buttons VOLVO C70 CONVERTIBLE 2007 Owner´s Manual

2007 Volvo C70
risk of condensation forming on the insides of the windows, especially i\
n winter.
Timer
The timer function minimizes the risk of fogging, or stale air when the \
recirculation function is selected.
See
page 73 for information on setting the recirculation timer.
NOTE
Recirculation is always disengaged if the defroster button is engaged to\
clear ice or condensation from
the side windows.
4. Defroster
Directs airflow to the windshield and side windows and increases blower \
speed.
When the defroster is activated:
l Air flows to the windows at high blower speed.
l The LED in the defroster button lights up when this function is activate\
d. The air conditioning system
is controlled to provide maximum air dehumidification.
l The air conditioning is automatically switched on (can be switched off \
by pressing button 5).
The air is not recirculated.
5. Airflow controls
Press one of the three buttons in the illustration to activate the selec\
ted airflow. A symbol
in the display above the climate control panel and a lit LED in the sele\
cted button indicate that the manual
function has been selected. With manually selected airflow both warm and\
cool air can be selected. See
also the table on
page 85.
6. Air conditioning On/Off
file:///K|/delme/2007_C70/07c70_03.htm (6 of 10)12/22/2006 9:15:43 PM

2007 Volvo C70
The power driver's seat can be adjusted:
l If the ignition key is in position I or II.
l During a 10 minute period after the doors have been unlocked if the door\
remains open.
l If the door is closed and the ignition key is not yet in the ignition, o\
r if the key is in position 0, the seat
can be adjusted or during a period of 40 seconds. The power passenger's \
seat can only be adjusted if the
ignition key is in position I or II, or if the engine is running.
Adjusting the seat
Seat adjustment controls 1, 2, 3, and 4 on the side of the seat can be u\
sed to move the seat to the position
of your choice.
1. Move this section of the control up or down to raise/lower the front \
section of the seat cushion.
2. Move the control forward/rearward to move the seat forward or rearwar\
d.
3. Move this section of the control up or down to raise/lower the rear s\
ection of the seat cushion.
4. Backrest tilt.
NOTE
The power seats have an overload protector that activates if a seat is b\
locked by any object. If this
occurs, switch off the ignition (key in position 0) and wait for appro\
ximately 20 seconds before
operating the seat again.
Emergency stop
If the seat inadvertently begins to move, press any of the buttons to st\
op the seat.
Programming the seat memory, driver's seat only (option)
file:///K|/delme/2007_C70/07c70_04.htm (5 of 27)12/22/2006 9:15:45 PM

2007 Volvo C70
Three different seating positions (and the position of the door mirrors\
) can be stored in the seat's memory.
The memory buttons are located on the outboard side of the driver's seat\
(see the illustration above).
The following example explains how memory button 1 can be programmed. Bu\
ttons 2 and 3 can be
programmed in the same way.
To program (store) a seat position in memory button 1:
1. Adjust the seat (and door mirrors) to the desired position (see th\
e instructions above).
91 04 Interior
Front seats
2. Press and hold down the "M" (Memory) button.
3. With the "M" button depressed, press memory button 1 to store the sea\
t's current position.
To move the seat to the position that it was in when memory button 1 was\
programmed, press and hold
down button 1 until the seat stops moving.
As a safety precaution, the seat will stop automatically if the button i\
s released before the seat has reached
the preset position.
Central locking system remote control and driver's seat memory
The remote control transmitter can also be equipped with an optional fun\
ction that controls the electrically
operated driver's seat and door mirrors in the following way:
file:///K|/delme/2007_C70/07c70_04.htm (6 of 27)12/22/2006 9:15:45 PM

2007 Volvo C70
WARNING
l The power retractable hard top must not be obstructed in any way when it\
is being operated. Always
have an unobstructed view of the power retractable hard top when it is i\
n motion. See also the decal on
the trunk divider.
l Anyone near the vehicle should be well clear of the power retractable ha\
rd top's moving parts before
it is operated.
l Children must never be allowed to play with the power retractable hard t\
op control buttons.
l Do not leave the power retractable hard top motionless longer than neces\
sary while it is being
operated
l Do not leave the key in the ignition if there are children in the vehicl\
e.
93 04 Interior
Power retractable hard top
Trunk divider
The purpose of the trunk divider is to indicate the amount of cargo that\
can be stowed in the trunk without
affecting movement of the power retractable hard top.
To open, grasp the handle and lift.
To close, pull the trunk divider rearward.
Be sure to close the trunk divider completely so that it locks in place \
on both the right and left sides.
file:///K|/delme/2007_C70/07c70_04.htm (9 of 27)12/22/2006 9:15:45 PM

2007 Volvo C70
The rear reading lights can be switched on or off by pressing the respec\
tive buttons.
Courtesy lighting - automatic function
The interior lighting has a built-in automatic function that switches on\
the courtesy lighting for 30
seconds when:
l the car is unlocked from the outside using the key or remote control
l the engine is switched off and the ignition key is turned to the 0 posit\
ion.
The courtesy lighting lights up or remains on for 5 minutes when:
l one of the doors is opened and left open.
l the courtesy lighting has not been switched off (the right side of butt\
on 2 depressed).
The automatic lighting goes out when:
l the engine is started
l the car is locked from the outside using the key or remote control.
If the courtesy lighting is not switched off manually, it will be turned\
off automatically 5 minutes after the
engine has been switched off.
99 04 Interior
Interior lighting
Vanity mirror
Raise the cover to switch on the light.
file:///K|/delme/2007_C70/07c70_04.htm (18 of 27)12/22/2006 9:15:45 PM\

2007 Volvo C70
Selecting a sound source
l Press AM/FM (2) repeatedly to toggle between FM1, FM2, and AM.
l Press MODE (3) repeatedly to toggle between the CD player and the optional exter\
nal sound source
AUX or the optional Sirius satellite radio.
The currently selected sound source will be shown in the display.
AUX (option)
The AUX (auxiliary) port can be used to connect for example, an mp3 pl\
ayer.
If the player is being charged through a 12-volt socket while it is conn\
ect to the AUX port, sound quality
may be impaired.
The volume of the external sound source AUX may be different from the vo\
lume of the internal sound
sources such as the CD player or the radio. If the external sound source\
's volume is too high, the quality
of the sound may be impaired.
This can be prevented by adjusting the external sound source's input vol\
ume.
1. Select AUX by pressing MODE.
2. Press MENU followed by ENTER.
3. Select AUX INPUT VOLUME in the menu and press ENTER.
4. Turn the TUNING dial or press the left or right arrows keys to adjust the volume.
Volume
Use the volume dial (1) or the buttons in the optional steering wheel \
keypad to adjust the volume level.
The volume level is also adjusted automatically according to the vehicle\
's speed, see
page 220 for more
information on this function.
219 10 Audio
Audio functions
Steering wheel keypad (option)
file:///K|/delme/2007_C70/07c70_10.htm (3 of 23)12/22/2006 9:15:56 PM

2007 Volvo C70
The four buttons on the steering wheel keypad can be used to control the\
audio system. The steering
wheel keypad can be used to adjust volume, shift between preset stations\
and change CD tracks. Press one
of the two left-hand buttons briefly to change to the next/previous pres\
et radio station, or to go to the next/
previous track on a CD. Press and hold down these buttons to search with\
in a track on a CD.
Daytime/twilight display
In daylight the information is displayed against a light background. In \
darkness it is displayed against a
dark background.
Sound settings
1. Press SOUND (5). Press this button repeatedly until you come to the setting that y\
ou wish to change.
2. Turn the TUNING dial (4) to make the desired setting.
The following settings can be made:
BASS - set the bass level
TREBLE - set the treble level
BALANCE - set the left/right sound balance
FADER - set the front/rear sound balance
SUBWOOFER (accessory) - set the level for the subwoofer (bass speaker)
CENTER - make settings for the center speaker
file:///K|/delme/2007_C70/07c70_10.htm (4 of 23)12/22/2006 9:15:56 PM

2007 Volvo C70
3. Select AUTO. VOLUME CONTROL in the menu and press ENTER.
4. Select LOW, MEDIUM, or HIGH and press ENTER.
1Default setting
221 10 Audio
Radio functions
Radio function controls
1. AM/FM1/FM2 selection
2. Station preset buttons
3. TUNING dial for selecting radio stations
4. SCAN
5. MENU NAVIGATION CONTROL-press the up or down arrow keys to scroll in a menu, or the keys
on the left/right sides of the control to search for or change radio sta\
tions/CD tracks
6. EXIT-press to cancel a menu selection or a selected function
7. AUTO-search for and store the strongest radio stations in the area in which \
you are driving
file:///K|/delme/2007_C70/07c70_10.htm (7 of 23)12/22/2006 9:15:56 PM

2007 Volvo C70
Searching for stations
There are two ways to manually tune a radio station:
1. Turn the TUNING dial (3) to the desired frequency.
2. Press the left or right arrow key on the MENU NAVIGATION CONTROL and hold it down. The radio
scans slowly in the selected direction and will increase the scanning sp\
eed after a few seconds. Release
the button when the desired frequency appears in the display.
The frequency can be fine-tuned by short presses on the left/right arrow\
keys.
Storing preset stations
Manually storing a station
1. Tune to the desired station.
2. Press and hold the preset button under which the station is to be sto\
red. The audio system sound will be
interrupted for a few seconds and STATION STORED will appear in the display.
NOTE
A total of 30 stations can be stored; 10 stations each in AM, FM1 and
FM2.
Automatically storing a station
Pressing AUTO (7) automatically searches for and stores up to ten strong AM or FM s\
tations in a
separate memory. If more than ten stations are found, the ten strongest \
ones are stored. This function is
especially useful in areas in which you are not familiar with radio stat\
ions or their frequencies.
To use the AUTO function:
1. Select a waveband using the AM/FM button (1).
2. Start the search by pressing AUTO until AUTO STORING appears in the display.
When the search is completed, AUTO STORING will no longer be displayed. If there are no stations with
sufficient signal strength, NO AST FOUND is displayed.
The auto-stored stations can be selected using the preset buttons (2).\

l Press EXIT (6) to terminate the automatic storing function.
file:///K|/delme/2007_C70/07c70_10.htm (8 of 23)12/22/2006 9:15:56 PM

2007 Volvo C70
When the radio is in auto-store mode, AUTO is shown in the display. AUTO disappears when you return
to normal radio mode, which can be done by briefly pressing AM/FM (1), EXIT (6), or AUTO (7).
222 10 Audio
Radio functions
To return to the Auto-store mode, press the AUTO button briefly and select a stored station by pressing
one of the preset buttons (2).
Saving auto-stored stations in the preset memory
An auto-stored station can be saved in the memory for manually preset st\
ations.
1. Press AUTO (7) briefly.
2. Auto is displayed.
3. Press one of the preset buttons (2) under which the station is to b\
e stored. Hold down the button until
STATION STORED is displayed.
The radio will then exit auto-store mode and the stored station can be s\
elected by pressing the preset
button.
Scanning
SCAN (4) automatically searches through the selected waveband for strong A\
M or FM stations. When the
radio finds a station, that station will be played for approximately 8 s\
econds, after which scanning
resumes.
Activating/deactivating SCAN
1. Select radio mode using the AM/FM button (2).
2. Press SCAN to activate the function. SCAN is shown in the display.
3. Press the SCAN or EXIT button to deactivate the scan function and listen to the selected stati\
on.
Storing a station found with SCAN
A station can be stored as a preset while the SCAN function is activated\
.
l Press one of the preset buttons (2) under which the station is to be s\
tored. Hold down the button until
file:///K|/delme/2007_C70/07c70_10.htm (9 of 23)12/22/2006 9:15:56 PM