turn signal TOYOTA xB 2010 Accessories, Audio & Navigation (in English)

9
ALPINE MFTY802A 68-14470Z28-C (EN)
Bass/Treble setting mode
1 Initialize the Bass/Treble setting
value.
Touch [Flat] of Bass/Treble to initial-
ize the bass level/treble level setting.
2 Bass/Treble level 1 step down
Touch [-] of Bass/Treble to lower the
bass level/treble level by 1 step.
3 Bass/Treble level 1 step up
Touch [+] of Bass/Treble to raise the
bass level/treble level by 1 step.
4 Switching the Audio setting
mode
Touch [] or [] to change the Audio
setting mode.
Contrast :The display ranges from -2
to +8.
Car Type :According to the car type,
you can select from 5 modes
(Flat/xB/tC/xD/iQ).
Connection :You can select from the
modes below.
Subwoofer :Turns on or off the Subwoofer
output signal (ON/OFF).
Rear View Camera : When ON is set and switch-
ed to Rear view camera
signal, the rear view is dis-
played on this unit. (ON/OFF)
Note : Only if Rear view
camera accessory
is added by customer.
Soft button operation
In the Audio setting mode or MENU
setting mode, etc., you can use the
same function by touching the Soft
button of the Touch panel. 5
Canceling the Audio setting
mode
Touch [] to cancel the Audio set-
ting mode.
Audio setting (soft
button operation)

14
ALPINE MFTY802A 68-14470Z28-C (EN)
Sub-menu Subwoofer/Rear view
camera setting mode
1 Subwoofer signal output con-
trol
Touch to switch between ON and OFF.
2 Rear view camera signal
input control
Touch to switch between ON and OFF.
3 Canceling the MENU setting/
Returning to the MENU setting
main screen
Touch [] to return to MENU setting
main screen; If you touch and hold
[
] for at least 2 seconds, the MENU
setting mode is canceled.
Sub-menu Car Type selecting mode
1
Touch [] or [] to select desired
car type.
2 Canceling the MENU setting/
Returning to the MENU setting
main screen
Touch [] to return to MENU setting
main screen; If you touch and hold
[
] for at least 2 seconds, the MENU
setting mode is canceled.

18
ALPINE MFTY802A 68-14470Z28-C (EN)
Soft button operation
1 TUNE SEEK UP
Touch [f ] to automatically select
the desired station. The radio stations
are automatically tuned in order of fre-
quency, starting with the next highest
frequency station and stops when the
station is received.
2 TUNE SEEK DOWN
Touch [g ] to automatically select
the desired station. The radio stations
are automatically tuned in order of fre-
quency starting with the next lowest
frequency station and stops when the
station is received.
NOTICE
• The ST indicator lights up in the dis-
play when a stereo FM station is
tuned in.
• The
indicator blinks in the dis-
play when an HD Radio™ signal
is tuned in.
• The
indicator lights up in the
display when an HD Radio™ sta-
tion is played.
• The [CHANNEL LIST] soft button
appears when multicast station is
received.
• When a radio station is selected in
the HD Radio™, first, an analog
signal is received, then the signal
switches to the digital signal.
• If you touch [HD OFF] while receiv-
ing digital signal, the unit will switch
to analog signal. The
indica-
tor blinks for 30 seconds, then turns
off.
• When [HD OFF] lights up, [CHAN-
NEL LIST] will not be displayed.
3 Switching the received signal
category
When [HD OFF] lights up, only ana-
log signal can be received.
T ouch the lit [HD OFF] to turn off the
light. Both digital signal and analog
signal can be received.

20
ALPINE MFTY802A 68-14470Z28-C (EN)
Multicast Channel List mode
HD Radio™ mode
1 Scrolling page (appears when
Tag information, etc., exceeds
the screen display.)
Touch [] to scroll to the next page in
order to display Tag information, etc.,
(displays for 10 seconds and returns).
2 Recalling the Multicast Channel
List mode (appears when a
multicast station is received)
Touch [CHANNEL LIST] to activate
Multicast Channel List mode.
T ouch the desired channel to receive
the program.
3 Multicast Channel UP/DOWN
(Appears when multicast sta-
tion is received)
Touch CHANNEL [9 ] or [8] to select
desired channel.
HD indicator
Multicast channels Return
Page down
Page up
NOTICE
When an HD Radio broadcast is
first received, an analog signal is
played for a few seconds before
switching over to digital.

49
ALPINE MFTY802A 68-14470Z28-C (EN)
Error indications
Indication for CD Player
Error 1
• Disc cannot be read.
-T ry another disc.
Error 3
• Mechanism error.
1) Press the c button and eject the
CD. If the CD does not eject, press
and hold c button again until it
ejects the disc. If the CD still does not eject, con-
sult your dealer.
2) When the error indication re-
mains after ejecting, press the c
button again. If the error indication still does
not turn off after pressing the c
button a few times, consult your
dealer.
•A copy-protected WMA file was
played back.
-Y ou can only play back non-copy-
protected files.
Error 4
• Abnormal current is run to the USB
connector device.
-Y ou can solve the problem by
switching the source, turning the
unit power OFF, or ACC to the OFF
position.
Indication for iPod
No Songs
• There are no songs in the iPod.
-Download songs to the iPod and
connect to the unit.
Comm. Error
• Communication error.
-T urn the ignition key OFF, and then
set to ACC or ON again.
- Check the display by reconnect-
ing between the iPod and the unit,
using the iPod cable.
Indication for SAT Radio
Check Antenna
• The XM antenna is not connected
to the XM radio module.
-Check whether the XM antenna
cable is attached securely to the
XM radio module.
Updating
• Radio is being updated with latest
encryption code.
-W ait until encryption code is be-
ing updated. Channels 0 and 1
should function normally.
No Signal
• XM signal is too weak at the cur-
rent location.
-W ait until the vehicle reaches a lo-
cation with a stronger signal.
Loading
• Radio is acquiring audio or program
information.
-W ait until the radio has received
the information.