6-33
PERIODIC MAINTENANCE AND MINOR REPAIR
6
EAU04190
Replacing the fuses
Fuses, replacing
The main fuse and the fuse box,
which contains the fuses for the indi-
vidual circuits, are located behind
panel A. (See page 6-5 for panel
removal and installation procedures.)
If a fuse is blown, replace it as fol-
lows.
1. Turn the key to “OFF” and turn
off the electrical circuit in ques-
tion.
EC000102
cC8Always keep the battery
charged. Storing a discharged
battery can cause permanent
battery damage.
8To charge a sealed-type (MF)
battery, a special (constant-
voltage) battery charger is
required. Using a conventional
battery charger will damage
the battery. If you do not have
access to a sealed-type (MF)
battery charger, have a
Yamaha dealer charge your
battery.
2. Remove the blown fuse, and
then install a new fuse of the
specified amperage.
1
1
7
3
56
4
2
1
1. Fuse box (×2) 1. Main fuse
2. Spare fuse
3. Headlight fuse
4. Ignition fuse
5. Signaling system fuse
6. Carburetor heater fuse
7. Spare fuse (×2)
Specified fuses:
Main fuse: 30 A
Headlight fuse: 15 A
Ignition fuse: 10 A
Signaling system fuse: 10 A
Carburetor heater fuse: 10 A
5JX-28199-E2 honbun 10/11/01 2:14 PM Page 63
8-4
SPECIFICATIONS
8
Battery
Type GT6B-3
Voltage, capacity 12 V, 6 Ah
Headlight typeHalogen bulb
Bulb voltage, wattage ×quantity
Headlight 12 V, 60/55 W ×1
Tail/brake light 12 V, 5/21 W ×1
Front turn signal light 12 V, 21 W ×2
Rear turn signal light 12 V, 21 W ×2
Auxiliary light 12 V, 4 W ×1
Meter lighting 12 V, 1.7 W ×1
Neutral indicator light 12 V, 1.7 W ×1
High beam indicator light 12 V, 1.7 W ×1
Turn indicator light 12 V, 1.7 W ×1
Engine indicator light 12 V, 1.7 W ×1
Fuses
Main fuse 30 A
Headlight fuse 15 A
Signaling system fuse 10 A
Ignition fuse 10 A
Carburetor heater fuse 10 A
5JX-28199-E2 honbun 10/11/01 2:14 PM Page 81