navigation system VOLVO S90 T8 2020 Sensus Navigation Manual

SENSUS NAVIGATION
Sensus Navigation is a satellite-based traffic information and navi- gation system. Volvo works continuously to improve our product. Modifications can mean that information, descriptions and illustrations in this supple-ment differ from the equipment in your vehicle. We reserve the rightto make changes without prior notice.

2
NAVIGATION
Activating and deactivating the navigation system* 4
Navigation system * symbols and
buttons 5
Information cards in the naviga-tion system * 6
Navigation system * in center display
6
Navigation system * in the instru-
ment panel 8
Activating and deactivating thenavigation system * in the instru-
ment panel 9
Navigation system * in head-up
display * 9
Voice control for navigation system *
9
Voice control command list for thenavigation system * 12
Entering a destination directly on the map 13
Entering a destination using anaddress 14
Entering a destination with a freetext search 15
Entering a POI as a destination 16
Entering a destination usingRecent/Favorites/Library 17
Entering a destination with Sendto Car 18
Itinerary 19

Viewing an itinerary19
Editing or clearing an itinerary 20
Viewing alternative routes 20
Viewing points of interest along the route 20
Show guidance in the itinerary 21
Traffic disruptions on map 21
Show traffic disruptions along theroute 22
Selecting a detour in the naviga- tion system * 22
Real Time Traffic Information (RTTI) 23
Activating and deactivating enhanced traffic information 24
Navigation system * settings
24
Map settings 25
Route settings and guidance 25
Traffic information settings 26
Map updating 27
Updating maps with a computerand USB flash drive 28
Updating maps from a vehiclewith Internet connection 31
Frequently Asked Questions regarding the navigation system *32
Navigation license agreements *
33
Navigation system * copyright
39
INDEX
Index 41
TABLE OF CONTENTS

NAVIGATION
* Option/accessory.
4
Activating and deactivating the navigation system *
The navigation system is automatically acti- vated when the driver's door is opened and isdeactivated when the driver locks and armsthe vehicle.
Activating navigation
Navigation system tile
Home button View the map on the center display by tapping the top tile (1) in Home view. If the center display does not show the navi- gation system tile, press the Home button (2)once briefly and then tap the navigation sys-tem tile (1). A map will appear of the surrounding area and the vehicle's current location (blue triangle).
Tap this symbol to display themap across the entire centerdisplay.
WARNING
Observe the following:
 Direct all your attention to the road and make sure that your concentration isfocused on driving.
 Follow applicable traffic laws and usegood judgment while driving.
 Road conditions can be affected byweather or season, which may makecertain recommendations less reliable.
Deactivating navigationWhile the ignition is switched on, the naviga-tion system is always active in the back- ground. It switches off automatically when theignition is switched off and the vehicle islocked.
NOTE
The navigation system is available even when the engine is turned off. If the batterycharge level becomes too low, the systemwill switch off.
Related information

Navigation system
* in center display
(p. 6)
 Navigation system
* in the instrument
panel (p. 8)
 Navigation system
* in head-up display
*
(p. 9)
 Voice control for navigation system
*
(p. 9)
 Navigation system
* symbols and buttons
(p. 5)

NAVIGATION
* Option/accessory.5
Navigation system * symbols and
buttons
The map in the center display displays sym- bols and colors that inform the driver of dif-ferent roads and the area around the vehicleand along the route. A tool bar with differentbuttons for different settings is shown on theleft.Symbols and buttons on the map
Estimated time of arrival/remaining time to arrival
Distance to destination
Compass/switches between north and vehicle's direction of travel up
Start
Destination
Switch map view from 2D to 3D
Reset map to follow the vehicle
Point of Interest (POI 1
)
Traffic information
Minimize (expanded view) or maximize the map (full screen)
The vehicle on the planned route
Minimize toolbar
Repeat most recent voice guidance
Minimize toolbar
Calculate a new route
Voice guidance temporarily On/Off
Display list of guidance points in the itiner- ary
Set a final destination/waypoint
Cancel guidance
Shows list of the itinerary's points of inter- est (POI 1
) and traffic information
Next maneuver
Itinerary and alternative route
Destination
Related information
 Information cards in the navigation sys- tem
* (p. 6)
 Traffic disruptions on map (p. 21)
 Real Time Traffic Information (RTTI) (p. 23)
 Show traffic disruptions along the route(p. 22)
1
Point of Interest

NAVIGATION
* Option/accessory.
6
Information cards in the navigation system *
All icons on the map, such as destinations, waypoints and stored favorites, have an infor-mation card that can be opened by tappingthe icon.
Press the information card once to display a small card, and press twice to display a largercard with more information. The informationand possible options vary depending on thetype of icon. For example, when a POI( 2
) is highlighted, the
driver can select e.g.: 
Start navigation - save the location as a
destination

Add as waypoint - the position is saved
as an intermediate destination (only dis- played at the specified destination)

Save - the position is saved in the library

Remove from itinerary - the position is
removed if it is included in the itinerary

Nearby POI - points of interest close to
the car's position are shown
Related information
 Itinerary (p. 19)
 Entering a POI as a destination (p. 16) 
Viewing points of interest along the route (p. 20)
Navigation system
* in center
display
The navigation system can be presented and controlled in several different ways, e.g. viathe center display.
All settings for the navigation system can be changed in the center display. The driver canselect how the map should be displayed orenter a destination here.
2 Point of Interest

||
NAVIGATION
* Option/accessory.
8
Change the headers displayedMaximize the map and tap the map heading at the top of the center display. The followingheaders can be displayed on the map: 1.
Destination Destination, arrival time (
ETA)
or remaining travel time (RTA) and dis-
tance to destination (Distance). For more information on selecting
ETA or RTA, see
"Route settings and guidance".
2. Current position as address (Address) or as coordinates (Coordinates). When coor- dinates are shown, altitude is also shown(Altitude). To choose between addressand coordinates, see section "Map set-tings".
Related information
Navigation system
* settings (p. 24)
 Navigation system
* in the instrument
panel (p. 8)
 Navigation system
* in head-up display *
(p. 9)
 Route settings and guidance (p. 25)
 Map settings (p. 25)
Navigation system
* in the
instrument panel
The navigation system can be presented and controlled in several different ways, e.g. viathe instrument panel.
The map is only shown on the 12" instrument panel.
While driving, the driver receives voice guid- ance and instructions on the instrument panel.Map guidance in the instrument panel canalso be activated without entering a destina-tion.
The right-side steering wheel keypad and instrument panel
Some of the navigation system's functions, such as Take me home and Cancel
guidance, can be controlled using the right-
side steering wheel keypad. If a message is displayed in the instrument panel, it must be accepted or dismissed before the menu canbe displayed.
Open/close the menu. The menu will close automatically after a period of inactivity orafter certain selections.
Scroll among the menus.
Scroll among selections in a menu.
Confirm or mark a selection.
Related information

Activating and deactivating the navigation system
* in the instrument panel (p. 9)
 Navigation system
* in center display (p. 6)
 Navigation system
* in head-up display *
(p. 9)

NAVIGATION
}}
* Option/accessory.9
Activating and deactivating the navigation system * in the
instrument panel
The navigation system will be automatically displayed in the instrument panel when adestination is set. The navigation system canalso be displayed without entering a destina-tion.
1. Pull down the center display's Top view. 2. Tap
Settings.
3. Tap
My CarDisplaysDriver Display
Information.
4. Tap the
Show Map radio button to dis-
play the navigation system in the instru- ment panel without entering a destination.
Related information
 Navigation system
* in the instrument
panel (p. 8)
Navigation system * in head-up
display *
The navigation system can be presented and controlled in several different ways, e.g. viathe head-up display.
Navigation system in windshield.
The driver can also get guidance and informa- tion from the navigation system in the head-updisplay on the lower section of the windshield. You can make settings to specify if the naviga- tion system should be shown in the head-updisplay, as well as the position of the informa-tion field.
Related information
 Navigation system
* in center display (p. 6)
 Navigation system
* in the instrument
panel (p. 8)
Voice control for navigation system *
If your vehicle is equipped with Sensus
Navigation, you can use voice commands tocontrol parts of your navigation system.
Start navigationHere is an introduction to how you can begin using voice commands to control the naviga-tion system in your vehicle.
To activate a navigation command–Press the steering wheel keypad's voice control button
.
> You can now give commands, e.g. "
Navigation", which will start a naviga-
tion dialog and show examples of com- mands.
Using voice control to get directions to an address
To get directions to a specific address, use the command Go to followed by the address. It is
important that the address is given in the right order. To use voice control for route guidanceto an address, the address must be said in thefollowing order: (1) street address, (2) housenumber, (3) city, as shown in the followingexample.

||
NAVIGATION
101.
Give the command
Go to.
> You can now say the address you would like route guidance to.
2. Say the street, e.g. Lombard Street"
3. Say the house number, e.g. "five"
4. Say the city, e.g. "San Francisco" >The full command will then be: "
Go toLombard Street 5, San Francisco". Pro- vided the address is found in the sys-tem, the navigation system will nowprovide route guidance to the address.
Using voice control for route guidance to an address in another country or anotherstate
Your navigation system uploads sets of maps for the country or state it believes your vehicleis located in. This means that for accurateroute guidance across country or state bor-ders, you need to first tell the system in whichcountry or state the address you would likeroute guidance to is located. You do this by using the command
Change country orChange state. (Command Change state is
primarily used in the US. In the example below, command
Change country is used.) 1.
Give the command
Change country.
> You can now input the country in which the address you would like route guid- ance to is located, e.g. "Canada".
2. Now input the address you want route guidance to by following the above proce-dure for "Using voice control for routeguidance to an address".
> In this scenario, the full command isdivided into two sub-commands: 1."
Change country, Canada"
2. "
Go to Hastings Street, Vancouver"
If the address is found in the system, the navigation system will now provideroute guidance to Hastings Street, Van-couver, Canada
NOTE
After you have changed country, try to pro- nounce the address you want route guid-ance to in the destination country's lan-guage. This is required because the systemautomatically switches to the recognitionlanguage of the selected country.
Using voice control for route guidance to an address set as Home
If you have set an address as a Home location
in your navigation system, you can use a voice command to receive route guidance to thelocation.
–Give the command Take me home.
> If the navigation system has a home location saved, you will now receive route guidance to the location.
Using voice control for route guidance to a place, store or other specificbusiness without inputting an exactaddress
Your navigation system can provide route guidance to specific places or types of busi-nesses, which are referred to in the system as "points of interest" (POI 3
). Examples of points
of interest are restaurants, hotels, gasoline stations, museums and tourist attractions. Use the command
Search to search for a
point of interest. You can search for a specific point of interest or for categories of points ofinterest.
3 Point Of Interest

NAVIGATION
}}
11
NOTE
It is important to use the right command for the option you would like route guid-ance for. When you want route guidance to a point of interest, use the
Search com-
mand. The command is different for route guidance to specific addresses. Then you should use the
Go to command instead.
Searching for a specific place or business
Here, [POI name] refers to a specific place or
business (a point of interest), e.g. a hotel, a restaurant, a city park, etc. 1. Give the command
Search.
> You can now say the specific point of interest you would like route guidance to.
2. Say
[POI name], e.g. "Golden Gate
Bridge"
> The full command will then be:
"
Search Golden Gate Bridge". If the
point of interest is found in the system, the navigation system will now provideroute guidance to the location.
Searching for a point of interest category, e.g. stores, hotels, restaurants, museumsor other tourist attractions or businesses.
Here, [POI category] refers to specific types
of places or businesses (points of interest), e.g. hotels, restaurants, museums, etc. 1. Give the command
Search.
> You can now say the type of point of interest you would like to find and receive route guidance to.
2. Say
[POI category], e.g. "restaurant"
> In this case, the full command will be: "
Search restaurant". The navigation
system will now search for restaurants around and in the vicinity of the vehicleand display a list of these in your instru-ment panel. The displayed list will pro-vide suggestions from the systembased on your command. Relevant cat-egories and nearby results will beshown at the top of the list, followed byother suggestions in order of relevance. Since we are looking for a category in this example, it may be a good idea toselect the category option that mostclosely matches your search. 3. Select the category from the list that best
matches what you searched for, in thiscase "restaurant(s)", by saying the rownumber shown in the instrument panel forthat option.
> You can now see your search resultsand select an option.
Using voice control to cancel route guidance
You can use voice commands to cancel route guidance, including all waypoints and the finaldestination.
–Give the command Clear itinerary.
> The navigation system will cancel route guidance and delete the final destina- tion and all waypoints along the route.
Inputing zip codes and house numbersNumber commands can be given in differentways depending on the function to be con-trolled:
 Zip codes
should be given by stating each
number individually, e.g. "zero three onetwo two four four three" (03122443).
 Addresses
can be given by stating each
number individually or in a group, e.g. twotwo or twenty-two (22). You can alsostate the numbers in hundreds, e.g. 19hundred 22 (1922). For English and Dutchlanguage settings, groups of numbers canalso be said in sequence, e.g. twenty-two

||
NAVIGATION
* Option/accessory.
12 twenty-two (22 22). For English, double or triple digits can also be used, e.g. dou-ble zero (00). Numbers in the range0-2300 can be used.
Related information

Voice control command list for the naviga- tion system
* (p. 12)
Voice control command list for the navigation system *
Several of the navigation system's functions can be activated with voice commands. Hereis a list of these.
Tap on the right-side steering wheel key-
pad and say one of the following commands:
 "
Navigation" - Starts a navigation dialog
and displays examples of commands.
 "
Take me home" - Guidance is provided
to the location set as Home.
 "
Go to [city]" - Inputs a city as a destina-
tion, e.g. "Go to San Francisco".
 "
Go to [address]" - Inputs an address as
a destination. An address must contain city and street. e.g. "Go to Filbert Street 5,San Francisco".
 "
Add intersection" - Starts a dialog to
input two streets. The destination will then be the intersection of these two streets.
 "
Go to [zip code]" - Input a zip code as
the destination. e.g. "Go to 1 2 3 4 5".
 "
Go to [contact]" - Input an address from
the phone book as the destination. Exam- ple "Go to Robyn Smith".
 "
Search [POI category]" - Search Points
of Interest (POI) in a certain category (e.g. restaurants)
4
. To sort the list along the
route, say "
Along the route" when the list
of results is displayed.
 "
Search [POI category] in [city]" -
Searches for POIs in a certain category and city. The list of results is sorted basedon the center point of the city. Example"Search restaurant in San Francisco".
 "
Search [POI name]". Example "Search
Zuni Café".
 "
Change country/Change state5,6
" -
Changes the search area for navigation.
 "
Show favorites" – Displays stored loca-
tions in the instrument panel.
 "
Clear itinerary" - Deletes all stored way-
points and destinations in an itinerary.
 "
Repeat voice guidance" - Repeats the
most recent guidance instruction.
 "
Turn off voice guidance" - Guidance off.
 "
Turn on voice guidance" - Guidance on.
4
The user can choose to call the POI or enter it as a destination.
5 For European countries, "country" is used instead of "state".
6 For Brazil and India, search area is changed in the center display.