reset TOYOTA xB 2012 Accessories, Audio & Navigation (in English)

10
10

Bluetooth
audio
The next
track is
played
back.
The first
song in the
next album is
played back.
AMPlay is
switched
over to
the next
preset
channel.
If you remove
your hand from
the button
for less than
1.5 seconds,
the system
searches for
stations where
reception is
possible in
ascending
order. When
such a station
is detected, it
is tuned in.
HD Radio
broadcast
If you press
this button
down on for
1.5 seconds or
longer, even
with frequency
loops, the
SEEK function
continues to
operate (Non-
stop SEEK
function).
If you release
the button
during
operations of
the non-stop
SEEK function,
this changes
to the SEEK
function.
FM
HD Radio
broadcast
Switches
over to
the next
preset
channel.
If you remove
your hand from
the button
for less than
1.5 seconds,
the system
searches for
stations where
reception is
possible in
ascending
order. When
such a station
is detected,
it is tuned
in. The PT Y
select function
becomes
active when
the PT Y genre
is established.

11
11

If you press
this button
down for 1.5
seconds or
longer, even
with frequency
loops, the
SEEK function
continues to
operate (Non-
stop SEEK
function).
If you release
the button
during
operations
of the non-
stop SEEK
function, this
will change
to the SEEK
function. The
PT Y selection
function is
cancelled
when the non-
stop SEEK
function is in
effect.
XM
Satellite
Radio
broadcast
Switches
over to
the next
preset
channel.
If you remove
your hand from
the button
for less than
1.5 seconds,
T YPE SEEK is
initiated.
When
the SEEK
function is
in effect,
channels
that are
being
tuned
in can
continue
to be
listened
to.
If you press
down on this
button for 1.5
seconds or
longer, the
SEEK function
continues
to be active
during the time
the button is
pressed down.
When you
release your
hand from the
button, you
will continue
to receive the
channel that
was tuned in.
AUXNothing
happens.
Nothing
happens.
A / VNothing
happens.
Nothing
happens.
3 [∨]
SourceActions when pressed down
Actions when the button is kept pressed down for 0.8 seconds of longer
CDPlayback
is returned
to the
beginning
of the
track. If
you press
again, the
previous
track is
played
back.
Nothing
happens.
MP3Playback
is returned
to the
beginning
of the
file. If
you press
again, the
previous
file is
played
back.
The first song
in the previous
folder is played
back.
WMA

1
1 

USBPlayback
is returned
to the
beginning
of the
file. If
you press
again, the
previous
file is
played
back.
The first song
in the previous
folder is played
back.
iPodPlayback
is returned
to the
beginning
of the
file. If
you press
again, the
previous
file is
played
back.
Nothing
happens.
PandoraThe
previous
station is
tuned in.
Nothing
happens.
Bluetooth
audio
Playback
is returned
to the
beginning
of the
track. If
you press
again, the
previous
track is
played
back.
The first song
of the previous
album is
played back.
AMPlayback
is
switched
over to the
previous
preset
channel.
If you remove
your hand from
the button for
less than 1.5
seconds and
a station is
detected, it is
tuned in.
HD Radio
broadcast
If you press
down on this
button for 1.5
seconds or
longer, even
with frequency
loops, the
SEEK function
continues to
operate (Non-
stop SEEK
function). If
you release
the button
during
operations of
the non-stop
SEEK function,
this will
change to the
SEEK function.

13
13

FM
HD Radio
broadcast
Switches
over to the
previous
preset
channel.
If you remove
your hand from
the button
for less than
1.5 seconds,
the station
detected is
tuned in. The
PT Y select
function is
activated
when the
PT Y genre is
established.
If you press
down on this
button for 1.5
seconds or
longer, even
with frequency
loops, the
SEEK function
continues to
operate (Non-
stop SEEK
function). If
you release
the button
during
operations of
the non-stop
SEEK function,
you will be
switched over
to the SEEK
function. The
PT Y selection
function is
cancelled
when the non-
stop SEEK
function is in
effect.
XM
Satellite
Radio
broadcast
Playback is switched over to the next preset channel.
If you remove your hand from the button for less then 1.5 seconds, T YPE SEEK is initiated.
When the SEEK function is in effect, you can continue to listen to channels that are being tuned in.
If you press down on this button for 1.5 seconds or longer, the SEEK function continues to operate during the time the button is pressed down. When you release your hand from the button, you will continue to receive the channel that was tuned in.
AUXNothing happens.Nothing happens.
A / VNothing happens.Nothing happens.
4 [VOL]Press on [+] to increase the volume and press [–] to decrease the vol-ume.

17
17

Changing the Frequency
Manually
Touch [] and then, after chang-ing the MULTI SELECTOR to TUNE mode, turn the MULTI SELECTOR to the right to increase the frequency and to the left to decrease the fre-quency.• If the volume fluctuates, touch [] to change to the TUNE mode, where you can change the frequency.
Searching for Frequencies That
Can Be Tuned In
Touch either [] or [] to search in either ascending or descending order for stations that can be tuned in. When a station is detected, that station will be tuned in. If you press down on either of these for 1.5 seconds or longer, even with frequency loops, the SEEK function continues to operate (Non-stop SEEK function). If you release either during operations of the Non-Stop SEEK function, the SEEK function will take over.For FM, the PT Y select function is activated when the PT Y genre is established. However, when the Non-Stop SEEK function is active, the PT Y selection function is can-
celled.
•
•
Listening to Preset Channels
Touch [Presets] to display the Preset screen. Touch on any channel from 1 to 6 on the Preset screen. Frequencies recorded on the preset channel will be tuned in. Touch [>>] to switch the display to the next preset page, and [<<] to switch the display to the previous preset page.
The pages change in the order of AM d FM1 d FM2 d SAT1 d SAT2 d SAT3 (d Return to AM). (SAT is only displayed when the SAT unit is con-nected.)
Recording the current frequency
on the preset channel
Touch any channel from 1 to 6 on the Preset screen, continuing to touch the channel for 1.7 seconds or longer.
NOTICE
You can store up to 6 stations
per band.
Temporarily Muting the Sound
Touch [] to temporarily mute the sound. Touch [] to resume audio output.
•
•
•
Searching for Frequencies That
Can be Tuned In (Only for FM/
HD Radio / XM Satellite Radio)
Touch [SCAN] to search for frequen-cies that can be tuned in. Audio output will be produced in 5 -second snippets for stations that have been located. If you touch on [SCAN] again during the time of the audio output from the station you want to listen to, that station will be tuned in. When setting the PT Y genre, audio from stations applicable to the PT Y genre that has been set up is output continuously in 5 -second snippets. If you again touch [SCAN], the broad-cast being output will continue to be tuned in and you will be able to select a PT Y genre. If you loop the search for stations without touching [SCAN], a beeping sound will be emitted and the last radio station to be picked up will be tuned in and then you will be able to select a PT Y genre (Only for XM Satellite Radio). Audio broadcasts cor-responding to the current categories are continuously output in 5 -second snippets. If you touch [SCAN] again, you will continue to receive the broad-cast being output. If you loop the detection of stations without touching [SCAN], you will hear a beeping sound and the last station to be received will be tuned in.
•

31
31

Connecting the iPod
Connect the USB connector.
Connect the iPod as indicated in
the figure below using an optional
cable.
Push the Dock connector into the
Dock connector port until you
hear a click to connect firmly. If it
does not go in smoothly, it may be
upside down so do not force it in
as this may result in damage.
To the vehicle's USB connector *2
*1
USB port
iPod with Dock connector port
Dock connector
When connecting the iPod, remove
a headphone cable from the iPod.
When connecting the iPod, it is
recommended to use a separately
purchased car kit.
*1 It is recommended to use a USB cable which satisfies USB 2.0 standards. (Measurements should satisfy USB 2.0 standards)
*2 Connection location differs depend
-ing on the vehicle.
Vehicle
type
Connection location
tCConnect to the USB
connector near the shift
knob.
xBConnect to the USB
connector near the
parking brake.
xDConnect to the USB
connector near the cup
holder.
iQConnect to the USB
connector near the shift
knob.
As soon as the iPod is connected, its
power is automatically turned on.
While the iPod is connected to this
unit, Indicates that an accessory
has been connected to the iPod.
When the ignition switch is set
to ACC or ON, the iPod’s battery
is charged while the iPod is
connected to this unit.
You cannot use the iPod’s remote
control at the same time.
•
•
You may hear noise if you
disconnect during iPod playback.
NOTICE
To resolve most problems
when using your iPod with
the Scion Audio system,
disconnect your iPod from the
vehicle iPod connection and
reset it.
For instructions on how to
reset your iPod, refer to the
User Guide of your iPod.
Connect the Dock connector
directly to the iPod with
Dock connector port. Do not
connect it via the iPod Dock or
other connection.
When the iPod is connected
to this unit, sound will also be
heard from the headphone of
the iPod.
Disconnect the headphone
from the iPod before use.
If you install an audio system
other than a Scion Genuine
Audio, you will not be able to
use the USB connector.
If the iPod does not operate
with Scion Audio system,
disconnect the connector from
the iPod and reconnect again.
•
•
•
•
•
•
•
•