chassis TOYOTA YARIS 2020 Warranties & Maintenance Guides (in English)

NITTO TIRE
163
Replacement tires for any vehicle must be of a size, load range, and
load capacity (by inflation) that is capable of supporting the same load
as the vehicle’s originally installed (OE) tires. Avoid installing used tires
on a vehicle. There is no way to determine what road hazards or abuse
a previously owned tire may have incurred.
The following procedures concerning replacement tires must
be followed:•
Confirm that the load-carrying capacity is greater than or equal
to the load-carrying capacity of the OE tire size at the pressure
indicated on the vehicle Tire Information Placard.
•
Carefully note any differences between recommendations for
front and rear axle positions regarding the tire size and/or
inflation pressure.
•
The speed rating must be equal to or greater than what is specified
by the vehicle manufacturer if the speed capability of the vehicle is
to be maintained.
•
Tires should be mounted on approved wheel widths. If changing
tire sizes, check to make sure the wheel has adequate load and
inflation pressure capacity.
•
Body and chassis clearance must be checked on the vehicle’s
front and rear axles.
In addition to the above, light truck tire replacements should take
into consideration the following:

PIRELLI
194
CAUTION :
Please be aware that it is important before fitting the suggested tires,
to ensure that the fitting is allowed by the technical specifications of
the vehicle, the vehicle manufacturer and relevant laws/regulations.
Pirelli does not express any view as to the compatibility of the wheel/
tire combination with the technical specifications for the chassis
and vehicle.
TO MAINTAIN VEHICLE DYNAMICS AND LOAD CARRYING
CAPACITY, REPLACEMENT TIRES MUST ALWAYS HAVE A LOAD
INDEX AND SPEED RATING THAT EQUALS OR EXCEEDS THAT
OF THE ORIGINAL EQUIPMENT TIRES OF THE VEHICLE. FOR
ADDITIONAL TIRE CARE RECOMMENDATIONS, PLEASE REFER
TO THE “TIRE CARE AND SERVICE” SECTION BELOW.
How to Initiate a Claim Under This Limited Warranty
To initiate a warranty claim, the Pirelli tire(s) must be returned to an
authorized Pirelli dealer. If the tire(s) are covered by this Limited
Warranty, the authorized Pirelli dealer will submit the tire to Pirelli.
Pirelli’s Tire Inspection Personnel will then provide the remedy if the
tire is covered by this Limited Warranty.
In order to initiate a claim under the terms of this Limited Warranty,
you must present the affected Pirelli tire(s) along with the proof of
purchase to an authorized Pirelli dealer. Once tires are returned to
Pirelli by an authorized Pirelli dealer and credit has been issued to
such dealer, submitted tires become the property of Pirelli. To locate
an authorized Pirelli dealer in your area, refer to the Dealer Locator a\
t
www.us.pirelli.com.
REMEDY LIMITATIONS (Effective 2/01/2019)
THE RIGHTS AND REMEDIES STATED IN THIS LIMITED
WARRANTY ARE PIRELLI’S ONLY RESPONSIBILITY, AND YOUR
ONLY REMEDIES. ALL OTHER REMEDIES ARE EXCLUDED.
IN NO EVENT SHALL PIRELLI BE RESPONSIBLE FOR ANY
CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGE(S) IN
CONNECTION WITH A PIRELLI TIRE, WHETHER FOR BREACH

PIRELLI
202
On all wheel drive or four wheel drive vehicles the tires must always
be replaced in sets of four. When replacing tires, you should always
follow the vehicle manufacturer’s recommendations. Passenger and
light truck tires are not interchangeable, due to differences in their
pressures and load carrying capacity.
P-Metric and Euro-Metric Interchangeability: Euro-Metric (Example:
225/45R17) tires have a load index which is equal to or greater than
that of the same size P-Metric (Example: P225/45R17) tire. Therefore,
they have the same or higher load carrying capacity at the maximum
rated inflation pressure. Always check with your tire dealer or Pirelli
Tire Consumer Affairs to check interchangeability to maintain proper
vehicle dynamics.
Please be aware that it is important, before fitting the suggested tires,
to confirm that the fitment is allowed by the technical specifications of
the vehicle, the vehicle manufacturer and the relevant homologations.
Pirelli does not express any view as to the compatibility of the wheel/
tire combination with the technical specifications for the chassis
and vehicle.
TO MAINTAIN VEHICLE DYNAMICS AND LOAD CARRYING
CAPACITY, REPLACEMENT TIRES MUST ALWAYS HAVE A LOAD
INDEX AND SPEED SYMBOL EQUAL TO OR GREATER THAN
THOSE FITTED AS ORIGINAL EQUIPMENT.
When installing plus size fitments, you should consult with the dealer
regarding any suspension or braking system modifications which may
be recommended for the vehicle.
Tire Inspection
As a minimum, tires should be examined and air pressure checked
monthly and always prior to long trips. They should also be examined
if you strike any unusual object on the road. Tires showing bulges,
cracks, cuts, penetrations or uneven wear must be dismounted and
examined by an authorized Pirelli dealer and replaced if necessary.
Pirelli tires have treadwear indicators in the tread grooves, which
clearly show when the tread has worn to 2/32” remaining. At this point,
your tires must be replaced because they do not meet the federal

TOYO TIRE
222
Replacement tires for any vehicle must be of a size, load range, and
load capacity (by inflation) that is capable of supporting the same load
as the vehicle’s originally installed (OE) tires. Avoid installing used tires
on a vehicle. There is no way to determine what road hazards or abuse
a previously owned tire may have incurred.
The following procedures concerning replacement tires must
be followed:•
Confirm that the load-carrying capacity is greater than or equal
to the load-carrying capacity of the OE tire size at the pressure
indicated on the vehicle Tire Information Placard.
•
Carefully note any differences between recommendations for
front and rear axle positions regarding the tire size and/ or
inflation pressure.
•
The speed rating must be equal to or greater than what is specified
by the vehicle manufacturer if the speed capability of the vehicle is
to be maintained.
•
Tires should be mounted on approved wheel widths. If changing
tire sizes, check to make sure the wheel has adequate load and
inflation pressure capacity.
•
Body and chassis clearance must be checked on the vehicle’s
front and rear axles.
In addition to the above, light truck tire replacements should take into\

consideration the following: