headlights TOYOTA YARIS LIFTBACK 2020 Owners Manual (in English)

OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
8 9
Automatic transmission (if equipped)
Manual transmission (if equipped)
FEATURES & OPERATIONS
Type AType B
Front fog lights turn on only when the headlights are on low beam.
TurnTurn
* The ignition switch must be “ON” and the brake pedal depressed t\
o shift from Park.
Downshifting increases power going uphill, or provides engine braking do\
wnhill. For
best fuel economy during normal driving conditions, always drive with th\
e shift lever
in the “D” position.
Park*P
ReverseR
NeutralN
DriveD
Third gear3
Second gear2
First gearL
Lights & turn signals
HEADLIGHTS
TURN SIGNALS
FRONT FOG LIGHTS (IF EQUIPPED)
Door-Back door lock/unlock
OPEN/CLOSE
Push
High beam flasherLow beam
High beam
Headlights
Parking lights DRL ON
OFF
Right turn
Lane change
Lane change Left turn

OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
18 19
FEATURES & OPERATIONS
Audio
ENTUNE™ AUDIO
NOTE: Concentrating on the road should always be your first priority while
driving. Do not use the Entune system if it will distract you. Refer to the “Navigation System Owner’s Manual” or the “2018 Entune
® Audio Quick
Reference Guide” for more details.
Push to display
audio screen Seek station/
CD track select
Push to turn
ON/OFF
Turn to tune radio
stations manually
or select tracks
SETUP
Button Push to display
Bluetooth
®
hands-free system
Eject CD
ENTUNE™ AUDIO PLUS WITH CONNECTED NAVIGATION APP
APPS Button
Access to traffic
and weather
HOME Button
Access to Home
screen.
HOME SCREEN - The home screen offers a two and three panel layout. Infor\
mation and layout will vary
depending on selected set up.
TOYOTA SAFETY SENSE
Toyota Safety Sense™ C (TSS-C) is a set of active safety technologies designed to
help mitigate or prevent collisions across a wide range of traffic situa\
tions, in certain
conditions. TSS-C is designed to help support the driver’s awareness,\
decision making
and vehicle operation contributing to a safe driving experience.
Refer to the Owner’s Manual for operation, setting adjustments, limit\
ations and
more details to understand these functions and complete safety precautio\
ns. For
more information, please go to http://www.toyota.com/safety-sense.
Laser sensor
Camera sensor
Quick overview-Toyota Safety Sense™ C (TSS-C)
Sensors
Pre-Collision System (PCS)PCS is designed to provide alert, mitigation, and/or avoidance
support in certain conditions, when the system detects a potential
collision with a preceding vehicle is likely to occur.
Lane Departure Alert (LDA)LDA is designed to provide notification when the system detects
an unintended lane departure.
Auto High Beams (AHB)
AHB is designed to detect the headlights of oncoming vehicles
and the tail lights of preceding vehicles and switch between high
beams and low beams as appropriate.
TSS-C combines an in-vehicle camera and laser mounted in front of the in\
side rear
view mirror. These sensors support the driver assist systems.

OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
24 25
Auto High Beams (AHB)
TOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
Doors-Child protector rear door locks
Seat belts
NOTE: If a passenger’s seat belt is fully extended, then retracted even slightly,
the Automatic locking retractor (ALR) will prevent it from being re-extended
beyond that point, unless fully retracted again. This feature is used to help
hold child restraint systems securely.
To find more information about seat belts, and how to install a child re\
straint
system, refer to the Owner’s Manual.
Keep as low on
hips as possible
Take up slack
Too high
Moving the lever to downward will allow the door to be opened only from \
the outside.
Rear door
(5-door models only)
ACTIVATING THE AHB SYSTEM
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
(1)(2)
(1) With the engine switch in IGNITION ON mode and headlight switch tu\
rned to
position, push lever away from you.
(2) Depress the Automatic High Beam “AUTO” switch. The
indicator will come on when the headlights are turned on
automatically to indicate that the system is active.
Note: Pull the lever back toward you to turn the AHB system off.
The
indicator will turn off and the high beam indicator turns on.
Refer to the Owner’s Manual for limitations and more details on this \
system. When all of these conditions are met, high beams will be automatically t\
urned on
(after approximately 1 second):
• Vehicle speed is above approximately 25 mph (40 km/h).
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail lights turned
on.
If any of these conditions occur, high beams will be automatically turne\
d off:
• Vehicle speed drops below approximately 19 mph (30 km/h).
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights turned on.
• There are many streetlights on the road ahead. AHB is a safety system designed to help drivers see more of what’s ah\
ead at nighttime
without dazzling other drivers. When enabled, AHB uses an in-vehicle cam\
era to
help detect the headlights of oncoming vehicles and tail lights of prece\
ding vehicles,
then automatically switches between high and low beams as appropriate to\
provide
the most light possible and enhance forward visibility. By using high be\
ams more
frequently, the system may allow earlier detection of pedestrians and ob\
stacles.
Refer to the Toyota Owner’s Manual for additional information on AHB \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it.