SPECIFICATIONS
8-2
8
Transmission
Primary reduction system Helical gear
Primary reduction ratio 3.133
Secondary reduction system Spur gear
Secondary reduction ratio 3.583
Number of drive chain
sprocket teeth (rear/front) 43/12
Transmission type V-belt automatic
Operation Centrifugal automatic type
Chassis
Frame type Steel tube underbone
Caster angle 25°
Trail 112 mm
Tires
Fro nt
Ty p e Tu b e t i r e
Size 70/90-16 36P
Manufacturer/
model Dunlop/D110
Rear
Ty p e Tu b e t i r e
Size 80/90-16 43P
Manufacturer/
model Dunlop/D110Tire air pressure
(measured on cold tires)
Front 200 kPa (2.00 kgf/cm
2)
Rear 225 kPa (2.25 kgf/cm2)
Wheels
Fr on t
Type Spoke wheel
Size 16 × 1.40
Rear
Type Spoke wheel
Size 16 × 1.60
Brakes
Fr on t
Type Single disc brake
Operation Right hand
Fluid DOT 3 or 4
Rear
Ty p e
Drum brake
Operation Left hand
Suspension
Fr on t
Ty p e
Telescopic fork
Rear
Ty p e
Unit swing
U5MXE0.book Page 2 Thursday, December 20, 2001 2:08 PM
SPECIFICATIONS
8-3
8
Spring/shock absorbers
Front Coil spring / oil damper
Rear Coil spring / oil damper
Wheel travel
Front 80 mm
Rear 55 mm
Electrical
Ignition system DC. C.D.I.
Charging system
Type A.C. magneto
Standard output 14 V, 105 W@ 5,000 r/min
Battery
Model Local made
Voltage, capacity 12 V, 7 Ah
Headlight bulb type
Incandesce bulb
Bulb voltage, wattage
× quantity
Headlight 12 V, 25/25 W × 2
Tail/brake light 12 V, 5/21 W × 1
Turn signal light 12 V, 10 W × 4
Meter lighting 12 V, 1.7 W × 1
12 V, 3.4 W × 1
High beam indicator light 12 V, 1.7 W × 1
Turn signal indicator light 12 V, 3.4 W × 2
Fuse
10 A
U5MXE0.book Page 3 Thursday, December 20, 2001 2:08 PM
