Set clock TOYOTA YARIS 2019 Owners Manual (in English)

YARIS SEDAN_OM_OM99S50z_(U)
2534-1. Climate Control System
4
Interior Features
Set the mode selector dial to the position.
Set the temperature control dial to the cold position.
Set the fan control dial to the desired speed.
Turn on the air conditioner by pressing the A/C switch.
After cooling begins, adjust the fan control dial and temperature
control dial as needed to maintain maximum comfort.
● When maximum cooling is desired, set the temperature control di al to the
extreme cold position and set the air intake selector to the re circulated air
position, then turn the fan control dial fully clockwise.
● If warmer air is desired at floor level, set the mode selector dial to the
position and adjust the temperature control dial to maintain ma ximum com-
fort.
● The air to the floor is warmer than air to the face (except when the tempera-
ture control dial is set at the extreme hot or cold position).
Cooling
NOTICE
If the air conditioner is used while driving up long hills or in heavy traffic,
monitor the engine coolant temperature warning light to see if it is illumi-
nated or flashing ( P. 154).
The air conditioner may cause engine overheating. If the warnin g light is
illuminated or flashing, turn the air-conditioning off ( P. 517).
1
2
3
4
5

254
YARIS SEDAN_OM_OM99S50z_(U)
4-1. Climate Control System
Set the mode selector dial to the position.
Set the air intake s elector to the outside air position.
Set the temperature control dial to the desired position.
Set the fan control dial to the desired speed.
Set the mode selector dial to the position.
Set the temperature control dial to the desired position.
Set the fan control dial to the desired speed.
If dehumidified heating is desire d, turn on the air conditioner.
●For maximum defrosting, turn on the air conditioner, set the te mperature
control dial to the extreme hot position, and turn the fan cont rol dial fully
clockwise.
● If warm air is desired at the floor, set the mode selector dial to the
position.
● In the or position, the air conditioner is automatically turn ed on
and the outside air position is automatically selected to defro st the wind-
shield. In the or position, the outside air position cannot be
changed to the recirculated air position.
Ventilation
Windshield Defrosting and Defogging
WARNING
■ Do not defog the windshield using the position with the temper a-
ture control set to the cold position
Using the position with the temperature control set to the col d posi-
tion is dangerous as it will cause the outside of the windshiel d to fog up.
Your vision will be hampered, which could lead to a serious acc ident. Set
the temperature control to the hot or warm position when using the
position.
1
2
3
4
1
2
3
4

YARIS SEDAN_OM_OM99S50z_(U)
2574-1. Climate Control System
4
Interior Features
■Temperature control dial
This dial controls temperature. Turn it clockwise for hot and coun-
terclockwise for cold.
■Fan control dial
The fan has seven speeds.
● AUTO position
The amount of airflow will be aut omatically controlled in accor-
dance with the set temperature.
● Except AUTO position
The airflow amount can be adjusted to the desired level by turn -
ing the dial.
● 0 position
To turn off the system, s et the dial to 0 position.
■Mode selector dial
Turn the mode selector dial to select airflow mode (P. 248).
● AUTO position
The airflow mode automatically a djusts to the selected tempera-
ture.
● Except AUTO position
The desired airflow position can be selected by turning the dial.
■A/C switch
The air conditioner (cooling/de humidifying functions) can be tu rned
on or off by pressing the switch while the fan control dial is at a
position other than 0.
The indicator light tur ns on while the air conditioner is opera ting.
Control Switches

275
YARIS SEDAN_OM_OM99S50z_(U)
4-2. Audio System
4
Interior Features
Audio Set (Type A [non-touchscreen])
●Power/Volume/Sound Controls ( P. 276)
● Clock ( P. 279)
● Operating the Radio ( P. 2 8 0 )
● Operating the Compact Disc (CD) Player ( P. 283)
● How to use Auxiliary jack/USB port ( P. 290)
● Error Indications ( P. 2 9 0 )
: If equipped

YARIS SEDAN_OM_OM99S50z_(U)
2774-2. Audio System
4
Interior Features
■Audio sound adjustmentPress the menu button ( ) to select the function. The
selected function will be indicated.
Turn the audio control dial to adjust the selected functions as fol-
lows:
*: Depending on the model, this function may not be available.
1
2
IndicationSetting value
Turn CounterclockwiseTurn Clockwise
ALC
(Automatic volume
adjustment)
Level decreaseLevel increase
BASS
(Low pitch sound)Decrease bassIncrease bass
TREB
(Treble sound)Decrease trebleIncrease treble
FA D E
(Front/back volume bal- ance)Shift the sound to the frontShift the sound to the rear
BAL
(Left/right volume bal- ance)Shift the sound to the
leftShift the sound to the right
BEEP
(Audio operation sound)OffOn
BT SETUP*Select mode
12Hr< >24Hr
(12 Hr/24 Hr time
adjustment)12Hr
(Flashing)24Hr
(Flashing)

278
YARIS SEDAN_OM_OM99S50z_(U)
4-2. Audio System
●ALC (Automatic v olume adjustment)
The automatic level control (ALC) changes the audio volume auto -
matically according to the vehicle speed. The faster the vehicl e
speed, the higher the volume increases. ALC has ALC OFF and
ALC LEVEL 1 to 7 modes. At ALC LEVEL 7, the amount that the
volume can increase is at the maximum. Select the mode accordin g
to the driving conditions.
● BEEP (Audio operation sound)
The setting for the operation sound when pressing and holding a
button can be changed. The initial setting is ON. Set to OFF to
mute the operation sound.
● BT SETUP mode (if equipped)
Music and other audio such as voice data recorded on portable
audio devices and mobile phones available on the market which
are equipped with the Bluetooth
® transmission function can be lis-
tened to via wireless transmission over the vehicle’s speakers.
Using the BT SETUP mode, these devices can be programmed to
the Bluetooth
® unit or changed ( P. 3 4 1 ) .
● 12Hr< >24Hr (12 Hr/ 24 Hr time adjustment)
Rotating the audio control dial switches the display between 12 and
24-hour clock time ( P. 279).
If not operated for several seconds, the display returns to the previous dis-
play. To reset bass, treble, fade, and balance, press the menu button ( )
for 2 seconds. The unit will beep and “CLEAR” will be displayed .

YARIS SEDAN_OM_OM99S50z_(U)
2794-2. Audio System
4
Interior Features
■Setting the time
The clock can be set at any time when the ignition is switched to
ACC or ON.
To adjust the time, press the clock button ( ) for about 2
seconds until a beep is heard.
The clock’s current time will flash.
Time adjustment• To adjust the time, press the hour/minute set button ( , ) while the clock’s curr ent time is flashing.
• The hours advance while the hour set button ( ) is pressed. The minutes advance while the minute set button
( ) is pressed.
Press the clock button ( ) again to start the clock.
Clock
:00 button
Audio display
Menu button Audio control dial
Clock button
Hour/Minute set switch1
2
3
4
5
6
1
2
3

280
YARIS SEDAN_OM_OM99S50z_(U)
4-2. Audio System
■Time resettingPress the clock button ( ) for about 2 seconds until a beep
is heard.
Press the :00 button (1).
When the button is pressed, the time will be reset as follows:
(Example) 12:01 - 12:29 12:00
12:30 - 12:59 1:00
●When the :00 button (1) is pressed, the seconds will start at “ 00”.
● Switching between 12 and 24-hour clock time:
Press the menu button ( ) several times until 12 and 24-hour clock time
are displayed. Turn the audio control dial in either direction, select the
desired clock setting while the preferred clock time is flashin g.
■
Radio ON
Press a band selector butt on ( ) to turn the radio on.
■Band selection
Successively pressing the band selector button ( ) switches
the bands as follows: FM1FM2 AM.
The selected mode will be indicated.
Operating the Radio
1
2
3
Audio display
Channel preset buttons
Auto memory button Scan button
Band selector button
Tuning button1
2
3
4
5
6

291
YARIS SEDAN_OM_OM99S50z_(U)
4-2. Audio System
4
Interior Features
Audio Set (Type B [touchscreen])
The explanation of functions described in this manual may differ from
the actual operation, and the shapes of screens and buttons and the
letters and characters displayed may also differ from the actua l
appearance.
Additionally, depending on future software updates, the content may
successively change without notice.
■Commander switch operation
For safety reasons, some operations are disabled while the vehi cle
is being driven.
● Volume dial operation
Press the volume dial to
switch the audio MUTE on
and off.
Turn the volume dial to adjust
the volume. The volume
increases by turning the dial
clockwise, and decreases by
turning it counterclockwise.
: If equipped
Audio Set (Type B) has 3 d ifferent human interfaces.
• Commander switch
• Touch panel
• Voice recognition with steer ing switch and microphone
Vo l u m e d i al

296
YARIS SEDAN_OM_OM99S50z_(U)
4-2. Audio System
■Volume adjustment
Turn the commander switch volume dial. The volume switch on the
steering switch can also be pressed.
Press the volume dial to switch the audio MUTE on and off.
■
Display setting
Select the icon on the home screen and display the Settings
screen.
Select the tab to select the i tem you would like to change.
● Display OFF/Clock
The center display can be turned off. Select to turn
the display off. When is selected the cen-
ter display turns off and the clock is displayed.
The center display can be turned back on as follows:
• Touch the center display.
• Operate the commander switch.
● Daytime/nighttime (Sy stem) screen setting
The daytime or nighttime screen can be selected.
: Switches screen automatically according to parking lights illumination condition
*1
: Daytime screen setting
: Nighttime screen setting
*1: The display is constantly on daytime screen when the illuminat ion dim-
mer is cancelled.
Volume/Display/Sound Controls
Commander switchAudio control switch
Vo l u m e d i al
Vo l u m e
switch