set clock VOLVO XC70 2006 Owner´s Manual

27
Instrument panel
1 Turn signals
2 Text window
3 Temperature gauge
The pointer should be approximately midway
on the gauge when driving.
Do not drive the car if the warning light is
on. The text window will provide you with
additional information.
If the engine temperature remains high, check
coolant level - see page 154.
4 Trip odometer/reset button
The trip odometer is used for measuring
shorter distances. The last digit indicates 1/10
mile/kilometer. Press the button quickly to
toggle between trip odometers 1 and 2. Hold in
the button for more than 2 seconds to reset.
5 Odometer
6 Speedometer
7 General warning light (see page 28).
23800662d346
5119
8
7 101312
1
14
Please note that this symbol does not
indicate a fault with your car.
At low speeds or when the car is not moving,
the temperature readings may be slightly
higher than the actual ambient temperature.
12 Clock/reset button
Turn the button to adjust the clock.
13 Fuel gauge

\b
\f
 \f \b
\f
\b

\f
\b\f\f
 !
" #$%\b&
'\b\f\f
 !" #(\b&
When the warning light comes on there are
approximately 2.1 US gal. (8 liters) of fuel
remaining.
14 Indicator and warning lights
8 High beam indicator light
9 Tachometer
Indicates engine speed in thousands of rpm.
Do not drive for long with the needle in the red
section. The engine has an built-in function
preventing too high engine speed. When this
function operates, you may discern some
pulsation, which is normal.
10 Gear and driving mode indicator
The currently selected driving mode is
displayed here. If you use the Geartronic
function on the automatic transmission, the
currently selected gear will be displayed.
11 Ambient temperature indicator
This display indicates the air temperature
outside your car. A "snowflake" symbol in the
text window is displayed when the temperature
is in the range of 23 - 36° F (-5 - +2° C).

52
Electronic Climate Control (ECC) - manual settings
8702781d
Press AUTO to automatically regulate air flow or press any combina-
tion of the controls shown in the illustration to manually adjust air flow.
An LED in the switch will light up if an air flow control has been
pressed.
Air conditioning ON/OFF
Press the switch to turn the air conditioning on or
off. The “ON” or “OFF” LED will light up to
indicate if the system is switched on or off. Other
functions will still be regulated automatically (if the
AUTO switch is on).
•
 

 
-*O@
,2O51

•4-!
   









 

 
 
 

Blower control
Turn the control clockwise to increase or counterclock-
wise to decrease the blower speed. Pressing the AUTO
switch will automatically regulate blower speed and
override manual adjustment.
NOTE: Turning the blower control counterclockwise as far as possible
(an orange LED next to the control will light up) will turn both the
blower and the air conditioning off.
Recirculation (see also page 55)
9   


,




   
 

1
GH' 


 


•=   
 

8
 
 

$


•"
  
%F
 !"


#
!

$$%


!



!!&
•) ' 


   
 

•


&
,5
 (P
  

19 




-  





GH'


F  

 





  
  




F %* 
 



 


•


&
9 


- 

GH'



F   
:
;

•

  

  





  



•



 
 

  


Heated front seats (option)
Please see page 40 for more information on this
function.Air flow
Air flow to windows
Air from panel vents
Air through floor vents
8702776d
8702777d
8702784d
8702778d