seats VOLVO XC90 2014 Owner´s Manual

01 Safety
Convertible seats 01
46
WARNING
•Convertible child seats should be instal- led in the rear seat only.
• A rear-facing convertible seat shouldnot be positioned behind the driver'sseat unless there is adequate space forsafe installation.
1. Place the convertible seat in the rear seat
of the vehicle.
2. Attach the seat belt to the convertible seat according to the manufacturer's instructions.
3. Fasten the seat belt by inserting the latch plate into the buckle (lock) until a distinctclick is audible.
4. Pull the shoulder section of the seat belt out as far as possible to activate thebelt's automatic locking function.
G026501
Pull out the shoulder section of the seat belt
NOTE
The locking retractor will automatically release when the seat belt is unbuckledand allowed to retract fully.
5. Press the convertible seat firmly in place,let the seat belt retract and pull it taut. A sound from the seat belt retractor's auto-matic locking function will be audible atthis time and is normal. The seat beltshould now be locked in place.
6. Push and pull the convertible seat along the seat belt path to ensure that it is heldsecurely in place by the seat belt.
Ensure that the seat is securely in place
WARNING
It should not be possible to move the child restraint (child seat) more than 1 in.(2.5 cm) in any direction along the seat beltpath.
The convertible seat can be removed by unbuckling the seat belt and letting it retractcompletely.

01 Safety
Convertible seats01
47
WARNING
A child seat should never be used in the front passenger seat of any vehicle with afront passenger airbag – not even if thePASSENGER AIRBAG OFF symbol near
the rear-view mirror is illuminated (on vehi-cles equipped with Occupant Weight Sen-sor). If the severity of an accident were tocause the airbag to inflate, this could leadto serious injury or death to a child seatedin this position.

01 Safety
Booster cushions 01
48
Securing a booster cushion
G026513
Position the child correctly on the booster cush- ion
Booster cushions are recommended for chil- dren who have outgrown convertible seats.
1. Place the booster cushion in the rear seat of the vehicle.
2. With the child properly seated on the booster cushion, attach the seat belt to or around the cushion according to themanufacturer's instructions.
3. Fasten the seat belt by inserting the latch plate into the buckle (lock) until a distinctclick is audible.
G026517
Positioning the seat belt
4. Ensure that the seat belt is pulled taut and fits snugly around the child.
WARNING
•The hip section of the three-point seat belt must fit snugly across the child'ships, not across the stomach.
• The shoulder section of the three-pointseat belt should be positioned acrossthe chest and shoulder.
• The shoulder belt must never beplaced behind the child's back orunder the arm.

01 Safety
ISOFIX/LATCH lower anchors01
49
Using the ISOFIX/LATCH lower child seat anchors
G015268
ISOFIX/LATCH lower child restraint anchorsLower anchors for ISOFIX/LATCH-equipped child seats are located in the second row,outboard seats, hidden below the backrestcushions. Symbols on the seat back uphols-tery mark the anchor positions (see the illus-tration).
To access the anchors:1. Put the child restraint in position.
2. Kneel on the child restraint to press down the seat cushion and locate the anchors by feel. 3. Fasten the attachment on the child
restraint's lower straps to the ISOFIX/LATCH lower anchors.
4. Firmly tension the lower child seat straps according to the manufacturer's instruc-tions.
WARNING
Volvo's ISOFIX/LATCH anchors conform to FMVSS/CMVSS standards. Always refer tothe child restraint system's manual forweight and size ratings.
WARNING
The ISOFIX/LATCH lower child restraint anchors are only intended for use withchild seats positioned in the outboardseating positions. These anchors are notcertified for use with any child restraintthat is positioned in the center seatingposition. When securing a child restraint inthe center seating position, use only thevehicle's center seat belt.
NOTE
•The rear seat's center position is not equipped with ISOFIX/LATCH loweranchors. When installing a childrestraint in this position, attach therestraint's top tether strap (if it is soequipped) to the top tether anchoragepoint and secure the restraint with thevehicle's center seat belt.
• Always follow your child seat manufac-turer's installation instructions, anduse both ISOFIX/LATCH lower anchorsand top tethers whenever possible.
G031682
Fasten the attachment correctly to the ISOFIX/ LATCH lower anchors

01 Safety
Top tether anchors01
51
Top tether anchors
G027032
Top tether anchorage points
Your vehicle is equipped with child restraint top tether anchorages in all second row seatpositions (second-row seats only in 7-seatmodels).
Using the top tether anchorages
• Place the child restraint on the rear seat.
• Route the top tether strap under the head restraint and fasten its attachment to theanchorage.
WARNING
Be sure to fasten the child tether attach- ment correctly to the anchor. If it is notcorrectly fastened, the child seat may notbe properly restrained in the event of acollision.
•Firmly tension the top tether strap according to the child restraint manufac-turer's instructions. Tension the top tetherstrap only after the lower anchor straps orthe seat belt have been firmly tensioned.
For securing the child restraint to ISOFIX/ LATCH lower anchors,see page 49.
WARNING
• Always refer to the recommendations made by the child restraint manufac-turer.
• Volvo recommends that the top tetheranchors be used when installing a for-ward-facing child restraint.
• Never route a top tether strap over thetop or around the head restraint. Itshould always be routed under thehead restraint.
• Child restraint anchorages aredesigned to withstand only thoseloads imposed by correctly fitted childrestraints. Under no circumstances arethey to be used for adult seat belts orharnesses. The anchorages are notable to withstand excessive forces onthem in the event of collision if full har-ness seat belts or adult seat belts areinstalled to them. An adult who uses abelt anchored in a child restraintanchorage runs a great risk of suffer-ing severe injuries should a collisionoccur.
• Do not install rear speakers thatrequire the removal of the top tetheranchors or interfere with the properuse of the top tether strap.

03 Climate
Air distribution
03
* Option/accessory, for more information, see Introduction.97
Ventilated front seats*
G030244
Controls for ventilated front seats
The ventilation system consists of fans in the seats and backrests that draw air through theseat upholstery. The cooling effect increasesas the air in the passenger compartmentbecomes cooler. The level of ventilation is adjusted on the con- trol panel on the side of the seat. The fanscan be set to three speeds. To start seat ventilation:
–Press briefly on .
To gradually increase ventilation:
–Press briefly on . For maximum ventilation:
–Hold down for approximately 2 sec-
onds.
To gradually decrease ventilation:
–Press briefly on .
To switch off ventilation:
–Hold down for approximately 2 sec-
onds.
The ventilation can be used at the same time as seat heating*, for example, to help drydamp clothing.
NOTE
• Seat ventilation cannot be started if the temperature in the passenger com-partment is below 41°F (5°C).
• Seat ventilation should be used withcaution by people who are sensitive todrafts. A moderate ventilation levelshould be set if the function is used forextended periods.

03 Climate
Electronic climate control (ECC)
03
98* Option/accessory, for more information, see Introduction.
Overview
AC – (ON /OFF )
Recirculation/Multifilter with sensor*
Recirculation
AUTO
Air distribution
Passenger compartment temperature sensor
Defroster windshield and side windows
Rear window and door mirrors defroster
Heated front seats*
Temperature passenger´s side
Temperature driver´s side
Blower
Blower control for rear climate system*
Functions
A/C – ON/OFF
•The air conditioning functions only at temperatures above 32°F (0°C).
• While the Defroster function is selected,the air conditioning is temporarily acti-vated to dehumidify the air, even if youhave manually switched the air condition- ing off. This will only function if the bloweris not switched off.
Press the switch to turn the air conditioning on or off. The " ON" or " OFF" LED will light up
to indicate if the system is switched on or off.Other functions will still be regulated auto-matically (if the AUTO switch is on).
Interior air quality sensor*
Some vehicles are equipped with a multifilter and air quality sensor. The filter separatesgases and particles, thereby reducing theamounts of odors and contaminants enteringthe vehicle. The air quality sensor detectsincreased levels of contaminants in the out-side air. When the air quality sensor detects

03 Climate
Electronic climate control (ECC)
03
100* Option/accessory, for more information, see Introduction.
switch will light up to indicate that the defrost function is engaged.
• Blower speed increases automatically and the air conditioning will switch on (ifnot already on and if the passenger com-partment blower is not turned off) todehumidify the air in the passenger com-partment.
• Recirculation will not function whiledefrost is engaged.
The climate system will return to its previous settings when the defroster function isswitched off.
Rear window and door mirror
defrosters
This function defrosts/deices the rear window and door mirrors. The LED in the switch willlight up to indicate that the heating function isengaged. For additional information on thisfunction see page 75. Never use ice scrapers made of metal as they can easily scratch the mirror surface.
Heated front seats*
1. Press the switch once for maximum seat heating. Both LEDs in the switch will be lit. 2. Press the switch a second time for com-
fort heating. One LED in the switch will belit.
3. Press the switch a third time to turn the heating off completely. The LED will gooff.
The seat heating for the passenger seatshould be switched off when the seat is notoccupied.
Heated rear seats (XC90 Executive*)
G030976
Button for rear seat heating Heating for the respective outboard rear seats can be switched on or off with buttons on either side of the center console (see theillustration). To switch on rear seat heating:
–Press the button.
> The symbol in the button will illumi-
nate.
To switch off rear seat heating:
–Press the button.
> The symbol in the button will go out.
Temperature
These controls are used to individually set the temperature for both sides of the passengercompartment. Please note that the compart-ment will not be heated or cooled faster bysetting the temperature higher or lower thannecessary. Set the control to the temperature you prefer.
Blower control 1
Turn the control clockwise to increase or counterclockwise to decrease the blowerspeed. Pressing the
AUTO switch will auto-
matically regulate blower speed and overridemanual adjustment. Turning the blower control counterclockwise until an orange LED comes on will turn boththe blower and the air conditioning off.
1 See also see page 94.

102
Front seats............................................................................................ 104 Rear seats............................................................................................. 108Interior lighting...................................................................................... 111
Storage compartments......................................................................... 114
Securing cargo......................................................................................119

04 Interior
Front seats
04
104* Option/accessory, for more information, see Introduction.
Manually adjusted front seats
G027214
Front-rear adjustment: lift the bar and move the seat to the position of yourchoice.
Raise/lower the front edge of the seat cushion*: use the control to pump thefront edge of the cushion up or down.
Raise/lower seat height: pump the seat up or down.
Lumbar support: turn the control for firmer or softer lumbar support.
Backrest tilt: turn the control to adjust the angle of the backrest.
Control panel for optional power seat (see page 105 for more information).
WARNING
• Do not adjust the seat while driving. The seat should be adjusted so thatthe brake pedal can be depressedfully. In addition, position the seat asfar rearward as comfort and controlallow.
• Check that the seat is securely lockedinto position after adjusting.
Folding the backrests in the front seat*
G014805
The front passenger seat backrest can be folded to a horizontal position to make roomfor a long load. Fold the backrest as follows: 1. Move the seat as far back as possible.
2. Adjust the backrest to the upright posi-
tion.
3. Lift the catches on the rear of the back- rest.
4. Without releasing the catches, push the backrest forward.
5. Move the seat as far forward as possible so that the head restraint slides under the glove compartment.
WARNING
•When transporting long objects, cover sharp edges on the load to help pre-vent injury to occupants. Secure theload to help prevent shifting duringsudden stops.
• When the seat's backrest is returnedto the upright position, push and pull itto be sure that it is securely locked inthis position.