light YAMAHA YD110 2005 User Guide

OPERATION AND IMPORTANT RIDING POINTS
okbZñ,eñvkbZñ Mhyj ls ijke'kZ djsaA
2.
fdlh can {ks=k esa viuh xkM+h ds batu
d¨ u r¨ dHkh LVkVZ djsa vFkok u gh
bls T;knk le; rd pyrk jgus nsaA
batu ls ckgj fudyus okyk /kq¡vk
fo"kSyk g¨rk gS rFkk Fk¨M+s le; esa gh
vopsruk vFkok e R;q dk dkj.k cu
ldrk gSA ges'kk viuh e¨Vj&lkbZfdy
d¨ i;kZIr goknkj txg ij gh LVkVZ
djsaA
3.
pyus ls igys ;g lqfuf'pr dj ysa
fd lkbM+ okyk LVSaM Åij dh v¨j
mBk gqvk g¨A lkbM+&LVSaM ds iwjh rjg
ls ihNs u gVkus ij] tc vki fdlh
d¨us ij eqM+rs gS r¨ ;g ,d xaHkhj
nq?kZVuk dk dkj.k cu ldrk gSA
Starting and warming up a cold
engineBaMs batu d¨ LVkVZ djuk rFkk
/khjs&/khjs xeZ djuk1. Turn the fuel cock to “ON”
b±/ku dh dkWd d¨ *vkWu* ds fu'kku
ij ys vk,¡A
2. Turn the main switch to “ON”
eq[; fLop d¨ *vkWu* ds fu'kku ij
yk,¡A
3. Shift the transmission into neutral.
Vªk¡leh'ku ¼xh;lZ½ d¨ *U;wVªy* esa
ifjofrZr dj ysaA
NOTE :When the transmission is in neutral,
the neutral indicator light should be
on. If the light does not come on, ask
a YMI dealer to insect it.u¨V%&
tc Vªk¡leh'ku ÞU;wVªy&voLFkkß esa g¨ r¨
U;wVªy dh baMhdsVj ykbV Hkh tyuh pkfg,A
;fn ykbV ugh tyrh gS r¨ okbZñ,eñvkbZñ
Mhyj ls bldh tk¡p djus d¨ dgsaA4. Fully press down Choke Lever and
completely close the throttle grip.
pkWd yhoj d¨ Bhd rjg ls uhps dh
v¨j iwjh rjg ls nck,¡ rFkk FkzkWVy&fxzi
d¨ can dj nsaA
5. Kick the kick starter to start the
engine.
batu d¨ LVkVZ djus ds fy,
fdd&LVkVZj ij fdd yxk,¡A
6. Ride your Motorcycle with choke
remaining in “ON” position for
some distance*
Fk¨M+h nwjh rd pkWd d¨ *vkWu* dh voLFkk esa
j[krs gq, viuh e¨Vj&lkbZfdy d¨ pyk,¡A

WARNING
1. Before riding this Motorcycle,
become thoroughly familiar with
all operating controls and their
functions. Consult a YMI dealer
regarding any control or function
that you do not thoroughly
understand.
2. Never start your engine or let it
run for any length of time in a
closed area. The exhaust fumes
are poisonous and can cause
loss of consciousness and
death within a short time.
Always operate you Motorcycle
in an area with adequate
ventilation.
3. Before starting out, always be
sure the side stand is up. Failure
to retract the side stand
completely can result in a
serious accident when you try
to turn a corner. psrkouh1.
bl e¨Vj&lkbZfdy d¨ pykus ls igys
blds lHkh dk;Z&laca/kh fu;a=k.kksa rFkk
muds mi;¨x¨a ls ifjfpr g¨ ysaA fdlh
fu;a=k.k vFkok mi;¨x ds iwjh rjg ls
le> esa u vkus ij bl laca/k esa ,d
5.1
dk;Z rFkk lokjh ls tqM+s vko';d rF;
PG1_55.pmd2/25/2005, 10:04 AM 32

OPERATION AND IMPORTANT RIDING POINTS
u¨V%&
vxj b±tu LVkZVj yhoj ds can jgus
ij ¼*Åij^ dh fn'kk es½ aFkzkWVy }kjk
lkekU; izfrfØ;k djrk gS rks b±tu xeZ
gSA
Starting a warm engine.Fk¨M+k xeZ gq, batu dk LVkVZ djukAThe Choke Lever may not be
required when the engine is warm.tc batu dqN xeZ g¨ tk, r¨ *pksd
yhoj^ dh vko';drk ugh jg tkrh gSA CAUTION :See the “Running-in” section prior to
operating the Motorcycle for the first
time. lko/kkuh %
igyh ckj ç;¨x djus ls igys *jfuax bu^
[kaM ij /;ku nsaA
(*The distance will vary as per the
climatic conditions of your area.)¼;g nwjh vkids {ks=k ds okrkoj.k ij
fuHkZj gSA½
7. Lift Choke Level to “OFF” position
immediately after the Engine is
warm.
batu ds xeZ g¨us ds rqjar ckn gh
Þpksd yhojß d¨ *vkWQ* ds fu'kku ij
ys tk;saA
NOTE :
For better engine performance
always warm up the engine. Before
take off. Never open throttle fully
when engine is cold, otherwise
engine tends to stop.u¨V %&
pyus ls igys] batu dh csgrj dk;Z&{kerk
ds fy, ges'kk bls /khjs&/khjs xeZ djsaA
dHkh Hkh tc batu BaMk g¨ r¨ FkzkWVy d¨
iwjh rjg ls u [k¨ys] vU;Fkk batu can gks
ldrk gSANOTE :
The engine is warm when it
responds normally to the throttle with
the Starter Lever in UP direction.
1. Shift pedal
f'k¶V&iSMy
2. Neutral
U;wVªy
Shifting
f'k¯¶Vx
The transmission lets you control
the amount of power you have
available at a given speed for
starting, accelerating, climbing hills,
etc. The use of the shift pedal is
shown in the illustration.Vªkaleh'ku }kjk 'kfDr dh ml ek=kk ij
vki fu;a=k.k j[krs gS t¨ 'kq# esa] rst xfr
esa rFkk Å¡pkbZ esa p<+us bR;kfn ds le;
,d nh xbZ xfr ij miyC/k g¨rh gSA
f'k¶V&iSMy dk ç;¨x fp=k esa n'kkZ;k
x;k gSATo shift into neutral, depress the shift
pedal repeatedly until it reaches the
end of its travel, then raise the pedal
slightly.
5.2
dk;Z rFkk lokjh ls tqM+s vko';d rF;
PG1_55.pmd2/25/2005, 10:04 AM 33

OPERATION AND IMPORTANT RIDING POINTS
Tips for reducing fuel
consumptionb±/ku dh [kir de djus ds fVIlYour Motorcycle’s fuel consumption
depends to a large extent on your
riding style.vkidh e¨Vj&lkbZfdy esa b±/ku dh [k+ir]
vkids pykus ds rjhds ij fuHkZj djrh gSAThe following tips can help reduce fuel
consumption :uhps fn, x, fVIl ¼fof/k;k¡½ b±/ku dh [k+ir
d¨ de djus esa lgk;d g¨ ldrs gS
:
1. Warm up the engine before riding.
e¨Vj&lkbZfdy pykus ls igys batu
d¨ FkksM+k xeZ djsaA
2. Lift up the Choke Lever as soon
as possible.
ftruh tYnh laHko g¨ *pkWd yhoj^ d¨
Åij dh rjQ mBk ysaA
3. Shift up swiftly and avoid high
engine speeds during
acceleration.
e¨Vj&lkbZfdy dh xfr c<+us ds n©jku
xh;j rst+h ls cnys rFkk batu dh rst+
LihM+ ls cpsaA
4. Do not double-clutch or rev the
engine while shifting down and
avoid high engine speeds with
no load on the engine.
xkM+h d¨ fupys xh;j esa ykrs le;
Mcy Dyp dk ç;¨x u djsaA rFkk
batu ij y¨M u g¨us dh fLFkfr esa
batu ds rhoz osx ls cpsaA
5. Turn off the engine instead of
letting it idle for an extended
length of time, i.e. in traffic jams,
at traffic lights or rail-road
crossings.
tc vki T;knk nsj rd [kM+s gks rks
batu dk vkbZMy ij pyrs jgus dh
vis{kk mls can dj nsaA
mnkgj.k% VªSfQd tke esa]yky cÙkh
ij] jsyos Øk£lx ij bR;kfnA
6. Do not drive with excessive load
on the Motorcycle.
vR;kf/kd ot+u ds lkFk
e¨Vj&lkbZfdy u pyk,¡A
7. Plan your route in advance.
vius ;k=kk&ekxZ dh ;¨t+uk igys ls
gh cuk ysaA
8. Avoid frequent braking.
ckj&ckj czsd yxkus ls cpsaA
9. Always maintain your tyre
pressure as per
recommendation.
tSlk fd çLrkfor ¼flQkfj'k½ fd;k
x;k gS] ges'kk vius Vk;j esa gok ds
ncko d¨ cuk dj j[¨saA
10.Get your motorcycle serviced
periodically after every 2000 kms.
çR;sd
2000
fdñehñ ds varjky esa
lkef;d #i ls e¨Vj&lkbZfdy dh
lfoZl djok,¡A
Running-in
jfuax&bu
There is never a more important period
in the life of your Motorcycle than the
period between zero and 1,000 km.
For this reason we ask that you
carefully read the following material.
Because the engine is brand new, you
must not put an excessive load on it
for the first 1,000 km. The various
parts in the engine wear and polish
themselves to the correct operating
clearances. During this period,
prolonged full throttle operation, or any
condition which might result in
excessive heating of the engine, must
be avoided.
5.4
dk;Z rFkk lokjh ls tqM+s vko';d rF;
PG1_55.pmd2/25/2005, 10:04 AM 35

1. Spark plug gap
LikdZ Iyx dk xSi
Spark plug inspection
LikdZ Iyx dk fujh{k.kThe spark plug is an important
engine component and is easy to
inspect. The condition of the spark
plug can indicate the condition of the
engine. The ideal color on the white
insulator around the center electrode
is a medium-to-light tan color for a
Motorcycle that is being ridden
Normally. Do not attempt to diagnose
any problems yourself. Instead, take
the Motorcycle to a YMI dealer. You
should periodically remove and
inspect the spark plug because heat
and deposits will cause the spark
plug to slowly break down and erode.
If electrode erosion becomes
excessive, or if carbon and otherBefore installing the spark plug,
measure the electrode gap with a
wire thickness gauge; adjust the gap
to specification as necessary.
LikdZ Iyx yxkus ds igys bysDVª¨M ds(xSi
) d¨ ok;j xst }kjk uki yasA tSlk
Hkh vko';d g¨ bl varj d¨ fu£n"Vuqlkj
(o£.kr&fof/k
) ls O;ofLFkr djsA
,-&LikdZ Iyx dk varj:
0.9feñehñ
(-0.2 feñehñ
)
When installing the plug, always
clean the gasket surface and use a
new gasket. Wipe off any grime from
the threads and tighten the spark
plug to the specified torque.Iyx yxkrs le; ges'kk xSlfdV ds ry
d¨ lkQ djs rFkk u;k xSlfdV yxk;saA
rarqv¨
(FkzSM~l
) ij yxh xanxh d¨ i¨aN Mkysa
v©j bls fu£n"V VkdZ rd dl nsA
Specified spark plug
fu£n"V fd;k x;k LikdZ Iyx %
P-RA7HC (Champion)
6.9A-Spark plug gap: 0.9mm(-0.2 mm)
deposits are excessive, you should
replace the spark plug with the
specified plug.LikdZ Iyx batu dk egÙoiw.kZ iqtkZ gS
rFkk bldh tk¡p djuk cgqr t#jh gSA
LikdZ Iyx dh fLFkfr ls batu dh gkyr
dk irk yxk;k tk ldrk gSA chp dh
bysDVª¨M ds pkj¨ rjQ lQsn balqysVj ds
Åij vkn'kZ jax] e/;e&gYdk Hkwjk gS t¨
;g n'kkZrk gS fd e¨VjlkbZfdy d¨
lkekU;r% lgh rjhds ls pyk;k tk jgk
gSA fdlh çdkj dh leL;kv¨a dk funku
djus ds fy, Lo;a ç;Ru u djsaA
e¨VjlkbZfdy d¨ okbZñ,eñvkbZñ Mhyj ds
ikl ys tk,¡A vkid¨ le;≤ ij
Iyx ckgj fudky dj mldh tk¡p djrs
jguk pkfg,] D;¨afd Å"ek rFkk tes gq,
d.k /khjs&/khjs LikdZ Iyx dh dk;Z&izzzzzzzðfr
d¨ [kjkc dj nsrs gS v©j bls u"V dj nsrs
gSA ;fn bysDVª¨M dk fljk
(Åij dk
fgLlk
) cgqr T;knk [kjkc g¨ tkrk gS
vFkok bl ij dkcZu rFkk nwljs tek d.kks
dh vf/kdrk c<+ tkrh gS r¨ vkid¨ bl
*LikdZ Iyx^ d¨ fu£n"V fd, x, Iyx ls
cny nsuk pkfg,A
PERIODIC MAINTENANCE AND MINOR REPAIR
lkef;d j[kj[kko rFkk ekewyh ejEer
PG1_55.pmd2/25/2005, 10:04 AM 45

1. Engine oil filter cap
batu vkW;y fQYVj dSi
Engine oilbatu dk rsy1. Oil level measurement
rsy ds Lrj dks ukiukA
a. Place the Motorcycle on the
centerstand. Warm up the engine
for several minutes., - e¨VjlkbZfdy d¨ lSaVj LVSaM ij [kM+k
dj nsaA batu d¨ dbZ feuV¨a rd /
khjs&/khjs xeZ djsaA
1. Maximum level
mPpre Lrj
2. Minimum level
fuEure Lrj
NOTE :Wait a few minutes until the oil level
settles before checking.u¨V %tk¡p djus ls igys tc rd vWk;y dk
Lrj ¼ysoy½ fLFkj u g¨ tk, rc rd
dqN feuV¨a ds fy, çrh{kk djsA
NOTE :
Be sure the Motorcycle is positioned
straight up when checking the oil
level. A slight tilt toward the side can
result in false readings.u¨V %;g lqfuf'pr djs fd rsy dk Lrj ns[krs
le; e¨Vj&lkbZfdy viuh txg ij lh/kh
[kM+h jgsA ,d rjQ d¨ Fk¨M+k lk Hkh
>qdko jgus ls jh¯Mx xyr g¨ ldrh gSA
ALWAYS CHANGE ENGINE OIL AT RECOMMENDED INTERVALS
FOR OPTIMUM ENGINE PERFORMANCE AND ENGINE LIFE
6.11
PERIODIC MAINTENANCE AND MINOR REPAIR
lkef;d j[kj[kko rFkk ekewyh ejEer
PG1_55.pmd2/25/2005, 10:04 AM 47

1. Adjusting Nut
,Mt¯LVx uV
Rear brake adjustment
fiNyh czsd dh ,MtLVesaVThe rear brake pedal free play
should be adjusted to 20 ~ 30 mm
at the brake pedal end. Turn the
adjusting nut in direction ç to
increase free play and in direction
è to decrease free play.czsd iSMy ds fdukjs ij fiNys czsd iSMy
dh Ýh Iys ¼ 20
ls
30
feñehñ
rd ,MtLV djuh pkfg,A Ýh Iys
¼ uV d¨ , dh fn'kk esa ?kqek,¡ v©j Ýh Iys
¼ ch dh fn'kk esa ?kqek,¡A
a. Freeplay
Ýh Iys

WARNING• When it is impossible to make
the proper adjustment, ask a
YMI dealer.
 Check the operation of the
brake light after adjusting the
rear brake. psrkouh
tc lgh rjhds ls lkaetL;
¼,MtLVesaV½ LFkkfir djuk vlaHko
yx jgk g¨ r¨ okbZñ,eñvkbZñ Mhyj
ls ijke'kZ djsaA

fiNyh czsd d¨ ,MtLVesaV djus ds
ckn czsd ykbV dh çfØ;k dh tk¡p
djsaA
6.23
3. Tighten the locknut.
ykWd uV d¨ dl nsaA
WARNINGWhen it is impossible to make the
proper adjustment, ask a YMI
dealer psrkouh;fn lgh rjhds ls ,MtLVesaV djuk
vlaHko yx jgk g¨ r¨ okbZñ,eñvkbZñ Mhyj
ls ckr djsaA
PERIODIC MAINTENANCE AND MINOR REPAIR
lkef;d j[kj[kko rFkk ekewyh ejEer
ç
è
1ç
pg56_96.pmd2/25/2005, 9:59 AM 59

1. Wear limit line
oh;j fyfeV ykbu
2. Wear indicator
oh;j baMhdsVj
Checking the brake shoes
czsd 'kwt+ dh tk¡pA wear indicator is provided on each
brake. This indicator allows
inspection of shoe wear without
disassembling the brake. Apply the
brake and inspect the position of the
indicator reaches to the wear limit
line, ask a YMI dealer to replace the
shoes.gj ,d czsd ds fy, ,d oh;j&baMhdsVj
yxk;k x;k gSA ;g bafMdsVj czsd d¨ fcuk
[k¨ys gq,] czsd 'kwW dh tk¡p esa lgk;d g¨rk
gSA czsd yxk,¡ v©j baMhdsVj dh voLFkk
dk fujh{k.k djsaA ;fn baMhdsVj oh;j dh
lhek&js[kk rd igq¡p tkrk gS r¨
okbZñ,eñvkbZñ Mhyj ls bu 'kwt+ d¨ cnyrs
d¨ dgsaA
1. Brake light switch
czsd ykbV dk fLop
2. Adjusting nut
,Mt¯LVx uV
Brake light switch adjustment
czsd ykbV ds fLop dh ,MtLVesaVThe rear brake light switch is
activated by the brake pedal and is
properly adjusted when the brake
light comes on just before braking
takes effect. To adjust the rear brake
light switch, hold the switch body so
it does not rotate while turning the
adjusting nut.
Turn the adjusting nut in direction ç
to make the brake light come on
earlier.
Turn the adjusting nut in direction è
to make the brake light come on later.
fiNyh czsd dh ykbV dk fLop ¼cVu½
czsd iSMy ls fØ;kfUor g¨rk gS v©j bl
rjg ls ,MtLV fd;k tkrk gS fd czsd
yxus dk çHkko fn[kus ls igys gh czsd dh
cÙkh ¼ykbV½ ty mBrh gSA fiNyh czsd
ds cVu ¼fLop½ d¨ ,MtLV djus ds fy,
fLop d¨ bl rjg ls idMsa rkfd
,Mt¯LVx uV d¨ [k¨yrs le; fLop ?kwe
u ldsA
czsd ykbV d¨ 'kh?kzrk ls igys tykus ds
fy, ,Mt¯LVx uV d¨ , dh fn'kk esa
?kqek,¡A
czsd ykbV d¨ ckn esa tykus ds fy,
,Mt¯LVx uV d¨ ch dh fn'kk esa ?kqek,¡A
6.24
PERIODIC MAINTENANCE AND MINOR REPAIRlkef;d j[kj[kko rFkk ekewyh ejEer
ç
è1
2
21
pg56_96.pmd2/25/2005, 9:59 AM 60

1. Cotter pin
dkWVj fiu
6. Insert a new cotter pin into the axle
nut and bend the end of the cotter
pin as shown. If the notch in the
axle nut and the cotter pin hole do
not match, tighten the nut slightly
to align them.
,fDly ds uV esa ,d u;k dkWVj fiu
yxk,¡] v©j tSlk fd fp=k esa fn[kk;k
x;k gS] dkWVj fiu ds ,d fljs d¨ e¨M+
nsaA ;fn ,fDly uV dh u¨ad ¼ukWp½
rFkk dkWVj&fiu ds usd ds lkFk fey
ugh ikrh gS r¨ bUgs vkil esa feykus ds
fy, uV d¨ /khjs&/khjs dlsaA
WARNINGAlways use a new cotter pin on the
axle nut.
lko/kkuh %
psu dh f'kfFkyrk d¨ fo'ks"k #i ls
of.kZr fufnZ"V dh xbZ lhekv¨a esa gh
çfrikfnr ¼esauVsau½ djsaA

,fDly dh lgh ,ykbuesaV çfrikfnr
djus ds fy, ;g lqfuf'pr djsa fd
,MtLVj ij yxk gqvk fu'kku ckb±
rFkk nkb± v¨j ls ,d gh fpUg ¼fu'kku½
ij feyrh gSA
5. After adjusting, be sure to
tighten each chain adjusting
locknut. Then tighten the axle
nut to the specified torque.
,MtLVesaV djus ds ckn gj ,d psu
,Mt¯LVx ykWd uV d¨ vo'; dl
nsaA rRi'pkr~ ,fDly uV d¨ fu£n"V
VkdZ rd dl nsaA
Tightening torque
dlk x;k VkdZ
:
Axle nut
,fDly uV %
65 ft-lb (9.05 m-kg)
"kV~&isap ¼gsDl&LØ;w½ d¨ , dh fn'kk
esa ?kqek,¡ rFkk bls ,Mt¯LVx "kV~&isap ¼gsDl&LØ;w½ d¨
ch dh fn'kk esa ?kqek,¡ v©j ifg, ij
vkxs dh v¨j ncko MkysA ,Dly dh
lgh ,ykbuesaV ¼iafDrcðrk½ d¨
çfrikfnr ¼esauVsau½ djus ds fy, çR;sd
psu ,Mt¯LVx "kV&isap ¼gsDl&LØ;ww½
d¨ Bhd rjg ls leku nwjh rd
?kqek,¡A çR;sd psu iqyj ij fu'kku
yxs gq, gSA fiNys ifg, d¨ lgh
rjg ls yxkus ds fy, bu fpUg¨ dk
ç;¨x djsaA
CAUTION : Maintain chain slackness
within specified limits as per
specifications.
 To maintain correct axle
alignment, Ensure the notch
on the adjuster is on the same
Mark on Left and Right
Side.
6.27
PERIODIC MAINTENANCE AND MINOR REPAIR
lkef;d j[kj[kko rFkk ekewyh ejEer
pg56_96.pmd2/25/2005, 9:59 AM 63

psrkouh
,fDly uV ds fy, ges'kk u, dkWVj fiu
dk gh ç;¨x djsaA7. Adjust the free play in the brake
pedal.
czsd iSMy ds Ýh Iys d¨ ,MtLV
djsaA
p
WARNINGCheck the operation of the brake
light after adjusting the rear brake. psrkouhfiNyh czsd d¨ ,MtLV djus ds ckn
czsd dh cÙkh ¼ykbV½ dh çfØ;k d¨ tk¡p
ysaA
6.28
Drive chain lubricationMªkbo&psu dh Y;wczhds'kuThe chain consists of many parts
which work with each other. If the
chain is not maintained properly, it
will wear out quickly. Therefore, the
chain must be serviced regularly.
This service is especially
necessary when riding in dusty
areas.psu esa cgqr ls fgLls g¨rs gS t¨ ,d&nwljs
ds fy, dke djrs gSA ;fn psu dh
ns[kHkky lgh rjg ls u dh tk, r¨ ;g
tYnh f?kl tkrh gSA blfy, yxkrkj
bldh l£ol dk /;ku j[kuk pkfg,A
jsrhys bykd¨ esa e¨Vj&lkbZfdy pykrs
le; bl rjg dh l£ol djkuk cgqr
t#jh g¨ tkrk gSA1. The drive chain should be
lubricated every 5,000 km.
Mªkbo&psu d¨ çR;sd
5,000
fdñehñ
ds ckn Y;wczhdsV dj nsuh pkfg,A
2. To clean the chain thoroughly,
remove it from the Motorcycle,
dip it in solvent, and clean outas much dirt as possible.
Then, take the chain out of the
solvent to dry it, and then dip
the chain in oil of 20W40.
Remove the chain and hang it
on a peg for a while till the
excess oil drips down
completely. Then using a clean
cloth wipe the chain.
psu d¨ iw.kZr;k lkQ djus ds fy,
bls e¨Vj&lkbZfdy ls mrkj ysa] ækod
¼lkWyosaV½ esa Mqc¨ nsa v©j ftruk T;knk
laHko g¨ /kwy&feêh d¨ lkQ dj ysaA
mlds ckn psu d¨ lq[kkus ds fy,
ækod ls ckgj fudky ysa v©j fQj ls20W40
czkaM ds ¼vkW;y½ rsy esa iwjh
fHkx¨ nsaA rRi'pkr~ psu d¨ ckgj
fudky dj rc rd [kq¡Vh ij Vk¡x nsa]
tc rd fd Qkyrw rsy blesa ls iwjh
rjg fupqM+ u tk,A rc psu d¨ ,d
lkQ diM+s ls i¨aN ysaA
PERIODIC MAINTENANCE AND MINOR REPAIRlkef;d j[kj[kko rFkk ekewyh ejEer
pg56_96.pmd2/25/2005, 9:59 AM 64

1. Bulb holder cover
cYc gksYMj dk doj
Headlight bulb replacementgSM ykbZV ds cYc dks cnyukIf the headlight bulb burns out,
replace the bulb as follows;fn gSM ykbZV dk cYc [kjkc gks tkrk gS
rks bls uhps nh xbZ fof/k ls cny nsa %1. Remove the two screws from
the bezel assy of the headlight.
ct+y vlsEcyh ds nks isapks dks [kksy
dj gVk ysaA
2. Unscrew the bulb holder from
reflector assy.
cYc gksYMj dks fjQysDVj&vlsEcyh
esa ls [kksydj fudky ysaA
CAUTION :Do not use fuse of higher
amperage rating than those
recommended. Substitution of a
fuse of improper rating can
cause extensive electrical
system damage and possibly a
fire. lko/kkuh %izLrkfor fd;s x;s ¶;wt+ ds vfrfjDr]
dksbZ nwljk mPp ,aih;j ek=kk dk ¶;wt+
iz;ksx u djsaA fodYi ds :i esa vuqfpr
ek=kk dk ¶;wt+ fctyh ds foLr r iz.kkyh
dks uqdlku igqapk ldrk gS vkSj laHkor%
blls vkx Hkh yx ldrh gSA
Specified fuse
fufnZ"V fd;k x;k ¶;wt
: 10A
+
;fn ¶;wt+ mM+ x;k gks] rks eSu fLop dks
?kqekdj can dj nsa vkSj l£dV dks tk¡p
ds fy, can dj nsaA leqfpr ^,Eih;j* dk
u;k ¶;wt yxk;saA cVuksa dk ?kqek,a vkSj
ns[ksa fd D;k fctyh ds lalk/ku Bhd rjg
ls dke dj jgs gSaA ;fn rqjar ¶;wt+ fQj
ls mM+ tkrk gS rks okbZñ,eñvkbZñ Mhyj ls
fQj ls lEidZ djsaA
PERIODIC MAINTENANCE AND MINOR REPAIR
lkef;d j[kj[kko rFkk ekewyh ejEer
6.37
1
pg56_96.pmd2/25/2005, 9:59 AM 73