transmission oil YAMAHA XMAX 250 2005 Owners Manual

YAMAHA XMAX 250 2005 Owners Manual XMAX 250 2005 YAMAHA YAMAHA https://www.carmanualsonline.info/img/51/52941/w960_52941-0.png YAMAHA XMAX 250 2005 Owners Manual

Page 6 of 68

YAMAHA XMAX 250 2005  Owners Manual SAFETY INFORMATION.....................1-1
DESCRIPTION.....................................2-1
Left view ...........................................2-1
Right view .....................................

Page 29 of 68

YAMAHA XMAX 250 2005  Owners Manual 4
PRE-OPERATION CHECKS
4-2
EAU15603
Pre-operation check list
ITEM CHECKS PAGE
• Check fuel level in fuel tank.
Fuel• Refuel if necessary.3-9
• Check fuel line for leakage.
• Check oil level in

Page 33 of 68

YAMAHA XMAX 250 2005  Owners Manual EAU16841
Engine break-in
There is never a more important
period in the life of your engine than
the period between 0 and 1600 km
(1000 mi). For this reason, you should
read the following material care

Page 37 of 68

YAMAHA XMAX 250 2005  Owners Manual ODOMETER READING (x 1000 Km) ANNUAL
CHECK
NoITEM CHECK OR MAINTENANCE JOB 1 10 20 30 40
22Final transmission oil• Check vehicle for oil leakage.√√ √• Change.√√√
23 *V-belt• Replace.

Page 41 of 68

YAMAHA XMAX 250 2005  Owners Manual NOTE:
Make sure that the washer is properly
seated.
6. Add the specified amount of the
recommended engine oil, and
then install and tighten the oil
filler cap.
ECA11670
CAUTION
Do not use oils with a

Page 42 of 68

YAMAHA XMAX 250 2005  Owners Manual 6. Add the specified amount of the
recommended final transmission
oil, and then install and tighten
the oil filler cap.
EWA11310
s s
WARNING
Make sure that no foreign
material enters the final trans-

Page 63 of 68

YAMAHA XMAX 250 2005  Owners Manual DimensionsOverall length
2210 mm
Overall width
790 mm
Overall height
1380 mm
Seat height
775 mm
Wheelbase
1545 mm
Ground clearance
113 mm
WeightDry (without oil and fuel)
164.0 kg
With oil and fuel
17

Page 67 of 68

YAMAHA XMAX 250 2005  Owners Manual AAcceleration and deceleration ...................5-2
Adjusting the carburetor ..........................6-11
Adjusting the shock absorber 
assemblies .............................................3-11