sensor YAMAHA XT660Z 2012 Owners Manual

1
2
3
4
5
6
7
8
9
10
OPERATION AN\f IMPORTANT RI\fING POINTS
EAU15951
Read the Owner's \fanual care\bully to
become \bamiliar with all controls. I\b
there is a control or \bunction you do not
understand, ask your Yamaha dealer.
EWA10271
\bARNING0
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.
6-1
EAU48020
TIP
This model is equipped with a lean an-
gle sensor to stop the engine in case
o\b a turnover. In this case, the multi-
\bunction display indicates error code
30, but this is not a mal\bunction. Turn
the key to "OFF" and then to "ON" to
clear the error code. Failing to do so
will prevent the engine \brom starting
even though the engine will crank
when pushing the st\sart switch.
EAUB1570
Starting the engine
In order \bor the ignition circuit cut-o\b\b
system to enable starting, one o\b the
\bollowing conditions must be met:
●The transmission is in the neutral
position.
●The transmission is in gear with
the clutch lever pulled and the
sidestand up.
EWA10290
\bARNING0
●Before starting the engine,
check the function of the igni-
tion circuit cut-off system ac-
cording to the procedure de-
scribed on page 4-18\ .
●Never ride with the sidestand
down.
1. Turn the key to “ON” and make sure that the engine stop switch is
set to “
I”.
XT660Z 05-07 ING-AUS:MY03 04-06 ING 11-05-2009 10:09 Pagina 5