belt YAMAHA RHINO 700 2012 User Guide

5-1
EVU01200
1 -FOR YOUR SAFETY – PRE-OPERATION CHECKS
Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always fol-
low the inspection and maintenance procedures and schedules described in the Owner’s Manual.
WARNING
Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equip-
ment damage. Do not operate the vehicle if you find any problem. If a problem cannot be corrected
by the procedures provided in this manual, have the vehicle inspected by a Yamaha dealer.Before using this vehicle, check the following points:
ITEM ROUTINE PAGE
BrakesCheck operation, free play, fluid level, and fluid leakage.
Fill with DOT 4 brake fluid if necessary.5-7–5-9, 8-87–8-89,
8-93–8-97, 8-103
Parking brakeCheck for proper operation, condition, and free play. 8-91, 8-99–8-101
FuelCheck fuel level.
Fill with fuel if necessary.5-11–5-17
Engine oilCheck oil level.
Fill with oil to proper level if necessary.5-19, 8-25–8-37
CoolantCheck coolant level.
Fill with coolant if necessary.5-21, 8-55–8-57
Final gear oil/
Differential gear oilCheck for leakage. 5-23, 8-39–8-53
Accelerator pedalCheck for proper accelerator pedal operation. 5-25
Seat beltsCheck for proper operation and belt wear. 5-25
1RB60-EE.book Page 1 Thursday, April 7, 2011 10:43 AM

5-25
EVU00450
Accelerator pedal
Check to see that the accelerator pedal operates
correctly. It must operate smoothly and spring
back to the idle position fully when released. Have
a Yamaha dealer repair as necessary for proper
operation.
EVU00460
Seat belts
Make sure that the seat belts are not frayed, torn,
stretched, or damaged. The seat belts must move
smoothly when pulled out and retract on its own
when released. The seat belts must also lock up
when quickly pulled out. The latch plate should
click securely into the buckle and release when the
release button is pushed firmly. Wash off any dirt
or mud that could affect operation. Have a
Yamaha dealer repair as necessary for proper op-
eration.
1RB60-EE.book Page 25 Thursday, April 7, 2011 10:43 AM

7-5
As the owner/operator, it is your responsibility to
protect yourself and your passenger from acci-
dents, including rollovers. The Rhino has many
features, including a protective structure and seat
belts, to help protect occupants, but the best way
to avoid injuries is to avoid accidents. There is a
risk of injury or death in any accident, even with
these safety features.
1RB60-EE.book Page 5 Thursday, April 7, 2011 10:43 AM

7-9
Passenger requirements
This vehicle is designed for the operator and one
passenger. Allowing passengers to ride improper-
ly can lead to serious injury or death. As the oper-
ator, you are responsible for your passenger.

Your passenger must be able to place both feet
on the floorboard while seated upright with his/
her back against the backrest.


Your passenger must be able to reach and hold
the handholds.


Allow only one passenger in the vehicle and
only in the designated passenger seat. Do not
carry any other passengers. Do not carry pas-
sengers in the cargo bed.


Do not allow someone to ride as a passenger
who has been using drugs or alcohol.


Do not allow children who need child safety
seats or booster seats in the Rhino. The seat
belt is not designed to restrain automotive child
safety seats.
1RB60-EE.book Page 9 Thursday, April 7, 2011 10:43 AM

7-11 1. Seat belt 2. Hip restraint 3. Door
1. Ceinture de sécurité2. Garde-corps 3. Portière
1. Cinturón de seguridad 2. Sujeción lateral 3. Puerta
1
32
1. Passenger handhold 2. Hip restraint 3. Door
1. Poignée du passager 2. Garde-corps 3. Portière
1. Asidero del pasajero 2. Sujeción lateral 3. Puerta
32
1
Occupant protection system
WARNING
Do not make changes to the occupant protec-
tion system. If you install aftermarket products
or have your vehicle modified, you may put
yourself and others at greater risk of serious
injury or death. You are responsible for any
such changes to the vehicle.The Rhino comes with a variety of features to help
reduce the risk of driver and passenger injury.
These features work together, and when properly
used, these features will help protect the occu-
pants in the event of an accident. If these features
are not used properly, they can cause injury.
1RB60-EE.book Page 11 Thursday, April 7, 2011 10:43 AM

7-15
Body parts outside of vehicle can be struck by
passing objects or crushed during vehicle rollover.
Do not put your hands or feet outside of the vehicle
for any reason. Do not hold onto the door, cage/
frame or hip restraint. Wear your seat belt and hel-
met.
If you think or feel that the vehicle may tip or roll,
do not put your hands or feet outside the vehicle
for any reason. You will not be able to stop the ve-
hicle from tipping over using your body. Any part of
your body (arms, legs, or head) outside of the ve-
hicle can be crushed by the vehicle cage/frame.
1RB60-EE.book Page 15 Thursday, April 7, 2011 10:43 AM

7-17
Seat belts
Seat belts should be worn by both driver and pas-
senger. Driver must be sure that the passenger is
belted before driving.

Be sure the seat belt is not twisted, is close-
fitting across the hips and chest, and is
latched securely.


Do not wear the lap belt across the abdomen
or stomach.


Do not put the shoulder belt behind the back.
Failure to use seat belts properly may lead to an
increased likelihood and severity of injury.
1RB60-EE.book Page 17 Thursday, April 7, 2011 10:43 AM

7-19
An unbelted occupant may strike the interior of the
vehicle, the protective structure, or other objects in
an accident or during operation. You may also fall
completely out or be partially ejected from the ve-
hicle, which may lead to being crushed between
the ground and the vehicle. Wearing the seat belt
helps you remain in the vehicle – the doors and
handholds are not a substitute for using a seat
belt.
A crash can damage the restraint systems in your
vehicle. A damaged restraint system may not
properly protect the person using it, resulting in se-
rious injury or death in a crash. To help make sure
your restraint systems are working properly after a
crash, have them inspected and any necessary re-
placements made as soon as possible.
1RB60-EE.book Page 19 Thursday, April 7, 2011 10:43 AM

7-21 1. Seat belt (× 2) 2. Latch plate (× 2) 3. Buckle (× 2)
1. Ceinture de sécurité (× 2) 2. Attache (× 2)
3. Boucle (× 2)
1. Cinturón de seguridad (× 2) 2. Hebilla (× 2)
3. Cierre (× 2)
1
2
3
To wear the seat belt properly, do the following:
1. Hold the latch plate as you pull the belt
across your lap and chest. Make sure the belt
is not twisted and is not caught on any portion
of the vehicle, your clothing, or any equip-
ment you are carrying.
2. If the latch plate is not positioned in the cor-
rect location along the seat belt, squeeze the
latch plate ends together along its long edges
in order to more easily adjust its location up
or down along the length of the belt.
1RB60-EE.book Page 21 Thursday, April 7, 2011 10:43 AM

7-23 1. Buckle 2. Latch plate 3. Release button
1. Boucle 2. Attache
3. Bouton de dégagement
1. Hebilla 2. Fijación
3. Botón de desbloqueo
1
3
2
1. Seat belt height adjuster 2. Seat belt 3. Slot
1. Dispositif de règlement de hauteur de ceinture de sécurité
2. Ceinture de sécurité3. Fente
1. Regulador de altura del cinturón de seguridad
2. Cinturón de seguridad 3. Ranura
1
2
3
3. Push the latch plate into the buckle until it
clicks. Pull up on the latch plate to make sure
it is secure.
4. Put the lap portion of the belt low on your
hips. Pull up on the shoulder part so the belt
is snug across your hips. Be sure the seat
belt is not caught on the hip restraint or other
object.
5. Position the shoulder belt over your shoulder
and across your chest. The shoulder belt
should fit against your chest. If it is loose, pull
the belt out all the way and then let it retract.
6. Check if the seat belt shoulder position suits
the size of the driver and passenger.
To lower the belt, insert the belt into the seat
belt height adjuster slot as shown. To raise
the belt, remove the belt from the height ad-
juster slot.
7. To release the buckle, firmly press the re-
lease button.
1RB60-EE.book Page 23 Thursday, April 7, 2011 10:43 AM