headlight bulb YAMAHA BRUIN 250 2006 Notices Demploi (in French)

Wheel removal ................................... 8-81
Wheel installation ............................... 8-83
Battery ............................................... 8-85
Replenishing the battery fluid ............. 8-89
Fuse replacement .............................. 8-93
Replacing a headlight bulb ................. 8-95
Headlight beam adjustment.............. 8-101
Tail/brake light bulb replacement ..... 8-101
Troubleshooting ............................... 8-105
Troubleshooting chart ...................... 8-107
CLEANING AND STORAGE ................... 9-1
A. Cleaning .......................................... 9-1
B. Storage ........................................... 9-7
SPECIFICATIONS ................................ 10-1
CONVERSION TABLE .......................... 11-1
91011EE.book Page 3 Friday, May 27, 2005 5:00 PM

8-95 1. Headlight bulb holder cover
1. Cache de la fixation de l’ampoule de phare
1. Cubierta del portabombillas de la bombilla del faro
1. Headlight coupler
1. Coupleur de phare
1. Acoplador del faro
EBU15941
Replacing a headlight bulb
If a headlight bulb burns out, replace it as follows.
1. Remove the bulb holder cover at the rear of
the headlight by pulling it off.
2. Disconnect the headlight coupler by lifting the
tab as shown and pulling out the coupler.
EE.book Page 95 Friday, May 27, 2005 5:00 PM

8-97 1. Headlight bulb holder assembly
1. Ensemble fixation d’ampoule de phare
1. Conjunto del portabombillas del faro
1. Do not touch the glass part of the bulb.
1. Ne pas toucher le verre de l’ampoule.
1. No tocar la parte de cristal de la bombilla.
3. Remove the headlight bulb holder assembly
by turning it counterclockwise.NOTE:_ The headlight bulb cannot be removed from the
headlight bulb holder. To replace the headlight
bulb, replace the headlight bulb holder assembly. _
WARNING
_ A headlight bulb is hot when it is on and imme-
diately after it is turned off. Wait for the bulb to
cool before touching or removing it. You can
be burned or a fire could start if the bulb touch-
es something flammable. _4. Install a new headlight bulb holder assembly
by inserting it and turning it clockwise.CAUTION:_ Do not touch the glass part of the headlight
bulb to keep it free from oil, otherwise the
transparency of the glass, the luminosity of the
bulb, and the bulb life will be adversely affect-
ed. Thoroughly clean off any dirt and finger-
prints on the headlight bulb using a cloth
moistened with alcohol or thinner. _
EE.book Page 97 Friday, May 27, 2005 5:00 PM

8-99
5. Connect the headlight coupler.
6. Install the headlight bulb holder cover at the
rear of the headlight.
EE.book Page 99 Friday, May 27, 2005 5:00 PM

8-101 1. Adjusting screw
1. Vis de réglage
1. Tornillo de ajuste
1. Bulb holder
1. Fixation d’ampoule
1. Portabombilla
EBU01089
Headlight beam adjustmentCAUTION:
It is advisable to have a Yamaha dealer make
this adjustment. To raise the beam, turn the adjusting screw in
direction
a.
To lower the beam, turn the adjusting screw in
direction
b.
EBU08610
Tail/brake light bulb replacement
1. Remove the bulb holder (together with the
bulb) by turning it counterclockwise.
EE.book Page 101 Friday, May 27, 2005 5:00 PM

10-5
Brake:
Front brake type Dual disk brake
Operation Right hand operation
Rear brake type Drum brake
Operation Left hand and right foot operation
Suspension:
Fr on t S tr ut
Rear Swingarm (monocross)
Shock absorber:
Front Coil spring / oil damper
Rear Coil spring / oil damper
Wheel travel:
Front 125.0 mm
Rear 135.0 mm
Electrical:
Ignition system DC CDI
Generator system AC magneto
Battery type / voltage, capacity CB14A-A2/12 V 14.0 Ah
Headlight type: Halogen bulbModel YFM25BV
EE.book Page 5 Friday, May 27, 2005 5:00 PM

10-6
Bulb voltage, wattage
× quantity:
Headlight 12 V 30/30 W
× 2
Tail/brake light 12 V 5/21 W
× 1
Indicator light:
Neutral 12 V 1.7 W
× 1
Reverse 12 V 1.7 W × 1
Fuse: 20.0 AModel YFM25BV
EE.book Page 6 Friday, May 27, 2005 5:00 PM