remove seats YAMAHA MT-03 2006 Owners Manual

INSTRUMENT AND CONTROL FUNCTIONS
3-14
1
2
3
4
5
6
7
8
9
10
To install the passenger seat
1. Projection
2. Seat holder
1. Insert the projection on the front
of the passenger seat into the
seat holder as shown, and then
push the back of the seat down to
lock it in place.
2. Remove the key.
EAUB1311
Seats
Passenger seat
1. Open
To remove the passenger seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
2. Pull the passenger seat off.
ECA10700CAUTION:
The following precautions must be
observed to prevent a fire hazard or
other damages.
Use only unleaded gasoline.
The use of leaded gasoline will
cause unrepairable damage to
the catalytic converter.
Never park the vehicle near
possible fire hazards such as
grass or other materials that
easily burn.
Do not allow the engine to idle
too long.
MY03 01-03 ING 6-10-2005 13:53 Pagina 3-14

1
2
3
4
5
6
7
8
9
10
INSTRUMENT AND CONTROL FUNCTIONS
3-15
1. Yamaha U-LOCK (optional)
2. Fastening strap
3. Owner’s tool kit
The passenger seat is designed to
fasten a genuine Yamaha U-LOCK to
the bottom of the seat. (Other locks
may not fit.) When fastening a U-
LOCK to the seat, securely fasten it
with the straps. When the U-LOCK is
not fastened to the seat, be sure to se-
cure the straps to prevent losing them.
Rider seat
1. Rider seat mounting bolts
To remove the rider seat
1. Remove the passenger seat.
2. Remove the bolts, and then pull
the rider seat off.
To install the rider seat
1. Projection
2. Seat holder
1. Insert the projection on the front
of the rider seat into the seat hold-
er as shown, place the seat in the
original position, and then tighten
the bolts.
2. Install the passenger seat.
NOTE:
Make sure that the seats are properly
secured before riding.
MY03 01-03 ING 6-10-2005 13:53 Pagina 3-15