torque VOLVO XC70 2006 Owner´s Manual

104
8901671d
Load carriers (models with rails)
Load carrier cover
The car's ignition key or the stud on the edge
of the supplied torque wrench can be used to
undo or tighten the cover. Turn a quarter turn
(90 degrees). See illustration.
Fitting the load carriers
(accessory)
Make sure that the load carrier is pressed
firmly out against the roof rail. Screw the load
carrier in place. Use the supplied torque
wrench and tighten to the mark on the wrench
(corresponding to 6 Nm). See illustration.
Position of load carriers
Make sure that the wing-shaped load carriers
are installed on the roof rails with the rounded
edge forward (see the inset illustration above).
The load carriers are identical and can be
placed anywhere along the roof rails.
Reducing wind noise and
improving fuel economy
 
8A  
 A
 6 



  

8901878m
8901672m