display VOLVO V90 2017 Owners Manual

MAINTENANCE AND SERVICE
527
Wiper blades in service position The windscreen wiper blades must be in service position when, for example, they are to bereplaced.
Wiper blades in service position.
In order to change, clean or lift the wiper blades (e.g. for scraping off ice from the windscreen)they must be in service position.
IMPORTANT
Before placing the wiper blades in the service position, make sure that they are not frozendown.
Activating service positionService mode cannot be activated when the car is stationary and the windscreen wipers are noton. Service mode can be activated in two ways viathe centre display:
Via function view
Press the Wiper Service
Position button. The light indi-
cator in the button illuminates when the service position isactivated. Upon activation, thewipers move to standingstraight up.
Via settings
1. Press Settings in the top view.
2. Press
My CarWipers.
3. Select
Wiper Service Position.
> The wipers move up to standing straight up.
Deactivating service positionService mode can be deactivated in two ways via the centre display:
Via function view
Press the Wiper Service
Position button in the centre
display. The light indicator in the button extinguishes whenthe service position is deacti-vated.
Via settings
1. Press Settings in the top view in the centre
display.
2. Press
My CarWipers.
3. Deselect
Wiper Service Position to deacti-
vate service position.
The wiper blades also exit service position if:
• Windscreen wiping is activated.
• Windscreen washing is activated.
• Rain sensor activated.
• The car is driven away.
IMPORTANT
If the wiper arms in service position have been folded up from the windscreen, theymust be folded back down onto the wind-screen before the activation of wiping, wash-ing or the rain sensor, as well as before driv-ing. This is to avoid scraping the paint on thebonnet.
Related information
• Replacing a wiper blade (p. 528)
• Filling washer fluid (p. 529)
• Overview of the centre display (p. 33)
• Windscreen and headlamp washers (p. 150)

MAINTENANCE AND SERVICE
}}
529
Replacing the wiper blade, rear window
1. Fold out the wiper arm.
2. Grip the inner section of the blade (by thearrow).
3. Turn anticlockwise to use the blade's end position against the wiper arm as a lever to detach the blade more easily.
4. Press the new wiper blade into place. You should hear a click. Check that it is firmlyinstalled.
5. Lower the wiper arm.
IMPORTANT
Check the blades regularly. Neglected main- tenance shortens the service life of the wiperblades.
Related information
• Wiper blades in service position (p. 527)
• Cleaning the exterior (p. 549)
Filling washer fluid
Washer fluid is used for cleaning the headlamps as well as the windscreen and rear window.Washer fluid with antifreeze must be used whenthe temperature is under the freezing point.
Filling of washer fluid takes place in the reservoir with a blue cap.
NOTE
When approx. 1 litre of washer fluid remains in the reservoir the message Washer fluid
Level low, refill is shown in the driver display
together with the symbol
.
Prescribed grade: Washer fluid recommended
by Volvo - with frost protection during cold weather and below freezing point.

MAINTENANCE AND SERVICE
}}
531
Positive charging point
Negative charging point
IMPORTANT
When charging the starter battery and the support battery, only use a modern batterycharger with controlled charging voltage. Fastcharging function must not be used since itmay damage the battery.
IMPORTANT
If the following instruction is not observed then the energy saving function for infotain-ment may be temporarily disengaged, and/orthe message in the driver display about thestarter battery's state of charge may be tem-porarily inapplicable, following the connectionof an external starter battery or batterycharger:
• The negative battery terminal on the car's starter battery must
never be used for
connecting an external starter battery orbattery charger - only the car's negative
charging point may be used as the
grounding point.
NOTE
The life of the battery is shortened if it becomes discharged repeatedly. The life of the battery is affected by several factors, including driving conditions and cli-mate. Battery starting capacity decreasesgradually with time and therefore needs to berecharged if the car is not used for a longertime or when it is only driven short distances.Extreme cold further limits starting capacity. To maintain the battery in good condition, at least 15 minutes of driving/week is recom-mended or that the battery is connected to abattery charger with automatic trickle charg-ing. A battery that is kept fully charged has a maximum service life.

MAINTENANCE AND SERVICE
542
Fuses under glovebox
Fuses under the glovebox protect, amongst other things, the 230 V socket, displays anddoor modules.

||
MAINTENANCE AND SERVICE
* Option/accessory.
544
Positions
• Fuses 1, 3-21, 23-36, 39-53 and 55-59 are of the "Micro" type.
• Fuses 2, 22, 37-38 and 54 are of the"MCase" type and should be replaced by a workshop 18
.
Function AA
- -
230 V socket in tunnel console, by legroom for rear seat
*30
- -
Movement detector
* 5
Media player 5
Driver display 5
Keypad in centre console 5
Sun sensor 5
- -
- -
Steering wheel module 5
Function
AA
Module for start knob and for park- ing brake control 5
Steering wheel module for heated steering wheel
* 15
- -
- -
- -
- -
Control module for climate control system
10
Steering lock 7.5
Diagnostic socket OBDII 10
Centre display 5
Fan module for climate control sys- tem, front40
- -
Function
AA
Controls lighting; Interior lighting; Dimming of interior rearview mir- ror
*; Rain and light sensor *; Keypad
in tunnel console, by legroom forrear seat *; Power front seats *; Con-
trol panels in rear doors 7.5
Control module for driver support functions
5
Panorama roof with sun blind
*20
Head-up display
* 5
Passenger compartment lighting 5
- -
Display in roof console (Seatbelt reminder/Indicator for airbag onthe front passenger seat) 5
- -
Humidity sensor 5
Door module in right-hand rear door
20
Fuses in cargo area 10
18
An authorised Volvo workshop is recommended.

MAINTENANCE AND SERVICE
}}
549
Cleaning the exterior
The car should be washed as soon as it becomes dirty. This means that the car is easierto clean since the dirt does not attach as firmly.It also reduces the risk of scratches and keepsthe car fresh. Wash the car in a car wash with oilseparator. Use car shampoo.
Handwashing
• Remove bird droppings from the paintwork as soon as possible. Bird droppings containchemicals that affect and discolour paintworkvery quickly. For example, use soft paper orsponge soaked in plenty of water. An author-ised Volvo workshop is recommended for theremoval of any discoloration.
• Hose down the underbody.
• Rinse the entire car until the dissolved dirthas been removed so as to reduce the risk ofscratches from washing. Do not spray directlyonto the locks.
• If necessary, use cold degreasing agent onvery dirty surfaces. Note that in this case, thesurfaces must not be hot from the sun.
• Wash using a sponge, car shampoo andplenty of lukewarm water.
• Clean the wiper blades with a lukewarm soapsolution or car shampoo.
• Dry the car using a clean, soft chamois or awater scraper. If you avoid allowing drops ofwater to dry in strong sunlight, you reduce the risk of water drying stains which mayneed to be polished out.
WARNING
Always have the engine cleaned by a work- shop. There is a risk of fire if the engine is hot.
IMPORTANT
Dirty headlamps have impaired functionality. Clean them regularly, e.g. when refuelling. Do not use any corrosive cleaning agents but use water and a non-scratching spongeinstead.
NOTE
Outside lighting such as headlamps and rear lamps may temporarily have condensation onthe inside of the lens. This is normal, all exte-rior lighting is designed to withstand this.Condensation is normally vented out of thelamp housing when the lamp has beenswitched on for a time.
Automatic car washAn automatic car wash is a simple and quick way of washing the car, but it cannot reach every-where. Washing the car by hand is recommendedto achieve a good result, or to supplement auto-matic car washes with washing by hand.
NOTE
The car must only be washed by hand over the first few months. This is because the paintis more delicate when it is new.
IMPORTANT
Before driving the car into an automatic car wash, deactivate the functions for Automaticbraking when stationary (Auto Hold) andAutomatic application of parking brake. Ifthese functions are not deactivated, the brakesystem will jam when the car is stationary andthe car will not be able to move.
In car washes where the car is towed through with rolling wheels, the following applies:
1. Drive into the automatic car wash.
2. Deactivate the function for automatic braking
when stationary (Auto Hold) using the switch in the tunnel console.
3. Deactivate the function for automatic appli- cation of parking brake via the centre display.
4. Move the gear lever to position N.

MAINTENANCE AND SERVICE
}}
553
Interior plastic, metal and wood partsA fibrillated fibre or microfibre cloth, lightly mois- tened with water, available from Volvo dealers, isrecommended for cleaning interior parts and sur-faces. Do not scrape or rub stains. Never use strong stain removers.
SeatbeltsUse water and a synthetic detergent. A specialtextile cleaning agent is available from Volvodealers. Ensure that the seatbelt is dry beforeallowing it to retract.
Inlay mats and floor matRemove inlaid carpets for separate cleaning ofthe floor carpet and the inlaid carpets. Use a vac-uum cleaner to remove dust and dirt. Each inlaymat is secured with pins. Remove the inlay mat by taking hold of the inlay mat at each pin and lifting the mat straight up. Fit the inlay mat in place by pressing it in at each pin.
WARNING
Only use one inlaid mat at each seat, and check before setting off that the mat by thedriver's seat is firmly affixed and secured inthe pins so that it does not get caught adja-cent to and under the pedals.A special textile cleaner is recommended for stains on the floor mat after vacuuming. Floormats should be cleaned with agents recom-mended by Volvo dealers.
Related information
•
Cleaning the centre display (p. 553)
Cleaning the centre display
Dirt, stains and grease from fingers can affect the centre display's performance and readability.Clean the screen frequently with a microfibrecloth.
Home button for the centre display.
1. Turn off the centre display with a long press on the home button.
2. Wipe the screen with the microfibre cloth supplied or use another microfibre cloth of equivalent quality. The screen should bewiped with a clean and dry microfibre clothwith small circular movements. If necessary,lightly moisten the microfibre cloth with cleanwater.
3. Activate the display with a short press on the home button.

||
MAINTENANCE AND SERVICE
554
IMPORTANT
The microfibre cloth used to clean the centre display must be free from sand and dirt.
IMPORTANT
When cleaning the centre display, only use gentle pressure on the screen. Heavy pres-sure can damage the screen.
IMPORTANT
Do not spray any liquid or caustic chemicals directly on the centre display. Do not use win-dow cleaning agent, other cleaning agents,aerosol spray, solvents, alcohol, ammonia orcleaning agent containing abrasive. Never use abrasive cloths, paper towels or tis- sue paper, these can scratch the centre dis-play.
Related information
•Cleaning the interior (p. 552)
• Overview of the centre display (p. 33)
Paint damage
Paint is an important part of the car's rustproof- ing and should therefore be checked regularly.The most common types of paintwork damageare stone chips, scratches, and marks on theedges of wings, doors and bumpers.
Colour codeThe colour code label is located on the car's door pillar and becomes visible when the right-handrear door is opened.
Exterior colour code
Any secondary exterior colour code
It is important that the correct colour is used.
Touching up minor paintwork damageTo avoid the onset of rust, damaged paintwork should be rectified immediately.
Materials that may be needed
• Primer 20
- a special adhesive primer in a
spray can is available for e.g. plastic-coated bumpers.
• Basecoat and clearcoat - available in spray cans or as touch-up pens/sticks 21
.
• Masking tape.
• fine sand paper 20
.
Related information
• Repairing paint damage (p. 555)
• Type designations (p. 558)
• Rustproofing (p. 552)
20
If required.
21 Follow the instructions that are included with the package for the touch-up pen/stick.

ALPHABETICAL INDEX
578Automatic car washes 549 Automatic engine stop
auto-stop 396
Automatic gearbox 390 trailer 428
Automatic relocking 242
Automatic speed limiter 281AUX jack for connecting media 448
Auxiliary heater 215
AWD, All Wheel Drive 405
B
Backrest front seat, adjusting 121, 122, 124
rear seat, lowering 130
Bag holder 228
Battery 388, 530 jump starting 388
maintenance 530
overload 415
start 530
support 533
symbols on the battery 533
warning symbols 533
Bi-Fuel introduction 54
BLIS 340, 342, 343 Bluetooth connect 447
connect car to Internet 464
phone 456
settings 463
Bonnet, opening 514
Book service and repair 506Brake assist after collision 408
Brake fluid grade 570
Brake functions 406
Brake light 143
Brakes 406 Anti-lock braking system, ABS 406
automatic when stationary 412
brake assist system, BAS 408
brake light 143
brake system 406
emergency brake lights 408
handbrake 409, 410, 411
bulbs, specifications 526C
Camera sensor 337
Car care 549 Leather upholstery 552
Car functions in centre display 47
Cargo area 226 electrical socket 220
lighting 146
mounting points 228
protective net 232
Cargo cover 230
Cargo grille 233
Car holiday 415
Car key battery low 257Car modem connect car to Internet 464
settings 468
Car status 506 Tyre pressure 487
Car upholstery 552
Car washing 549Catalytic converter Recovery 432
CD player 446
central locking 245

ALPHABETICAL INDEX
579
Centre display
change settings 45
cleaning 553
climate control 187
messages 106
operation 36, 40
overview 33
symbols in status bar 45
Checking the engine oil level 517
Child safety 71
Child safety locks 261
Child seat 71 integrated booster cushion 82
i-Size/ISOFIX mounting points 77
lower mounting points 74
positioning/fitting 71
table for location 75
table of i-Size 81
table of ISOFIX 78
Upper mounting points 73
Cigarette lighter 224 City Safety ™330, 332, 333, 335, 336,
337, 339
Cleaning automatic car wash 549
car washing 549
centre display 553
Fabric upholstery 552
rims 551
seatbelts 553
upholstery 552
Clean Zone Interior Package 185
Climate control 182, 186 auto-regulation 189
centre display 187
experienced temperature 183
fan control 193
Parking 206
rear seat 188
sensors 183
temperature control 190
voice control 119
zones 182
Clock, adjustment 99 CO 2 emissions 572
Collision 56, 59, 63, 69
Collision warning 330Collision warning system Pedestrian detection 333
Radar sensor 318
Colour code, paint 554
Combined instrument panel 90 settings 94
Compass 156 calibration 157
Condensation in headlamps 549Controls lighting 135
Coolant 570
Coolant, filling 518Cooling system overheating 414
Cornering lights 142
Corner Traction Control 273Cover cargo area 230
Crash, see Collision 56
Cruise control 284 deactivate 287
managing speed 284, 285
temporary deactivation 286
CTA 343, 344, 345
Cyclist detection 333
CZIP (Clean Zone Interior Package) 185
D
DAB Radio 440 Data recording 22
transfer between car and workshop 511
Data link connector 23
Daytime running lights 137