1 S F T T i
” or “ ” switches and select the “Lane Center” setting function
and then press “
.”
1 S F T T i
” to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to the Toyota Owner’s Manual for additional information on LTA operation,
settings adjustments, limitations, and precautions before attempting to use it.
DISABLING LANE CENTERING FUNCTION