navigation YAMAHA FX HO CRUISER 2022 Owners Manual
[x] Cancel search | Manufacturer: YAMAHA, Model Year: 2022, Model line: FX HO CRUISER, Model: YAMAHA FX HO CRUISER 2022Pages: 136, PDF Size: 5.62 MB
Page 20 of 136
Safety information
11
tercraft, otherwise you increase your
chance of hitting a submerged object,
which could result in injury.
This watercraft is not equipped with light-
ing required for night operation. Do not op-
erate the watercraft after sunset or before
dawn, otherwise you increase the risk of
colliding with another boat, which could re-
sult in severe injury or death.
Follow navigation rules, and state/provin-
cial and local laws that apply to watercraft.
EJU43131
Operation requirements
All riders must wear a personal flotation de-
vice (PFD) that is approved by the appro-
priate authorities and is suitable for
personal watercraft use.
Wear protective clothing. Severe internal
injuries can occur if water is forced into
body cavities as a result of falling into the
water or being near the jet thrust nozzle.
You must wear shorts with neoprene (wet-
suit material) to keep water from being
forcefully injected into the rectum or vagina
during a fall backward. Riders not wearing
neoprene shorts have received severe rec-
tal, vaginal, and internal injuries resulting in
permanent damage. Normal swimwear
does not offer adequate protection.
Eye protection is recommended to keep
wind, water, and glare from the sun out of
your eyes while you operate your water-
craft. Restraining straps for eyewear are
made which are designed to float should
your eyewear fall in the water.
Footwear and gloves are recommended.
You must decide whether to wear a helmet
while you ride for recreation. You should
know that a helmet could help protect you
60 cm (2 ft)
1Authority-approved PFD
2 Wetsuit bottom
1
2
UF3V73E0.book Page 11 Friday, October 8, 2021 1:30 PM
Page 57 of 136
Instrument operation
48
(3) Select the target waypoint to display thewaypoint details.
(4) Select “Go-To” displayed in the way- point details pop-up.
TIP
When the “Go-To” function is activated,
the “Go-To” button changes color to red.
The “Go-To” function can also be activated
from the waypoint manager on the settings
screen.
The “Go-To” function can also be activated
by selecting a waypoint “ ” displayed on
the map screen.
Activating the “Go-To” function displays
directional assistance to the waypoint on
the map screen.
When you arrive at the target waypoint using
the “Go-To” function, a pop-up window ap-
pears. After arriving at the waypoint, select
“Yes” to stop the “Go-To” function. To stop the “Go-To” function before arriving
at the target waypoint, select “ ” for direc-
tional assistance.
EJU46691Track
Set a track to display a course on the multi-
function information center.
You can create a track using the “Create
Track” function. You can follow a created
track using the “Follow” function. You can re-
cord the course you ran as track information
using the “Record” function.
To add a track using the “Create Track”
function:
(1) Select “ ” on the “overflow menu”.
(2) Select “Create Track”.
TIP
The maximum number of Tracks that can be
set is 5. Once the limit is reached, it is not
1
“Go-To”
1 Directional assistance
Go-ToAdd Waypoint
Waypoints
1
AKADistance: 498.50 Lat: 34.69164 Lon: 137.58110
1
1
“Yes”
1 “Create Track”
NoYe s
You have reached your destination! Would you like to
stop navigation?
1
FollowCreate TrackRecord
Tracks
REC
1
UF3V73E0.book Page 48 Friday, October 8, 2021 1:30 PM
Page 59 of 136
Instrument operation
50
TIP
The “Follow” function can be activated
from the track manager on the settings
screen.
When the “Follow” function is activated, di-
rectional assistance to the waypoint is dis-
played on the map screen.
When you arrive at the end point using the
“Follow” function, a pop-up window appears.
After arriving at the end point, select “Yes” to
stop the “Follow” function.
TIP
You can also stop the “Follow” function by
opening the track manager from the setting
menu screen.
Select “ ” on directional assistance to
stop the “Follow” function before arriving at
the end point.
To add a track using the “Record” func-
tion:
(1) Select “ ” on the “overflow menu”.
(2) Select “Record”.
(3) After arriving at the end point, select “ ” on the “overflow menu”.
(4) Select “Stop” on the pop-up window.
(5) Select “Save”.
1 Directional assistance
1 “Yes”
Following: ABA
Next Point: 3355 m
1
NoYe s
You have reached your destination! Would you like to
stop navigation?
1
1“Record”
1 “Stop”
1 “Save”
FollowCreate TrackRecord
Tracks
REC
1
NoStop
Tracks
Stop Recording Track?
1
SaveTrack Manager
Save Track?
1
UF3V73E0.book Page 50 Friday, October 8, 2021 1:30 PM