warning YAMAHA XMAX 250 2008 Owner's Manual

YAMAHA XMAX 250 2008 Owner's Manual XMAX 250 2008 YAMAHA YAMAHA https://www.carmanualsonline.info/img/51/52923/w960_52923-0.png YAMAHA XMAX 250 2008 Owner's Manual

Page 42 of 88

YAMAHA XMAX 250 2008 Owners Manual EAU17280
Safety is an obligation of the owner.
Periodic inspection, adjustment and
lubrication will keep your vehicle in
the safest and most efficient condi-
tion possible. The most important
points o

Page 43 of 88

YAMAHA XMAX 250 2008 Owners Manual NOTE:
If you do not have the tools or expe-
rience required for a particular job,
have a Yamaha dealer perform it for
you.
EWA10350
s s
WARNING
Modifications not approved by
Yamaha may cause loss of p

Page 53 of 88

YAMAHA XMAX 250 2008 Owners Manual 6. Add the specified amount of the
recommended final transmission
oil, and then install and tighten
the oil filler cap.
EWA11310
s s
WARNING
●Make sure that no foreign
material enters the final tran

Page 54 of 88

YAMAHA XMAX 250 2008 Owners Manual 1. Coolant reservoir cap
ECA10471
CAUTION:
●If coolant is not available, use
distilled water or soft tap water
instead. Do not use hard water
or salt water since it is harmful
to the engine.
●If w

Page 57 of 88

YAMAHA XMAX 250 2008 Owners Manual EAU21871
Tires
To maximize the performance, durabi-
lity, and safe operation of your vehi-
cle, note the following points regar-
ding the specified tires.
Tire air pressure
The tire air pressure shoul

Page 58 of 88

YAMAHA XMAX 250 2008 Owners Manual Tire inspection
1. Tire tread depth
2. Tire sidewall
The tires must be checked before
each ride. If the center tread depth
reaches the specified limit, if the tire
has a nail or glass fragments in it,

Page 59 of 88

YAMAHA XMAX 250 2008 Owners Manual EAU21960
Cast wheels
To maximize the performance, durabi-
lity, and safe operation of your vehi-
cle, note the following points regar-
ding the specified wheels.
●The wheel rims should be chec-
ked

Page 62 of 88

YAMAHA XMAX 250 2008 Owners Manual EAU23100
Checking and lubricating the
cables
The operation of all control cables
and the condition of the cables
should be checked before each ride,
and the cables and cable ends should
be lubricated

Page 63 of 88

YAMAHA XMAX 250 2008 Owners Manual EAU23212
Checking and lubricating the
centerstand and sidestand
1. Sidestand
1. Centerstand
The operation of the centerstand and
sidestand should be checked before
each ride, and the pivots and metal-

Page 64 of 88

YAMAHA XMAX 250 2008 Owners Manual 2. While applying the front brake,
push down hard on the handle-
bars several times to check if the
front fork compresses and
rebounds smoothly.
ECA10590
CAUTION:
If any damage is found or the front
f
Page:   < prev 1-10 11-20 21-30 31-40 next >