ECO mode VAUXHALL MOVANO_B 2014.5 Infotainment system

Phone87
Switch the call from the handsfree
phone system to the mobile phone by selecting Handset. Some mobile
phones may become disconnected
from the handsfree phone system
during the switch to this mode.
A number can also be entered on the
numerical keyboard ( 3 71) e.g. to
control a voice server such as the
voicemail box. Select the Keyboard
menu item to access the numerical
keyboard. Refer to Voicemail box for
further information.
To end the call, depending on vehicle configuration:
■ Press the 8 button
■ Select Hang up then press the
MODE/OK button
CD35 BT - Functions during a
telephone call
In addition to volume control, various
functions are available during a call,
including:
■ Pause / Resume
■ Handset■Keyboard
■ Hang up
To put the caller on hold, select
Pause ; the caller is informed they are
on hold via an automatic message.
Select Resume to resume the call.
Switch the call from the handsfree
phone system to the mobile phone by selecting Handset. Some mobile
phones may become disconnected
from the handsfree phone system
during the switch to this mode.
A number can also be entered on the
numerical keyboard ( 3 71) e.g. to
control a voice server such as the
voicemail box. Select the Keyboard
menu item to access the numerical
keyboard. Refer to Voicemail box for
further information.
To end the call: ■ Press the 8 button, or
■ Select Hang up, then press the
central rotary knobPhone settings
CD30 BT - Phone settings
Press the 0 button and select the
Phone settings menu.
When phone setting adjustments
have been made, press 0 to exit the
menu and save changes. The system
also saves and exits automatically
after a delay.
Activate/deactivate automatic call
waiting
To activate or deactivate automatic
call waiting, access the Put on hold
menu, then select either Automatic
(the default setting) or Manual.
Change ringtones
The vehicle ringtone or phone
ringtone can be changed for incoming calls. Access the Ring tone menu,
then select Vehicle or Phone .
Notice
Depending on phone model, the
ringtone transfer function may not be
available.

88Phone
Restore default phone settings
To restore phone settings to their
default values, select Default
settings by turning and pressing the
rotary knob. Confirm modification with
the display option when prompted.
Display software version
To display the software version,
select Display software version by
turning and pressing the rotary knob.
CD35 BT - Phone settings
Press the SETUP / TEXT button and
select the Phone settings menu.
Activate/deactivate automatic call
waiting
To activate or deactivate automatic
call waiting, access the Put on hold
menu, then select either Automatic
(the default setting) or Manual.
During automatic mode, a tone will
sound to indicate that a call is on hold.Change ringtones
The vehicle ringtone or phone
ringtone can be changed for incoming
calls. Access the Ring tone menu,
then select Vehicle or Phone .
Notice
Depending on phone model, the
ringtone transfer function may not be
available.
Restore default phone settings
To restore phone settings to their
default values, select Default
settings by turning and pressing the
rotary knob. Confirm modification with the display option when prompted.
Display software version
To display the software version,
select Display software version by
turning and pressing the rotary knob.Mobile phones and CB
radio equipment
Installation instructions and operating guidelines The vehicle specific installation
instructions and the operating
guidelines of the mobile phone and
handsfree manufacturer must be
observed when installing and
operating a mobile telephone. Failure to do so could invalidate the vehicle
type approval (EU directive 95/54/
EC).
Recommendations for fault-free
operation:
■ Professionally installed exterior antenna to obtain the maximum
range possible,
■ Maximum transmission power 10 watts,
■ Installation of the phone in a suitable spot, consider relevant
Note in the Owner's Manual section
Airbag system .