key VOLKSWAGEN TOUAREG 2014 2.G Repair Manual

After pressing the corresponding function key, the destination can be stored in the directory
Storing in directory

Fig. 189 Storing in directory.

Fig. 190 Editing a directory entry.

x If the check box in the = Display as favorite function key is checked, the destination will also be
stored in the Favorites ) list ⇒ page 308.
x Press the Store entry function key to store the destination.
The destination is now stored under the entered name and the selected category in the Directory menu.
Managing the directory

Fig. 191 Address book opened for editing.

Function key: Effect
Create new telephone numbers : Opens an input window where you can enter a telephone number manually.
Create business navigation destination : Opens a menu where you can select a navigation destination for the “Business P” favorites category or convert a stored mailing address into a navigation destination
Create business mailing address : Opens a menu to enter a mailing address manually in input windows.
Create private navigation destination : Opens a menu where you can select a navigation destination for the “Private T” favorites category or convert a stored mailing address into a navigation
destination ⇒ page 307.
Create private mailing address : Opens a menu to enter a mailing address manually in input windows.
Read contact : The voice command stored under Last name and First name is read out
⇒ page 234.
= Private contact : The directory entry is only displayed when the corresponding user profile is loaded. If the check box = is cleared, the directory entry is transferred to the general user profile and is always displayed
If the prefix Create ... is not displayed in a function key, corresponding information is already stored.
This information is displayed below the function key (such as in : Business navigation destination ).
Press the function key to display or modify the stored information ⇒ fig. 195.
Converting mailing addresses into navigation destinations
Information that is stored as Business mailing address or Private mailing address can be converted into navigation destinations, such as the telephone directory entries of a connected mobile phone.
x Press the Create private navigation destination or Create business navigation destination button.
x Press the Create navigation destination function key.
The mailing address is converted into a navigation destination in the Infotainment System and
displayed in the Address entry menu where it can be edited further ⇒ page 287.
x Touch the OK function key.
The mailing address is now stored as a navigation destination. The navigation destination is displayed and can be edited again.
x Press the E function key to close the menu.

Function key: Effect
Delete profiles : Press the profile to be deleted in the list of stored user profiles and accept the
confirmation dialog with Delete .
Change profile name15: Renames currently loaded profile in an input window
Read name tags16: Reads out recorded name tags
Delete name tags16: Deletes recorded name tags
Import directory15: Starts an immediate import of directory entries from a connected mobile phone to the directory.
Import contacts : Imports navigation data (VCards) from an inserted data medium into the directory
⇒ page 308.
Export contacts : Copies selected directory entries on an inserted data medium
Storing or editing the home address

Fig. 200 Menu: Destination entry.

Fig. 201 Menu: New home address.
15 Only active when a mobile phone or a SIM card is currently connected to the Infotainment System 16 Only active if name tags have been recorded for directory entries

The Starting point 2 of a tour cannot be changed in the Tour plan menu. It is always determined by the current vehicle position. The Add stopover function key is only available via the H function key.
x Press the

x OR: Press the Change tour function key to show all tours in a list and then press the H function key to rename or delete individual tours.
Leaving Tour mode

Start whole tour : Will start the entire waypoint tour. In the menu that follows you will have to select how the start point of the waypoint tour should be reached.
On road : The start point for the route guidance will be reached using public roads as far as possible.
Off-road : The start point for route guidance will be reached in off-road mode and any available roads will not be used.
When route guidance starts, the system will switch to the map view.
An audible signal is given when the starting point of the waypoint tour has been reached.
During route guidance
Characteristics of the terrain are ignored during route guidance. A driving recommendation will be given about 55 yards (50 meters) before reaching a turning point. You should therefore drive slowly and follow recommendations for turning as far as possible!
Changes in the direction of travel will be given in relation to the current direction of travel, such as “Please travel in direction 9 o'clock!”.
The tendency of the direction of travel will be shown in the instrument cluster display using arrows.
Stopping route guidance
x Press the Infotainment button NAV in the map display to open the Waypoint navigation menu.
x Press the Stop function key.
Stopping waypoint navigation

Fig. 214 Waypoint navigation menu.

Dynamic route: Switching dynamic route guidance on or off
With this option, traffic reports can be taken into account in the route calculation
x In the Route options menu, press the Dynamic route function key.
x In the pop-up window, press the On or Off function key to enable or disable dynamic route guidance.
Excluding or including types of route in the calculation
Press the  Highways , ! Ferries , Toll roads and " Tunnels function keys to activate or deactivate them. This makes it possible to define whether these types of route should be allowed for the route calculation or not.
If no reasonable route exists without the road type to be avoided, this road type will be nevertheless considered in the route calculation. For instance, if an island cannot be reached without using a ferry. For the calculation of very long routes, it is not possible to avoid highways .
Starting and stopping route guidance

Fig. 217 3D map display during route guidance.

Fig. 218 Navigation main menu during route guidance.

x Press the NAV Infotainment button or the ... ... function key to switch to the Navigation main menu.
x In the Navigation main menu, press the NAV Infotainment button or MAP function key to switch back to the map view.
The map is displayed in the most recently selected type (2D or 3D). 3D and “Autozoom” are activated by default
Alternative routes: Selecting a calculated route
In the Navigation settings menu, you can specify that 3 alternative routes are suggested on the map after the start of route guidance. These 3 routes correspond to the available route criteria Fast, Short and Economical route. Route 1 corresponds to the current setting in this case.
x Select the required route by pressing on the right of the map.
The setting for the route criteria in the Route options menu is changed accordingly.
If no route is selected then route guidance starts automatically after about one minute, using the setting selected in the Route options.
Interrupting route guidance
Active route guidance can be stopped and later resumed from the new vehicle position at any time in the Navigation main menu.
x In the Navigation main menu, press the Stop function key ⇒ fig. 218.
x Press the Start function key to continue route guidance ⇒ fig. 215.
Provision of navigation recommendations

Fig. 219 3D map display during route guidance.

During route guidance, you can manually exclude the route section immediately ahead of your current location. The route exclusion is revoked when route guidance is stopped.
x In the Navigation main menu, press the Route function key ⇒ fig. 218.
x In the pop-up window, press the Avoid area function key.
The Avoid area menu opens. The length of the stretch to be excluded from the current vehicle position.
x Press the ` function key to specify up to which route section the route ahead should be blocked.
x Press the a function key to shorten the route exclusion.
x Press the OK function key to confirm the exclusion entry.
In the Navigation main menu ⇒ fig. 218, the icon for an active route exclusion