7-5
MOTORCYCLE CARE AND STORAGE
1
2
3
4
5
67
8
96. Lubricate all control cables and
the pivoting points of all levers
and pedals as well as of the
sidestand/centerstand.
7. Check and, if necessary, correct
the tire air pressure, and then lift
the motorcycle so that both of its
wheels are off the ground.
Alternatively, turn the wheels a
little every month in order to pre-
vent the tires from becoming
degraded in one spot.
8. Cover the muffler outlet with a
plastic bag to prevent moisture
from entering it.
9. Remove the battery and fully
charge it. Store it in a cool, dry
place and charge it once a
month. Do not store the battery
in an excessively cold or warm
place (less than 0 ¡C or more
than 30 ¡C). For more informa-
tion on storing the battery, see
page 6-33.
NOTE:
Make any necessary repairs before
storing the motorcycle.
5EK-9-E2 (TW125)<3.3Passport> 5/23/00 9:47 AM Page 76
8-3
SPECIFICATIONS
1
2
3
4
5
6
78
9
Maximum load* 180 kg
Air pressure (cold tire)
up to 80 kg load*
Front
150 kPa (1.50 kg/cm
2, 1.50 bar)
Rear
150 kPa (1.50 kg/cm
2, 1.50 bar)
80 kg loadÐMaximum
load*
Front
150 kPa (1.50 kg/cm
2, 1.50 bar)
Rear
175 kPa (1.75 kg/cm
2, 1.75 bar)
Off-road riding
Front
125 kPa (1.25 kg/cm
2, 1.25 bar)
Rear
125 kPa (1.25 kg/cm
2, 1.25 bar)
*Load is total weight of cargo, rider, passenger and accessories.Wheels
Front
Type Spoke wheel
Size 2.50 ´18
Rear
Type Spoke wheel
Size 14M/C ´MT4.50
Brakes
Front
Type Single disc brake
Operation Right hand operation
Fluid DOT 4Rear
Type Drum brake
Operation Right foot operation
Suspension
Front
Type Telescopic fork
Rear
Type Swingarm (Monocross
suspension)
Spring/shock absorber
Front Coil spring/oil damper
Rear Coil-gas spring/oil damper
Wheel travel
Front 160 mm
Rear 150 mm
Electrical
Ignition system C.D.I.
Charging system
Type C.D.I. magneto
Nominal output 12 V, 170W @ 5,000 r/min
Battery
Type GM7CZ-3D
Voltage, capacity 12 V, 7 AH
5EK-9-E2 (TW125)<3.3Passport> 5/23/00 9:47 AM Page 79
