light YAMAHA BANSHEE 350 2002 Manuale de Empleo (in Spanish)

8-111
EBU00861Tail/brake light bulb replacement
1. Remove the bulb holder (together with the
bulb) by turning it counterclockwise.
2. Remove the defective bulb from the bulb
holder by pushing it inward and turning it
counterclockwise.
3. Install a new bulb in the bulb holder by
pushing it inward and turning it clockwise.
4. Install the bulb holder (together with the
bulb).
qq
w
1. Bulb holder1. Fixation d’ampoule1. Portabombillas
1. Bulb holder 2. Bulb1. Fixation d’ampoule 2. Ampoule1. Portabombillas 2. Bombilla
5FK-9-63-8 2/7/02 1:28 PM Page 112

8-115
wDo not smoke when checking the fuel sys-
tem. Fuel can ignite or explode, causing
severe injury or property damage. Make sure
there are no open flames or sparks in the
area, including pilot lights from water
heaters or furnaces.
5FK-9-63-8 2/7/02 1:28 PM Page 116

9-9
5. Block up the frame to raise all wheels off
the ground.
6. Tie a plastic bag over the exhaust pipe out-
let to prevent moisture from entering.
7. If storing in a humid or salt-air atmosphere,
coat all exposed metal surfaces with a light
film of oil. Do not apply oil to any rubber
parts or the seat cover.NOTE:
Make any necessary repairs before storing the
machine.
5FK-9-63-9~11 2/7/02 1:29 PM Page 10

10-5
Model YFZ350
Suspension:
Front suspension Double wishbone
Rear suspension Swingarm (link suspension)
Shock absorber:
Front shock absorber Coil spring/Oil damperRear shock absorber Coil spring/Gas-oil damper
Wheel travel:
Front wheel travel 230 mmRear wheel travel 220 mm
Electrical:
Ignition system C.D.I.Generator system C.D.I. magnetoHeadlight type: Krypton bulb
Bulb voltage, wattage ×quantity:
Headlight 12V, 30 W/30 W ×2
Tail/brake light 12V, 5 W/21 W ×1
5FK-9-63-9~11 2/7/02 1:29 PM Page 16