inflation pressure TOYOTA xB 2013 Owners Manual (in English)
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2013, Model line: xB, Model: TOYOTA xB 2013Pages: 396, PDF Size: 10.16 MB
Page 4 of 396

TABLE OF CONTENTSIndex
4
Scion_xB_OM_OM12G46U_(U)
4-1. Maintenance and careCleaning and protecting the vehicle exterior ........... 206
Cleaning and protecting the vehicle interior ............ 209
4-2. Maintenance Maintenance requirements .................... 212
General maintenance ......... 214
Emission inspection and maintenance (I/M)
programs .......................... 218
4-3. Do-it-yourself maintenance Do-it-yourself service precautions ...................... 219
Hood................................... 222
Positioning a floor jack ....... 224
Engine compartment .......... 226
Tires ................................... 240
Tire inflation pressure......... 248
Wheels ............................... 252
Air conditioning filter ........... 255
Wireless remote control battery .............................. 258
Checking and replacing fuses ................................ 262
Light bulbs .......................... 272 5-1. Essential information
Emergency flashers ............ 284
If your vehicle needs to be towed ........................... 285
If you think something is wrong ............................ 292
Fuel pump shut off system .............................. 293
5-2. Steps to take in an emergency If a warning light turns on or a warning buzzer
sounds... .......................... 294
If you have a flat tire ........... 307
If the engine will not start .................................. 321
If the shift lever cannot be shifted from P (automatic
transmission) .................... 322
If you lose your keys ........... 323
If the vehicle battery is discharged ........................ 324
If your vehicle overheats..... 328
If the vehicle becomes stuck ................................. 331
If your vehicle has to be stopped in an
emergency ........................ 333
4Maintenance and care5When trouble arises
Page 7 of 396

7
Scion_xB_OM_OM12G46U_(U)
Rear window defogger P. 180
Rear window wiper
P. 146
License plate lights P. 140
Back door P. 37
Rear turn signal lights P. 128
Stop/tail and rear side marker lights
P. 140
Fuel filler door P. 61
Side doors P. 31
Tires
●Rotation
● Replacement
● Inflation pressure
● Information
P. 240
P. 307
P. 248
P. 349
: If equipped
Page 156 of 396

156 2-4. Using other driving systems
Scion_xB_OM_OM12G46U_(U)
CAUTION
■Replacing tires
Make sure that all tires are of the specified size, brand, tread pattern and
total load capacity. In addition, make sure that the tires are inflated to the
recommended tire inflation pressure level.
The ABS and VSC systems will not function correctly if different tires are
installed on the vehicle.
Contact your Scion dealer for further information when replacing tires or
wheels.
■ Handling of tires and the suspension
Using tires with any kind of problem or modifying the suspension will affect
the driving assist systems, and may cause a system to malfunction.
Page 205 of 396

Maintenance and care4
205
Scion_xB_OM_OM12G46U_(U)
4-1. Maintenance and careCleaning and protecting the vehicle exterior......... 206
Cleaning and protecting the vehicle interior.......... 209 4-2. Maintenance
Maintenance requirements .................. 212
General maintenance....... 214
Emission inspection and maintenance (I/M)
programs ........................ 218
4-3. Do-it-yourself maintenance Do-it-yourself service precautions .................... 219
Hood ................................ 222
Positioning a floor jack ..... 224
Engine compartment ........ 226
Tires ................................. 240
Tire inflation pressure ...... 248
Wheels ............................. 252
Air conditioning filter......... 255
Wireless remote control battery ............................ 258
Checking and replacing fuses .............................. 262
Light bulbs........................ 272
Page 217 of 396

217
4-2. Maintenance
4
Maintenance and care
Scion_xB_OM_OM12G46U_(U)
Vehicle exterior
ItemsCheck points
Doors • Do the doors operate smoothly?
Engine hood • Does the engine hood lock sys-
tem work properly?
Fluid leaks • There should not be any signs of
fluid leakage after the vehicle has
been parked.
Tires • Is the tire inflation pressure cor-
rect?
• The tires should not be dam- aged or excessively worn.
• Have the tires been rotated according to the maintenance
schedule?
• The wheel nuts should not be loose.
CAUTION
■ If the engine is running
Turn the engine off and ensure that there is adequate ventilation before per-
forming maintenance checks.
Page 220 of 396

220 4-3. Do-it-yourself maintenance
Scion_xB_OM_OM12G46U_(U)
ItemsParts and tools
Engine oil levelP. 227)
• “Toyota Genuine Motor Oil” or
equivalent
• Rag or paper towel
• Funnel (used only for adding engine oil)
Fuses (P. 262)• Fuse with same amperage rating
as original
Light bulbs (P. 272)
• Bulb with same number and watt-
age rating as original
• Flathead screwdriver
Radiator and condenser (P. 233)
Tire inflation pressure ( P. 248)• Tire pressure gauge
• Compressed air source
Washer fluid (P. 238)
• Water or washer fluid containing
antifreeze (for winter use)
• Funnel (used only for adding water or washer fluid)
Page 240 of 396

240
4-3. Do-it-yourself maintenance
Scion_xB_OM_OM12G46U_(U)
Tires
Replace or rotate tires in accordance with maintenance sched-
ules and treadwear.
■Checking tires
New tread
Treadwear indicator
Worn tread
The location of treadwear
indicators is shown by the
“TWI” or “ ” marks, etc.,
molded on the sidewall of
each tire.
Check spare tire condition
and pressure if not rotated.
■Tire rotation
Rotate the tires in the order
shown.
To equalize tire wear and
extend tire life, Scion recom-
mends that tire rotation is
carried out at the same inter-
val as tire inspection.
■Tire pressure warning system
Your Scion is equipped with a tire pressure warning system that
uses tire pressure warning valves and transmitters to detect low
tire inflation pressure before serious problems arise. (P. 300)
Front
Page 241 of 396

241
4-3. Do-it-yourself maintenance
4
Maintenance and care
Scion_xB_OM_OM12G46U_(U)
Installing tire pressure warning valves and transmitters
When replacing tires or wheels, tire pressure warning valves and
transmitters must also be installed.
When new tire pressure warning valves and transmitters are
installed, new ID codes must be registered in the tire pressure warn-
ing computer and the tire pressure warning system must be initial-
ized. Have tire pressure warning valve and transmitter ID codes
registered by your Scion dealer. ( P. 242)
■ How to initialize the tire pressure warning system
Park the vehicle in a safe place and turn the engine switch off.
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire infla-
tion pressure level. ( P. 344)
Make sure to adjust the tire pressure to the specified cold tire
inflation pressure level. The ti re pressure warning system will
operate based on this pressure level.
Turn the engine switch to the “ON” position.
STEP 1
STEP 2
STEP 3
Page 243 of 396

243
4-3. Do-it-yourself maintenance
4
Maintenance and care
Scion_xB_OM_OM12G46U_(U)
■When to replace your vehicle’s tires
Tires should be replaced if:
●You have tire damage such as cuts, splits, cracks deep enough to
expose the fabric, and bulges indicating internal damage
●A tire goes flat repeatedly or c
annot be properly repaired due to the
size or location of a cut or other damage
If you are not sure, consult with your Scion dealer.
■Replacing tires and wheels
If the ID code of the tire pressure warning valve and transmitter is not
registered, the tire pre ssure warning system will not work properly. After
driving for about 20 minutes, the tire pressure warning light blinks for
1 minute and stay on to indicate a system malfunction.
■Tire life
Any tire over 6 years old must be checked by a qualified technician even
if it has seldom or never been used or damage is not obvious.
■Routine tire inflation pressure checks
The tire pressure warning system doe s not replace routine tire inflation
pressure checks. Make su re to check tire inflation pressure as part of
your routine of daily vehicle checks.
■Maximum load of tire
Check that the number given by divi ding the maximum load by 1.10 of
the replacement tire is greater than 1/2 of the Gross Axle Weight Ratings
(GAWR) of either the front axle or the rear axle, whichever is greater.
For the GAWR, see the Certification
Label. For the maximum load of the
tire, see the load limit at maximum cold
tire inflation pressure mentioned on the
sidewall of the tire. (P. 349)
Page 245 of 396

245
4-3. Do-it-yourself maintenance
4
Maintenance and care
Scion_xB_OM_OM12G46U_(U)
■If you push the tire pressure warning reset button accidentally
If initialization is performed, adjust t
he tire inflation pressure to the speci-
fied level and initialize the tire pressure warning system again.
■When the initialization of the tire pressure warning system has
failed
Initialization can be completed in a few minutes. However, in the follow-
ing cases, the settings have not b een recorded and the system will not
operate properly. If repeated attempts to record tire inflation pressure
settings are unsuccessful, have the vehicle inspected by your Scion
dealer.
●When operating the tire pressure warning reset button, the tire pres-
sure warning light doe s not blink 3 times.
●After driving for a certain period of time since the initialization has
been completed, the wa rning light comes on after blinking for 1
minute.
■Tire pressure warning system certification
FCC ID: PAXPMV107J
FCC ID: HYQ13BCX
For vehicles sold in the U.S.A.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC WARNING:
Changes or modifications not expre ssly approved by the party responsi-
ble for compliance could void the user’s authority to operate the equip-
ment.
For vehicles sold in Canada
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this de vice must accept any interference,
including interference that may caus e undesired operation of the device.