bulb YAMAHA WARRIOR 350 2003 Manuale de Empleo (in Spanish)

Cable inspection and lubrication ........ 8-65
Brake and shift pedal/brake and
clutch lever lubrication...................... 8-65
Front upper and lower arm
pivot lubrication ................................ 8-67
Rear arm pivot lubrication .................. 8-69
Wheel removal ................................... 8-71
Wheel installation ............................... 8-73
Battery ................................................ 8-75
Replenishing the battery fluid ............. 8-79
Fuse replacement............................... 8-83
Replacing a headlight bulb ................. 8-85
Headlight beam adjustment................ 8-93
Tail/brake light bulb replacement ....... 8-95
Troubleshooting.................................. 8-97
Troubleshooting chart......................... 8-99
CLEANING AND STORAGE ................... 9-1
A. Cleaning ........................................... 9-1
B. Storage ............................................ 9-7
9
SPECIFICATIONS................................. 10-1
CONVERSION TABLE .......................... 11-1
1011
U5NF61.book Page 3 Wednesday, June 13, 2001 5:18 PM

8-85 1. Bolt (× 3)
1. Boulon (× 3)
1. Perno (× 3)
1. Coupler (× 2)
1. Coupleur (× 2)
1. Acoplador (× 2)
EBU00954*
Replacing a headlight bulb
If a headlight bulb burns out, replace it as follows.
1. Remove the headlight assembly by removing
the bolts.
2. Disconnect the couplers.
U5NF61.book Page 85 Wednesday, June 13, 2001 5:18 PM

8-89 1. Headlight bulb holder cover
1. Cache de la fixation d’ampoule
1. Cubierta del portabombillas del faro
1. Headlight bulb holder
1. Fixation d’ampoule
1. Portabombillas del faro
5. Remove the headlight bulb holder cover.
6. Turn the headlight bulb holder counterclock-
wise and remove the defective bulb.
WARNING
_ The headlight bulb is hot when it is on and im-
mediately after it is turned off. Wait for the bulb
to cool before touching or removing it. You can
be burned, or a fire could start if the bulb
touches something flammable. _
U5NF61.book Page 89 Wednesday, June 13, 2001 5:18 PM

8-91 1. Headlight bulb holder cover
2. Headlight bulb holder
1. Cache de la fixation d’ampoule
2. Fixation d’ampoule
1. Cubierta del portabombillas del faro
2. Portabombillas del faro
7. Put a new headlight bulb into position and se-
cure it in place with the bulb holder.
8. Install the headlight bulb holder cover.CAUTION:_ Make sure the headlight bulb holder cover is
securely fitted over the bulb holder. _9. Install the headlight unit cover by installing
the screw.
10. Install the headlight unit by installing the bolt.
11. Connect the couplers.
12. Install the headlight unit assembly by install-
ing the bolts.
13. Adjust the headlight beam if necessary.
U5NF61.book Page 91 Wednesday, June 13, 2001 5:18 PM

8-95 1. Tail/brake light bulb holder
1. Fixation d’ampoule de feu arrière/stop
1. Portalámparas de la luz de freno/piloto trasero
1. Tail/brake light bulb holder
2. Bulb
1. Fixation d’ampoule de feu arrière/stop
2. Ampoule
1. Portalámparas de la luz de freno/piloto trasero
2. Bombillas
EBU00861
Tail/brake light bulb replacement
1. Remove the bulb holder (together with the
bulb) by turning it counterclockwise.
2. Remove the defective bulb from the bulb
holder by pushing it inward and turning it
counterclockwise.
3. Install a new bulb in the bulb holder by push-
ing it inward and turning it clockwise.
4. Install the bulb holder (together with the bulb)
by turning it clockwise.
U5NF61.book Page 95 Wednesday, June 13, 2001 5:18 PM

10-5
Shock absorber:
Front
RearCoil spring / oil damper
Coil spring / gas-oil damper
Wheel travel:
Front
Rear200 mm
200 mm
Electrical:
Ignition system
Generator system
Battery type/voltage, capacityD.C. C.D.I.
A.C. magneto
GM12CZ-4A-2/12V, 12Ah
Headlight type: Krypton bulb
Bulb voltage, wattage
× quantity:
Headlight
Tail/brake light
Indicator light:
Neutral
Reverse12V, 30W/30W
× 2
12V, 5W/21W
× 1
12V, 3.4W
× 1
12V, 3.4W
× 1
Fuse: 15AMODEL YFM350X
U5NF61.book Page 5 Wednesday, June 13, 2001 5:18 PM