jacking TOYOTA YARIS 2019 Owners Manual (in English)

YARIS SEDAN_OM_OM99S50z_(U)
5036-2. Flat Tire
6
If Trouble Arises
If your vehicle is equipped with
steel wheels, pry off the center
cap with the beveled end of the
jack lever.
Loosen the lug nuts by turning
them counterclockwise one turn
each, but do not remove any
lug nuts until the tire has been
raised off the ground.
Place the jack on the ground.
Turn the jack screw in the direc-
tion shown in the figure and
adjust the jack head so that it is
close to the jack-up position.
Place the jack under the jack-
up position closest to the tire
being changed with the jack
head squarely under the jack-
up point.
Removing a Flat Tire
1
2
3
Jack headQ
Jacking position
R

5046-2. Flat Tire
YARIS SEDAN_OM_OM99S50z_(U)
Continue raising the jack head
gradually by rotating the screw
with your hand until the jack
head is inserted into the jack-up
position.
Insert the jack lever and attach
the lug wrench to tire jack.
Turn the jack handle clockwise
and raise the vehicle high
enough so that the spare tire
can be installed. Before remov-
ing the lug nuts, make sure
your Toyota is firmly in position
and that it cannot slip or move.
Remove the lug nuts by turning them counterclockwise; then
remove the wheel and center cap.Tire blocks
Jacking
position6
7
8
9

YARIS SEDAN_OM_OM99S50z_(U)
5056-2. Flat Tire
6
If Trouble Arises
WARNING
■When jacking-up a vehicle, always shift the shift lever to 1st or R
(manual transaxle vehicle) or shift the selector lever to P (au tomatic
transaxle vehicle), apply the parking brake, and place wheel bl ocks
in the position diagonally opposed to the jack
Changing a flat tire without using wheel blocks is dangerous be cause
the vehicle may move and fall of f the jack even with the shift lever in 1st
or R, or the select lever is in P , which could result in an accident.
■Use only the front and rear jacking positions recommended in th is
manual
Attempting to jack the vehicle in positions other than those recom-
mended in this manual is dangerous. The vehicle could slip off the jack
and seriously injure or even kill someone. Use only the front and rear
jacking positions recommended in this manual.
■Do not jack up the vehicle in a position other than the designa ted
jack-up position or place any objects on or under the jack
Jacking up the vehicle in a position other than the designated jack-up
position or placing objects on or under the jack is dangerous a s it could
deform the vehicle body or the vehicle could fall off the jack resulting in
an accident.
■Use only the jack provi ded with your Toyota
Using a jack that is not designe d for your Toyota is dangerous. The vehi-
cle could slip off the jack and seriously injure someone.
■Never place objects under the jack
Jacking the vehicle with an objec t under the jack is dangerous. The jack
could slip and someone could be seriously injured by the jack o r the fall-
ing vehicle.
■Do not jack up the vehicle higher than is necessary
Jacking up the vehicle higher than is necessary is dangerous as it could
destabilize the vehicle resulting in an accident.
■Do not start the engine or shake the vehicle while it is jacked up
Starting the engine or shaking the vehicle while it is jacked u p is danger-
ous as it could cause the vehicle to fall off the jack resulting in an acci-
dent.
■Never go under the vehicl e while it is jacked up
Going under the vehicle while it is jacked up is dangerous as i t could
result in death or serious injur y if the vehicle were to fall off the jack.
■Use the jack lever when removing the center cap
Using your hands to remove it may cause an injury. In addition, using a
tool other than the jack lever may cause damage to the wheel or the
center cap.