wheel VOLKSWAGEN JETTA 1998 Repair Manual

Downloaded from www.Manualslib.com manuals search engine 01-160


Access to the OBD is only possible when the
vehicle is stationary and ignition turned on
(or engine running).

Wheel bearings and wheel bearing play are
OK.

When checking the ABS system make sure
that the vehicle electric system is not
affected by electro-magnetic interference,
i.e. the vehicle is kept away from equipment
with a high current draw, e.g. from an electric
welding module.

Safety precautions

WARNING!

You must always secure testing and
measuring equipment on the rear seat.

When vehicle is being driven, a second
technician must operate this equipment.
Стр. 2из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-166


System designation (ESP).

Type of drive (front wheel).

ABS (Mark 60).

Control module coding (0011266).
Coding control module Page 01
-232 .
Workshop code
V.A.G 1551 scan tool operating
instructions
If the control module identification number
does not appear; Summary of functions
Page 01
-168 .

-
Press key.
Rapid data transfer HELP
Select function XX Indicated on display (select function, e.g. 02
- Interrogate fault memory).
Rapid data transfer HELP
Control module does not answer! Indicated on display:
- By pressing the HELP key, a list of
possible fault causes is printed out.
- After eliminating the possible causes of
malfunctions, enter the address word 03
for "Brake electronics" again and
confirm.
Стр. 8из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-172


Output Diagnosic Test Mode (DTM)

Note:

All functions which could previously be
performed with V.A.G 1551 can now also be
carried out with the tester VAS 5051.

The pump motor and the correct functioning of
the hydraulic circuits (allocation of brake lines to
wheel cylinders and function of valves) can be
checked via the output DTM for interchange or
leaks.

The vehicle must be raised until all wheels are
free to turn. (2nd mechanic required to rotate
wheels)

The -C- key can be used to exit the test
sequence at any time.

After depressing the brake pedal several times
the vacuum in the brake booster will be
exhausted. Therefore more pressure must be
applied to the brake pedal in order to attain the
same fluid pressure in brake system, as that
attained with vacuum.

When vacuum in brake booster is exhausted it
can happen that the wheels do not lock; start
engine and build-up vacuum in brake booster.
Стр. 14из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-173



Example:
Indicated on V.A.G 1551 display during Output
DTM:
(e.g. front left wheel, FL)

Output Diagnosic Test Mode -
IFL: VBAT OFL: 0V Wheel FL locked
IFL = Inlet valve Front Left
VBAT = Voltage Battery; Voltage at valve
OFL = Outlet valve Front Left
0V = 0 Volt; No voltage at valve
Locked/free = Wheel condition; must be
checked by 2nd mechanic if required

Output Diagnosic Test Mode -
EDL valves/Hyd-P: VBAT Wheel FL/FR
locked
Hydr-P = Hydraulic pump
Стр. 15из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-175


Rapid data transfer HELP
Select function XX Indicated on display
- Press keys 0 and 3
Rapid data transfer Q
03 - Out
put Diagnosic Test Mode
Indicated on display
ABS hydraulic pump -V64- must run. - Confirm entry with key Q.
Output Diagnosic Test Mode
-
ABS hydraulic pump - V64
Indicated on display
-
Press key.
Output Diagnosic Test Mode
-
Operate brakes
Indicated on display
- Operate brake pedal.
-
Press key.
Output Diagnosic Test Mode
-
IFL: 0V OFL: 0V Wheel FL locked
Indicated on display
Note:
If the wheel does not lock, there is a
possibility that there is a malfunction in the
mechanical/hydraulic part of the brake
system. - Indicate to 2nd mechanic which wheel
requires turning by hand.
Стр. 17из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-176



-
Press key.
Output Diagnosic Test Mode
-
IFL: VBAT OFL: 0V Wheel FL locked
Indicated on display
ABS hydraulic pump -V64- must run.
Brake pedal must not give.
If the brake pedal gives, there is a
malfunction in the hydraulic unit. In this
case the hydraulic unit must be replaced.
Repair Manual, Brake System, Repair
Group 45 -
Press key.
Output Diagnosic Test Mode
-
IFL: VBAT OFL: VBAT Wheel FL free
Indicated on display
Note:
If the wheel locks there is a possibility that
the brake lines to the wheel
calipers/cylinders have been interchanged. - Indicate to 2nd mechanic which wheel
requires turning by hand.
Стр. 18из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-177



-
Press key.
ABS hydraulic pump -V64 no longer runs.
Output Diagnosic Test Mode
-
IFL: VBAT OFL: 0V Wheel FL free
Indicated on display
Brake pedal must give perceptibly
If the brake pedal does not give, there is a
malfunction in the hydraulic unit. In this
case the hydraulic unit must be replaced.
Repair Manual, Brake System, Repair
Group 45 -
Press key.
Output Diagnosic Test Mode
-
IFL: 0V OFL: 0V Wheel FL locked
Indicated on display
Note:
If the wheel does not lock, there is a
possibility that there is a malfunction in the
mechanical/hydraulic part of the brake
system. - Indicate to 2nd mechanic which wheel
requires turning by hand.
Стр. 19из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-178



-
Press key.
Output Diagnosic Test Mode
-
Release brakes
Indicated on display
- Remove foot from brake pedal.
-
Press key.
Output Diagnosic Test Mode
-
Operate brakes
Indicated on display
- Operate brake pedal.
-
Press key.
Output Diagnosic Test Mode
-
IFR: 0V OFR: 0V Wheel FR locked
Indicated on display
Note:
If the wheel does not lock, there is a
possibility that there is a malfunction in the
mechanical/hydraulic part of the brake
system. - Indicate to 2nd mechanic which wheel
requires turning by hand.
Стр. 20из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-179



-
Press key.
Output Diagnosic Test Mode
-
IFR: VBAT OFR: 0V Wheel FR locked
Indicated on display
ABS hydraulic pump -V64- must run.
Brake pedal must not give
If the brake pedal gives, there is a
malfunction in the hydraulic unit. In this
case the hydraulic unit must be replaced.
Repair Manual, Brake System, Repair
Group 45 -
Press key.
Output Diagnosic Test Mode
-
IFR: VBAT OFR: VBAT Wheel FR free
Indicated on display
Note:
If the wheel locks there is a possibility that
the brake lines to the wheel
calipers/cylinders have been interchanged. - Indicate to 2nd mechanic which wheel
requires turning by hand.
Стр. 21из 129 On Board Diagnostic (OBD), performing

Downloaded from www.Manualslib.com manuals search engine 01-180



-
Press key.
ABS hydraulic pump -V64- no longer runs.
Output Diagnosic Test Mode
-
IFR: VBAT OFR: 0V Wheel FR free
Indicated on display
Brake pedal must give perceptibly
If the brake pedal does not give, there is a
malfunction in the hydraulic unit. In this
case the hydraulic unit must be replaced.
Repair Manual, Brake System, Repair
Group 45 -
Press key.
Output Diagnosic Test Mode
-
IFR: 0V OFR: 0V Wheel FR locked
Indicated on display
Note:
If the wheel does not lock, there is a
possibility that there is a malfunction in the
mechanical/hydraulic part of the brake
system. - Indicate to 2nd mechanic which wheel
requires turning by hand.
Стр. 22из 129 On Board Diagnostic (OBD), performing