lock YAMAHA XVS650A 2001 Owners Manual

Main switch/Steering lock................................................................... 3-1
Indicator lights .................................................................................... 3-2
Speedometer ..................................................................................... 3-2
Antitheft alarm (optional) .................................................................... 3-3
Handlebar switches ............................................................................ 3-3
Clutch lever ........................................................................................ 3-5
Shift pedal .......................................................................................... 3-5
Front brake lever ................................................................................ 3-5
Rear brake pedal................................................................................ 3-6
Fuel tank cap ..................................................................................... 3-6
Fuel .................................................................................................... 3-7
Fuel tank breather hose ..................................................................... 3-7
Fuel cock ............................................................................................ 3-8
Starter (choke) “ ” .......................................................................... 3-9
Seats (for XVS650) ............................................................................ 3-9
Seats (for XVS650A) ........................................................................ 3-11
Helmet holder................................................................................... 3-12
Storage compartment ...................................................................... 3-13
Rear shock absorber adjustment ..................................................... 3-14
Luggage strap holders ..................................................................... 3-15
Sidestand ......................................................................................... 3-15
Sidestand/clutch switch operation check ......................................... 3-16
INSTRUMENT AND CONTROL FUNCTIONS
3

3-1
INSTRUMENT AND CONTROL FUNCTIONS
1
23
4
5
6
7
8
9
EAU00029
Main switch/Steering lock
The main switch controls the ignition
and lighting systems. Its operation is
described below.
EAU00036
ON
Electrical circuits are switched on. The
engine can be started. The key cannot
be removed in this position.
EAU00038
OFF
All electrical circuits are switched off.
The key can be removed in this posi-
tion.
EAU00040
LOCK
The steering is locked in this position
and all electrical circuits are switched off.
The key can be removed in this posi-
tion. To lock the steering, turn the han-
dlebars all the way to the left. While
pushing the key into the main switch,
turn it from “OFF” to “LOCK” and re-
move it. To release the lock, turn the
key to “OFF” while pushing.
EW000016
WARNING

Never turn the key to “OFF” or
“LOCK” when the motorcycle is
moving. The electrical circuits will
be switched off which may result in
loss of control or an accident. Be
sure the motorcycle is stopped be-
fore turning the key to “OFF” or
“LOCK”.
1. Push
2. Turn
EAU00044
(Parking)
The steering is locked in this position
and the taillight comes on, but all other
circuits are off. The key can be re-
moved in this position.
To use the parking position, first lock
the steering, then turn the key to “ ”.
Do not use this position for an extend-
ed length of time as the battery may
discharge.
EAU00027

3-6
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9

EAU00162
Rear brake pedal
The rear brake pedal is on the right
side of the motorcycle. Press down on
the brake pedal to apply the rear
brake.
EAU00167
Fuel tank cap
To open
Insert the key and turn it 1/4 turn clock-
wise. The lock will be released and the
cap can be opened.
To close
Push the tank cap into position with the
key inserted. To remove the key, turn it
counterclockwise to the original posi-
tion.
NOTE:

This tank cap cannot be closed unless
the key is in the lock. The key cannot
be removed if the cap is not locked
properly.
EW000023
WARNING

Be sure the cap is properly installed
and locked in place before riding
the motorcycle.

3-7
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9

1. Filler tube
2. Fuel level
EAU01183
Fuel
Make sure there is sufficient fuel in the
tank. Fill the fuel tank to the bottom of
the filler tube as shown in the illustra-
tion.
EW000130
WARNING

Do not overfill the fuel tank. Avoid
spilling fuel on the hot engine. Do
not fill the fuel tank above the bot-
tom of the filler tube or it may over-
flow when the fuel heats up later
and expands.
EAU00185
CAUTION:
Always wipe off spilled fuel immedi-
ately with a dry and clean soft cloth.
Fuel may deteriorate painted sur-

faces or plastic parts.
EAU00191
NOTE:

If knocking or pinging occurs, use a dif-
ferent brand of gasoline or higher oc-
tane grade.Recommended fuel:
Regular unleaded gasoline with
a research octane number of 91
or higher.
Fuel tank capacity:
Total:
16 L
Reserve:
3 L
1. Fuel tank breather hose
2. Guide
EAU02955
Fuel tank breather hose
This model is equipped with a fuel tank
breather hose.
Before using this motorcycle:
l
Check the fuel tank breather hose
connection.
l
Check the fuel tank breather hose
for cracks or damage and replace
it if damaged.
l
Make sure the end of the fuel tank
breather hose is not blocked and
clean it if necessary.

3-12
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
5
6
7
8
9
XVS650A

1. Seat holder
2. Projection
To install
1. Insert the projection on the front of
the seat into the holder and install
the bolt.
2. Install the passenger seat.NOTE:

Make sure that the seats are securely
fitted.
1. Helmet holder
EAU00260
Helmet holder
To open the helmet holder, insert the
key in the lock and turn it as shown. To
lock the helmet holder, replace the
holder in its original position.
EW000030
WARNING
Never ride with a helmet in the hel-
met holder. The helmet may hit ob-
jects, causing loss of control andpossibly an accident.

3-13
INSTRUMENT AND CONTROL FUNCTIONS
1
23
4
5
6
7
8
9
1. Compartment cover
2. Lock
EAU01869
Storage compartmentThe storage compartment is located
on the left side of the motorcycle.
To open
Slide the lock cover open, insert the
key in the lock and turn it clockwise.
Then, pull the storage compartment
cover out as shown.
1. Storage compartmentTo close
Place the storage compartment cover
in its original position as shown. Then,
turn the key counterclockwise and re-
move it. Close the lock cover.

3-15
INSTRUMENT AND CONTROL FUNCTIONS
1
23
4
5
6
7
8
9
1. Luggage strap holder (´ 2)
EAU01172
Luggage strap holdersThere is a luggage strap holder locat-
ed at each passenger footrest.
EAU00330
SidestandThis model is equipped with an ignition
circuit cut-off system. The motorcycle
must not be ridden when the sidestand
is down. The sidestand is located on
the left side of the frame. (Refer to
page 5-1 for an explanation of this sys-
tem.)
EW000044
WARNING
This motorcycle must not be operat-
ed with the sidestand in the down
position. If the stand is not properly
retracted, it could contact the
ground and distract the operator,
resulting in a possible loss of con-
trol. Yamaha has designed into this
motorcycle a lockout system to as-
sist the operator in fulfilling the re-
sponsibility of retracting the
sidestand. Please check carefully
the operating instructions listed be-
low and if there is any indication of
a malfunction, return the motor-
cycle to a Yamaha dealer immedi-ately for repair.

6-18
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
56
7
8
9
1. Locknut
2. Adjusting bolt
c. Free play
EAU00694
Clutch lever free play
adjustmentThe clutch lever free play should be
adjusted to 10 ~ 15 mm.
1. Loosen the locknut at the clutch
lever.
2. Turn the adjusting bolt at the
clutch lever in direction a to in-
crease free play or in direction b
to decrease free play.
3. Tighten the locknut at the clutch
lever.
1. Adjusting nut
2. LocknutIf the specified free play cannot be ob-
tained, proceed with the following
steps.
4. Loosen the locknut at the clutch
lever.
5. Turn the adjusting bolt at the
clutch lever in direction a to loos-
en the cable.
6. Loosen the locknut at the crank-
case side.
7. Turn the adjusting nut at the
crankcase in direction a to in-
crease free play or in direction b
to decrease free play.
8. Tighten the locknut at the crank-
case and the clutch lever.

6-19
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
56
7
8
9
1. Locknut
2. Adjusting bolt
EAU00696
Front brake lever free play
adjustmentThe free play at the front brake lever
should be 10 ~ 15 mm.
1. Loosen the locknut.
2. Turn the adjusting bolt in direction
a to increase free play or in di-
rection b to decrease free play.
3. After adjusting, tighten the lock-
nut.
a. Free play
EW000099
WARNING
l
Check the brake lever free play.
Be sure the brake is working
properly.
l
A soft or spongy feeling in the
brake lever can indicate the
presence of air in the brake
system. This air must be re-
moved by bleeding the brake
system before the motorcycle
is operated. Air in the system
will cause greatly diminished
braking capability and can re-
sult in loss of control and anaccident. Have a Yamaha dealer
inspect and bleed the system if
necessary.

6-20
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
56
7
8
9
a. Pedal height
b. Free play
EAU00711
Rear brake pedal height and
free play adjustment
EW000104
WARNING
It is advisable to have a Yamahadealer make this adjustment.
The brake pedal height should be ad-
justed before adjusting the brake pedal
free play.
Pedal height
The brake pedal should be positioned
approximately 85 mm above the top of
the footrest.
1. Locknut
2. Adjusting bolta. Loosen the locknut.
b. Turn the adjusting bolt in direction
a to raise pedal height or in di-
rection b to lower pedal height.
c. Tighten the locknut.
1. Adjusting nut
EW000105
WARNING
After adjusting the pedal height ad-just brake pedal free play.
Free play
The brake pedal free play should be
adjusted to 20 ~ 30 mm at the brake
pedal end. Turn the adjusting nut on
the brake rod in direction a to in-
crease free play or in direction b to
decrease free play.