VAUXHALL COMBO 2014 Owner's Manual

Service and maintenance159Recommended fluids,
lubricants and parts
Recommended fluids andlubricants
Only use products that meet the
recommended specifications.
Damage resulting from the use of
products not in line with these
specifications will not be covered by
the warranty.9 Warning
Operating materials are
hazardous and could be
poisonous. Handle with care. Pay
attention to information given on
the containers.
Engine oil
Engine oil is identified by its quality
and its viscosity. Quality is more
important than viscosity when
selecting which engine oil to use. The oil quality ensures e.g. engine
cleanliness, wear protection and oil
ageing control, whereas viscosity
grade gives information on the oil's
thickness over a temperature range.
Dexos is the newest engine oil quality
that provides optimum protection for petrol and diesel engines. If it is
unavailable, engine oils of other listed qualities must be used.
Recommendations for petrol engines
are also valid for Compressed Natural
Gas (CNG) fuelled engines.
Select the appropriate engine oil
based on its quality and viscosity
3 162.
Topping up engine oil
Engine oils of different manufacturers and brands can be mixed as long as
they comply with the required engine
oil quality and viscosity.
Use of engine oil with only
ACEA A1/B1 or only A5/B5 quality is
prohibited, since it can cause long-
term engine damage under certain
operating conditions.
Select the appropriate engine oil
based on its quality and viscosity
3 162.Additional engine oil additives
The use of additional engine oil
additives could cause damage and
invalidate the warranty.
Engine oil viscosity
The SAE viscosity grade gives
information on the thickness of the oil.
Multigrade oil is indicated by two
figures, e.g. SAE 5W-30. The first
figure, followed by a W, indicates the low temperature viscosity and the
second figure the high temperature viscosity.
Select the appropriate viscosity grade 3 162.
All of the recommended viscosity
grades are suitable for high ambient
temperatures.
Coolant and antifreeze
Use only antifreeze approved for the
vehicle. Consult a workshop.
The system is factory filled with
coolant designed for excellent
corrosion protection and frost
protection down to approx. -28 °C. In
northern countries with very low

160Service and maintenance
temperatures the factory filled coolant
provides frost protection down to
approx. -37°C. This concentration
should be maintained all year round.
The use of additional coolant
additives that intend to give additional
corrosion protection or seal against
minor leaks can cause function
problems. Liability for consequences
resulting from the use of additional
coolant additives will be rejected.
Brake and clutch fluid Only use high-performance DOT 4+brake fluid approved for the vehicle.
Consult a workshop.
Over time, brake fluid absorbs
moisture which will reduce braking
effectiveness. The brake fluid should therefore be replaced at the specified interval.
Brake fluid should be stored in a
sealed container to avoid water
absorption.
Ensure brake fluid does not become
contaminated.

Technical data161Technical dataVehicle identification..................161
Vehicle data ............................... 162Vehicle identification
Vehicle Identification
Number
The Vehicle Identification Number is
visible through the windscreen
and in the floor on the front passenger
side behind a cover.
Identification plate The identification plate is in the
engine compartment.

162Technical data
Information on identification label:
1=Type approval number2=Vehicle Identification
Number3=Vehicle type identification
code4=Permissible gross vehicle
weight rating in kg5=Permissible gross train
weight in kg6=Maximum permissible front
axle load in kg7=Maximum permissible rear
axle load in kg8=Engine type9-11=Vehicle-specific or country-
specific data
The combined total of front and rear
axle loads must not exceed the
permissible gross vehicle weight. For
example, if the front axle is bearing its
maximum permissible load, the rear
axle can only bear a load that is equal
to the gross vehicle weight minus the front axle load.
The technical data is determined in
accordance with European
Community standards. We reserve
the right to make modifications.
Specifications in the vehicle
documents always have priority over
those given in this manual.
Vehicle data
Recommended fluids and
lubricants
Required engine oil qualityEngine oil
qualityPetrol /
CNG
enginesDiesel
enginesdexos 2✔✔
In case dexos quality is unavailable in
International countries you may use
the oil qualities listed below:
Engine oil
qualityPetrol /
CNG
enginesDiesel
enginesGM-LL-
A-025✔-GM-LL-
B-025-✔

Technical data163
Engine oil viscosity gradesEngine oil
viscosity
gradePetrol /
CNG
enginesDiesel
enginesSAE 0W-30-✔SAE 0W-40✔-

164Technical dataEngine dataSales designation1.41.41.4Engine identifier code1.4i1.4Turbo1.4CNGNumber of cylinders444Piston displacement [cm3
]136813681368Engine power [kW]708888at rpm600050005000Torque [Nm]127206206at rpm450030003000Fuel typePetrolPetrolCompressed Natural Gas/PetrolOctane rating RONrecommended959595possible989898possible919191Gas––CNGOil consumption [l/1000 km]0.60.60.6

Technical data165
Sales designation1.3 Turbo1.6 Turbo2.0 TurboEngine identifier code1.3CDTI1.6CDTI1)2.0CDTINumber of cylinders444Piston displacement [cm 3
]124815981956Engine power [kW]6666 / 7799at rpm400040003500Torque [Nm]200200 2)
/ 290320at rpm150015001500Fuel typeDieselDieselDieselOil consumption [l/1000 km]0.60.60.61) Low / High output.
2) Vehicles with manual transmission automated (MTA).

166Technical dataPerformance
The maximum speed indicated is achievable at kerb weight (without driver) plus 200 kg payload. Optional equipment could reduce the specified maximum speed of the vehicle.Engine1.4i1.4Turbo1.4CNGMaximum speed [mph]Manual transmission100107107Manual transmission automated–––Engine1.3CDTI1.6CDTI 3)2.0CDTIMaximum speed [mph]Manual transmission98 / 955)102 / 98 4)
/ 95 5)111Manual transmission automated– / –– / 98 4)
/ 95 5)–3)
Low / High output.
5) High roof version.
4) Low roof version.

Technical data167Vehicle weight
Kerb weight, basic model - VanLengthRoof heightEngineGross vehicle weightKerb weightL1H11.4i1990 / 21601240 / 12601.4Turbo– / 2325– / 14001.4Turbo CNG2430 / –1450 / –1.3CDTI2020 / 22901270 / 12901.6CDTI2060 / 23301310 / 13302.0CDTI2100 / 23701350 / 1370H21.4i2010 / 21801260 / 12801.4Turbo– / 2345– / 14201.4Turbo CNG2420 / –1470 / –1.6CDTI2080 / 23501330 / 13502.0CDTI2120 / 23901370 / 1390

168Technical data
LengthRoof heightEngineGross vehicle weightKerb weightL2H11.4i2200 / –1300 / –1.4Turbo2365 / –1440 / –1.4Turbo CNG2470 / 24501490 / 15401.3CDTI2330 / –1330 / –1.6CDTI2370 / –1370 / –2.0CDTI2410 / –1410 / –H21.4Turbo245514551.6CDTI246014602.0CDTI25001500