start stop button YAMAHA GRIZZLY 450 2012 Owners Manual

4-6
4
To set the clock
1. Set the display to the clock mode.
2. Push the
“/” button until the clock starts
flashing.
3. Set the hours by pushing the “ H” button.
4. Set the minutes by pushing the “M ” button.
5. Push the “/” button, and then release it to
start the clock.EBU18050Fuel gauge The fuel gauge indicates the amount of fuel in the
fuel tank. When the needle reaches the red line, re-
fill the tank at the first opportunity.
TIPIf the ATV runs out of fuel, move the fuel cock lever
to the “RES ” position. Approximately 4.5 L (1.19
US gal, 0.99 Imp.gal) of fuel will be remaining in
the tank.EBU18061Handlebar switches
1. Fuel gauge
2. Red line
1. Light switch “//OFF ”
2. Start switch “”
3. Engine stop switch “/”
4. Override switch “OVERRIDE”
5. Horn switch “”
U1CT61E0.book Page 6 Wednesday, April 20, 2011 6:36 PM