low beam YAMAHA TW125 2000 Owners Manual

3-1
EAU00027
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9
EAU00028Main switch
The main switch controls the igni-
tion and lighting systems. Its oper-
ation is described below.
EAU00036ON
Electrical circuits are switched on.
The engine can be started. The key
cannot be removed in this position.
EAU00038OFF
All electrical circuits are switched
off. The key can be removed in this
position.
EAU00056Indicator lights
EAU00057Turn indicator light “5”
This indicator flashes when the
turn switch is moved to the left or
right.
EAU00063High beam indicator light “&”
This indicator comes on when the
headlight high beam is used.
1. Turn indicator light “5”
2. High beam indicator light “&”
3. Neutral indicator light “N”
EAU00061Neutral indicator light “N”
This indicator comes on when the
transmission is in neutral.
OFFON
312
5EK-9-E1 (TW125)<3.1> 4/6/0 11:50 PM Page 11

3-2
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9
EAU01087Speedometer
The speedometer shows riding
speed. This speedometer is
equipped with an odometer and
trip odometer. The trip odometer
can be reset to “0” with the reset
knob. Use the trip odometer to
estimate how far you can ride on a
tank of fuel. This information will
enable you to plan fuel stops in the
future.
1. Reset knob
2. Speedometer
3. Odometer
4. Trip odometer
EAU00118Handlebar switchesEAU00121Dimmer switch
Turn the switch to “&” for the
high beam and to “%” for the low
beam.
1. Lights switch
2. Dimmer switch
3. Turn signal switch
4. Horn switch “*”
NOTE:
(for German model equipped with
speed limiter only)
This motorcycle is equipped with a
speed limiter which prevents it
from exceeding a top speed of 80
km/h.
1
2
3
4
4
1
2
3
5EK-9-E1 (TW125)<3.1> 4/6/0 11:50 PM Page 12