brake YAMAHA XT660Z 2012 Owner's Manual

MOTORCYCLE CARE AND STORAGE
8-3
1
2
3
4
5
\f
7
8
9
1\b
8. Let the motorcycle dry completely before \ftoring or co\bering it.
EWA11131
WARNING0
Contaminants on the brakes or
tires can cause loss \5of control.
●Make sure that there is no oil or
wax on the brakes \5or tires.
●If necessary, clean the brake
discs and brake linings with a
regular brake disc cleaner or
acetone, and wash the tires
with warm water and a mild de-
tergent. Before riding at higher
speeds, test the motorcycle's
braking performance and cor-
nering behavior.
ECA10800
NOTICE
●Apply spray oil and wax spar-
ingly and make sure to wipe off
any excess
●Never apply oil or wax to any
rubber and plastic parts, but
treat them with a suitable care
product.
●Avoid using abrasive polishing
compounds as they will wear
away the paint.
TIP
●Con\fult a Yamaha dealer for ad-
\bice on what product\f\f to u\fe.
●Wa\fhing, rainy weather or humid
climate\f can cau\fe the headlight
len\f to fog. Turning the headlight
on for a \fhort period of time will
help remo\be the moi\fture from
the len\f.
EAUM1901
Storage
Short-term
Alway\f \ftore your motorcycle in a cool,
dry place and, if nece\f\fary, protect it
again\ft du\ft with a porou\f co\ber.
ECA10810
NOTICE
●Storing the motorcycle in a
poorly ventilated room or cov-
ering it with a tarp, while it is
still wet, will allow water and
humidity to seep in and cause
rust.
●To prevent corrosion, avoid
damp cellars, stables (because
of the presence of ammonia)
and areas where strong chemi-
cals are stored.
XT660Z 08-10 ING-AUS:MY03 07-10 ING 11-05-2009 10:10 Pagina 4

1
2
3
4
5
6
7
8
9
10
SPECIFICATIO\fS
9-2
Operation:Left foot operation
Gear ratio: 1
st:\f0/12 (2\b500)
2
nd:
26/16 (1\b625)
\f
rd: 2\f/20 (1\b150)
4
th: 20/22 (0\b909)
5
th: 20/26 (0\b769)
Chass\bs:
Frame type:
Diamond
Caster angle: 28°
Trail: 11\f\b0 mm (4\b44 in)
Front t\bre:
Type:With tube
Size: 90/90-21M/C 54S,
90/90-21M/C 54T
Manufacturer/model: METZELER/TOURANCE FRONT
MICHELIN/SIRAC
Rear t\bre:
Type:With tube
Size: 1\f0/80-17M/C 65S,
1\f0/80-17M/C 65T Manufacturer/model:
METZELER/TOURANCE
MICHELIN/SIRAC A
Load:
Maximum load:190 kg (419 lb)
(Total weight of rider, passenger, cargo
and accessories)
T\bre a\br pressure
(measured on cold t\bres):
Load:Up to 90 kg (0-198 lb)
Front: 210 kPa (\f0 psi) (2\b1 kgf/cm
2)
Rear: 2\f0 kPa (\f\f psi) (2\b\f kgf/cm
2)
Load: 90-190 kg (198-419 lb)
Front: 2\f0 kPa (\f\f psi) (2\b\f kgf/cm
2)
Rear: 250 kPa (\f6 psi) (2\b5 kgf/cm
2)
Off-road riding:
Front: 200 kPa (29 psi) (2\b0 kgf/cm
2)
Rear: 200 kPa (29 psi) (2\b0 kgf/cm
2)
High-speed riding:
Front: 210 kPa (\f0 psi) (2\b1 kgf/cm
2)
Rear: 2\f0 kPa (\f\f psi) (2\b\f kgf/cm
2)
Front wheel:
Type:
Spoke wheel
Rim size: 21 x 1\b85
Rear wheel:
Type:Spoke wheel
Rim size: 17M/C x MT2\b75
Front brake:
Type:Dual disc brake
Operation: Right hand
Fluid: DOT 4
Rear brake:
Type:Single disc brake
Operation: Right foot
Fluid: DOT 4
Front suspens\bon:
Type:Telescopic fork
Spring/damper type: Coil spring/oil damper
Wheel travel: 210 mm (8\b26 in)
XT660Z 08-10 ING-AUS:MY03 07-10 ING 11-05-2009 10:10 Pagina 7

1
2
3
4
5
6
7
8
9
10
INDEX
AAftermarket Parts, Accessories, and Modifications ...................................\f\.-4
Aftermarket Tires and \bims ...............\f-4
Air filter element, cleaning the check hose ....................................\...........7-14
Air filter element, replacing ..............7-14
Auxiliary light bulb, replacing............7-35
Avoid Carbon Monoxide poisoning ....\f-\f
B Battery ....................................\...........7-30 To access the battery ...................7-30
To charge the battery....................7-30
To store the battery.......................7-31
Be a \besponsible Owner ...................\f-1
Brake and clutch levers, checking and lubricating ..............................7-\f6\.
Brake fluid ....................................\.....7-\f\f Changing ....................................\...7-\f3
Checking fluid level .......................7-\f\f
Brake lever ....................................\....4-11
Brake pads, checking .......................7-\f1
Brake pedal ....................................\...4-11 Checking ....................................\....7-\f7
Lubricating ....................................\.7-\f7
C Cables, checking and lubricating .....7-\f5
Carbon Monoxide (avoid Carbon Monoxide poisoning).......................\f-\f
Care and storage ...............................8-1\. Catalytic converter ...........................4-13
Checking and lubricating the brake
and clutch levers ...........................7-\f6
Checking and lubricating the brake pedal ....................................\..........7-\f7
Checking and lubricating the cables..7-\f5
Checking and lubricating the sidestand ....................................\...7-\f7
Checking and lubricating the throttle grip and cable ...............................7-\f\.6
Checking the brake pedal ................7-\f7
Checking the sidestand switch .........4-18
Clock mode ....................................\.....4-7
Clutch lever ....................................\...4-10
Clutch lever free play, adjusting .......7-\f0
Consumer information ......................10-1
Controls and instruments ...................3-3 Function ....................................\.......4-1
Coolant ....................................\..........7-1\f
Coolant temperature warning light .....4-4
D Description ....................................\......3-1 Controls and instrument .................3-3
Left view....................................\.......3-1
\bight view ....................................\....3-\f
Dimmer switch....................................\.4-9
Drive chain, cleaning and lubricating ..............................7-\f5\.
Drive chain slack ..............................7-\f3\. Adjusting ....................................\....7-\f3
Checking ....................................\....7-\f3 Cleaning and lubricating ...............7-\f5
E Emission control system (periodic maintenance chart) .........................7-\f
Engine break-in ..................................6\.-3
Engine idling speed, adjusting .........7-15
Engine oil and oil filter element ..........7-9
Engine oil filter element....................7-10
Engine stop switch .............................4-9
Engine trouble warning light...............4-4
F For your safety - Pre-operation checks ....................................\..........5-1
Front fork ....................................\.......4-15 Adjusting ....................................\....4-15
Checking ....................................\....7-\f8
Front wheel ....................................\...7-36 Installing....................................\.....7-37
\bemoving....................................\...7-36
Fuel ....................................\...............4-1\f
Fuel consumption, tips for reducing ...6-3
Fuel meter ....................................\.......4-7
Fuel tank breather hose ...................4-13
Fuel tank cap ...................................4\.-11
Fuses, replacing ...............................7-3\.1
\f Genuine Yamaha Accessories ...........\f-3
H Handlebar switches ............................4-9
XT660Z 08-10 ING-AUS:MY03 07-10 ING 11-05-2009 10:10 Pagina 1

Dimmer switch ..................\o..............4-9
Engine sto\f switch..................\o........4-9
Hazar\b switch ..................\o.............4-10
Horn switch ..................\o..................\o.4-9
Pass switch ..................\o..................\o.4-9
Start switch ..................\o..................\o.4-9
Turn signal switch ..................\o.........4-9
Hea\blight bulb, re\flacing .................7\o-33
High beam in\bicator light ..................\o.4-4
Horn switch ..................\o..................\o....4-9
I I\bentification numbers ..................\o....10-1
I\bling s\fee\b, checking ..................\o...7-15
Ignition circuit cut-off system............4-17 Checking o\feration \froce\bure .....4-18
Immobilizer system ..................\o..........4-1
Immobilizer system in\bicator light ......4-4
In\bicator an\b warning lights ...............4-3\o Coolant tem\ferature warning light ..................\o..................\o.........4-4
Engine trouble warning light ...........4-4
High beam in\bicator light ................4-\o4
Immobilizer system in\bicator light ..................\o..................\o.........4-4
Neutral in\bicator light ..................\o....4-4
Turn signal in\bicator light................4-\o3
Instruments ..................\o..................\o....4-3
Instrument an\b control functions ........4-1
K Keys ..................\o..................\o...............4-1\o L
Labels (location of im\fortant labels) ..1-1
License \flate light bulb, re\flacing....7-35
Location of im\fortant labels ...............1-1\o
Loa\bing ..................\o..................\o..........2-3
Lubricating the brake an\b clutch levers ..................\o................7-\o26
Lubricating the brake \fe\bal..............7\o-27
Lubricating the cables ..................\o....7-25
Lubricating the \brive chain ...............7-2\o5
Lubricating the si\bestan\b .................7\o-27
Lubricating the throttle gri\f an\b cable ..................\o..................\o..7-26
Lubricating the swingarm \fivots.......7-28
M Main switch/steering lock ..................\o.4-2
Mo\bel label ..................\o..................\o...10-1
Motorcycle noise regulation (for Australia) ..................\o..............10-2\o
Multi-function \bis\flay..................\o........4-5 Clock mo\be ..................\o..................\o.4-7
Self-\biagnosis \bevices ..................\o..4-7
Tachometer ..................\o..................\o.4-6
Tri\fmeter an\b tachometer mo\bes ..4-6
N Neutral in\bicator light ..................\o.......4-4
O Oil filter element ..................\o.............7-10
O\feration an\b im\fortant ri\bing \foints ..................\o..................\o..........6-1 Owner’s tool kit ..................\o................7-\o1
P Panels, removing an\b installing .........7-6
Parking ..................\o..................\o...........6-4
Pass switch ..................\o..................\o....4-9
Perio\bic maintenance an\b a\bjustment ..................\o.............7-1
Perio\bic maintenance chart for the emission control system ...........7-2
Pre-o\feration check list ..................\o...5-2
Pre-o\feration checks ..................\o.......5-1
R Rear sus\fension, lubricating............7-27
Rear wheel ..................\o..................\o...7-38 Installing..................\o..................\o....7-39
Removing..................\o..................\o..7-38
Recor\b the i\bentification numbers ...10-1
S Safety information ..................\o............2-1
Seat ..................\o..................\o..............4-14\o
Self-\biagnosis \bevices ..................\o.....4-7
Shift \fe\bal ..................\o..................\o....4-10
Shifting ..................\o..................\o...........6-2
Shock absorber assembly (a\bjusting) ..................\o..................\o.4-16
Si\bestan\b ..................\o..................\o.....4-17
Si\bestan\b, checking an\b lubricating ..................\o..................\o.7-27
Si\bestan\b switch, checking ..............4-18\o
S\fark \flug, checking..................\o........7-8
INDEX
Australia 5/8/10 \á 16:21 Pá\fina 94