drain bolt YAMAHA RHINO 700 2012 Owners Manual

8-29 1. Engine oil drain bolt 2. Gasket
1. Vis de vidange d’huile moteur 2. Joint
1. Tornillo de vaciado del aceite del motor 2. Junta
2
1
To change the engine oil (with or without oil fil-
ter cartridge replacement)
1. Park the vehicle on a level surface.
2. Remove the console. (See pages 8-21–8-23
for console removal and installation proce-
dures.)
3. Start the engine, warm it up for several min-
utes, and then turn it off.
4. Place an oil pan under the engine to collect
the used oil, and then remove the dipstick.
5. Remove the engine oil drain bolt and its gas-
ket to drain the oil from the crankcase.
1RB60-EE.book Page 29 Thursday, April 7, 2011 10:43 AM

8-35
10. Lower the cargo bed.
11. Reinstall the engine oil drain bolt and its new
gasket, and then tighten the bolt to the speci-
fied torque.
12. Refill with the specified amount of recom-
mended engine oil, and then insert the dip-
stick completely into the oil filler hole.TIPBe sure to wipe off spilled oil on any parts after the
engine and exhaust system have cooled down.
Tightening torque:
Engine oil drain bolt:
30 Nm (3.0 m·kgf, 22 ft·lbf)
Recommended engine oil:
See pages 10-1–10-2.
Oil quantity:
Without oil filter cartridge replacement:
2.00 L (2.11 US qt, 1.76 Imp.qt)
With oil filter cartridge replacement:
2.10 L (2.22 US qt,1.85 Imp.qt)
1RB60-EE.book Page 35 Thursday, April 7, 2011 10:43 AM

8-41 1. Final gear case guard 2. Bolt and collar (× 7)
1. Protège-carter de carter de couple conique
2. Vis et entretoise (× 7)
1. Protección de la caja del engranaje final
2. Perno y casquillo (× 7)
2
1
2
1. Final gear oil drain bolt 2. Gasket
1. Vis de vidange d’huile de couple conique arrière
2. Joint
1. Tornillo de vaciado de aceite de la transmisión final
2. Junta
12
Changing the final gear oil
1. Park the vehicle on a level surface.
2. Remove the final gear case guard by remov-
ing the bolts and the collars.
3. Place an oil pan under the final gear case to
collect the used oil.
4. Remove the final gear oil filler bolt and its
O-ring, the final gear oil drain bolt and its gas-
ket to drain the oil.
5. Reinstall the drain bolt and its new gasket,
and then tighten the bolt to the specified
torque.
Tightening torque:
Final gear oil drain bolt:
20 Nm (2.0 m·kgf, 14 ft·lbf)
1RB60-EE.book Page 41 Thursday, April 7, 2011 10:43 AM

8-49 1. Differential gear case guard 2. Bolt and collar (× 7)
1. Protège-carter de différentiel 2. Vis et entretoise (× 7)
1. Protección del diferencial 2. Perno y casquillo (× 7)
1
2
22
1. Differential gear oil drain bolt 2. Gasket
1. Vis de vidange de l’huile de différentiel
2. Joint
1. Tornillo de vaciado de aceite del diferencial
2. Junta
12
Changing the differential gear oil
1. Park the vehicle on a level surface.
2. Remove the differential gear case guard by
removing the bolts and the collars.
3. Place an oil pan under the differential gear
case to collect the used oil.
4. Remove the differential gear oil filler bolt, the
differential gear oil drain bolt and their gasket
to drain the oil.
5. Reinstall the differential gear oil drain bolt
and its new gasket, and tighten the bolt to the
specified torque.
Tightening torque:
Differential gear oil drain bolt:
9.8 Nm (0.98 m·kgf, 7.1 ft·lbf)
1RB60-EE.book Page 49 Thursday, April 7, 2011 10:43 AM