handbrake VOLKSWAGEN CORRADO 1990 Repair Manual

STARTER - BOSCH
Article Text (p. 4)
1990 Volkswagen Corrado
For Volkswagen Technical Site: http://vw.belcom.ru
Copyright © 1998 Mitchell Repair Information Company, LLC
Thursday, March 23, 2000 09:51PM
remove upper starter mounting bolt. Release handbrake (to allow axle
rotation) and raise vehicle on hoist.
2) Disconnect right rear axle from transmission and wire
aside. Cover exposed CV joint with plastic bag to prevent entry of
dirt or other foreign material.
3) Loosen clamp securing cooling hoses to chassis. Wire hoses
aside. Remove bolt "A" from differential lock servo. Loosen bolt "B"
and withdraw as far as possible. Lack of clearance prevents complete
removal of bolt "B". See Fig. 1.
NOTE: Nuts are welded to bracket. DO NOT attempt to loosen.Fig. 1: Removing Differential Lock Servo (Vanagon)
Courtesy of Volkswagen United States, Inc.
4) Push back protective sleeve and drive out spring pin. With
bolt "B" withdrawn as far as possible, give servo a slight upward
twist and remove from bracket. See Fig. 1.
5) Remove circlip, bracket securing bolts and bracket. See
Fig. 2.Fig. 2: Removing Differential Lock Servo Bracket (Vanagon)
Courtesy of Volkswagen United States, Inc.