lights YAMAHA YFM600FWA 2001 Manuale de Empleo (in Spanish)

EBU00015
CONTENTS
LOCATION OF THE WARNING AND
SPECIFICATION LABELS ....................... 1-1
SAFETY INFORMATION ........................ 2-1
DESCRIPTION AND MACHINE
IDENTIFICATION .................................... 3-1
Identification number records ........... 3-3
Key identification number ................. 3-5
Vehicle identification number ........... 3-5
Model label ......................................... 3-7
CONTROL FUNCTIONS ......................... 4-1
Main switch......................................... 4-1
Indicator lights .................................... 4-3
Oil temperature warning light
checking method .............................. 4-5
Speedometer .................................... 4-11
Fuel gauge ........................................ 4-11
Handlebar switches .......................... 4-13
Throttle lever .................................... 4-19
Speed limiter .................................... 4-21
Front brake lever .............................. 4-23Rear brake pedal and lever.............. 4-25
Parking brake .................................... 4-27
Drive select lever .............................. 4-29
Recoil starter..................................... 4-29
Fuel tank cap..................................... 4-31
Fuel cock ........................................... 4-33
Starter (choke) “ ” ........................ 4-35
Seat ................................................... 4-37
Storage box ...................................... 4-39
Front carrier ...................................... 4-39
Rear carrier ....................................... 4-39
Rear shock absorber
adjustment...................................... 4-41
Auxiliary DC connector .................... 4-43
PRE-OPERATION CHECKS .................... 5-1
Front and rear brakes......................... 5-7
Fuel .................................................... 5-11
Engine oil .......................................... 5-15
Final gear oil/Differential
gear oil ............................................ 5-19
Throttle lever .................................... 5-19
Fittings and Fasteners...................... 5-21
Lights................................................. 5-211
2
3
4
5

2-15
WARNING
●Always turn off the engine when refuel-
ing.
●Do not refuel right after the engine has
been running and is still very hot.
●Do not spill gasoline on the engine or ex-
haust pipe/muffler when refueling. Never
refuel while smoking, or while in the vi-
cinity of sparks, open flames, or other
sources of ignition such as the pilot lights
of water heaters and clothes dryers. Gas-
oline can catch fire and you could be
burned.
●When transporting the machine in anoth-
er vehicle, be sure it is kept upright and
that the fuel cock is in the “OFF” position.
Otherwise, fuel may leak out of the carbu-
retor or fuel tank.
●Gasoline is poisonous. If you should swal-
low some gasoline or inhale a lot of gaso-
line vapor, or get some gasoline in your
eyes, see your doctor immediately. If gas-
oline spills on your skin, wash with soap
and water. If gasoline spills on your cloth-
ing, change your clothes.

4-3
1. Four-wheel drive indicator light “4WD”
2. Reverse indicator light “REVERSE”
3. Neutral indicator light “NEUTRAL”
4. Oil temperature indicator light “OIL TEMP”
1. Témoin 4 × 4 “4WD”
2. Témoin de marche arrière “REVERSE”
3. Témoin de point mort “NEUTRAL”
4. Témoin d’avertissement de la température d’huile “OIL TEMP”
1. Luz de control del modo de tracción de cuatro
ruedas “4WD”
2. Luz de control de marcha atrás “REVERSE”
3. Luz de control de punto muerto “NEUTRAL”
4. Luz de aviso de la temperatura del aceite “OIL TEMP”
EBU00043
Indicator lights
EBU00044
Reverse indicator light “REVERSE”
This indicator light comes on when the trans-
mission is in reverse.
EBU00045
Neutral indicator light “NEUTRAL”
This indicator light comes on when the trans-
mission is in neutral.
EBU00732
Oil temperature warning light “OIL TEMP”
When the oil temperature reaches a specified
level, this light comes on to warn that the en-
gine oil temperature is too hot. If the warning
light comes on during operation, stop the en-
gine as soon as it is safe to do so and allow the
engine to cool down for about 10 minutes.
CAUTION:
●The engine may overheat if the ATV is
overloaded. If this happens, reduce the
load to specification.
●Restart after making sure that the warn-
ing light is out. Continuous use while the
warning light is on may cause damage to
the engine.

4-13
1. Lights switch “LIGHTS”
2. Engine stop switch “ENG. STOP”
3. Start switch “START”
4. Horn switch “ ”
1. Contacteur d’éclairage “LIGHTS”
2. Coupe-circuit du moteur “ENG. STOP”
3. Contacteur du démarreur “START”
4. Contacteur de l’avertisseur “ ”
1. Interruptor de luces “LIGHTS”
2. Interruptor de paro del motor “ENG. STOP”
3. Interruptor de arranque “START”
4. Interruptor de la bocina “ ”
EBU00053
Handlebar switches
EBU00054
Engine stop switch “ENG. STOP”
Make sure that the engine stop switch is in the
“RUN” position. The engine stop switch con-
trols ignition and can be used at all times to
stop the engine, especially in an emergency.
The engine will not start or run when the en-
gine stop switch is turned to “OFF”.
EBU00647
Start switch “START”
The starter motor cranks the engine when this
switch is pushed.
CAUTION:
See the starting instructions on page 6-3 prior
to starting the engine.

4-15
1. Lights switch “LIGHTS”
2. Engine stop switch “ENG. STOP”
3. Start switch “START”
4. Horn switch “ ”
1. Contacteur d’éclairage “LIGHTS”
2. Coupe-circuit du moteur “ENG. STOP”
3. Contacteur du démarreur “START”
4. Contacteur de l’avertisseur “ ”
1. Interruptor de luces “LIGHTS”
2. Interruptor de paro del motor “ENG. STOP”
3. Interruptor de arranque “START”
4. Interruptor de la bocina “ ”
EBU00734
Light switch “LIGHTS”
Turn the switch to the “LO” position to switch
on the low beam and the taillight.
Turn the switch to the “HI” position to switch
on the high beam and the taillight.
Turn the switch to the “OFF” position to switch
off the headlight and the taillight.
CAUTION:
Do not use the headlight with the engine
turned off for more than thirty minutes. The
battery may discharge to the point that the
starter motor will not operate properly. If this
should happen, remove the battery and re-
charge it.
EBU00059
Horn switch “ ”
Press the switch to sound the horn.

4-16
FBU00734
Contacteur d’éclairage “LIGHTS”
Tourner le contacteur à la position “LO” pour allumer le
feu de croisement et le feu arrière.
Tourner le contacteur à la position “HI” pour allumer le
feu de route et le feu arrière.
Placer le contacteur sur “OFF” pour éteindre le phare et
le feu arrière.
ATTENTION:ATTENTION:ATTENTION:ATTENTION:
Ne jamais laisser le phare allumé pendant plus d’une
demi-heure après avoir coupé le moteur. La batterie
risque de se décharger au point d’empêcher la mise
en marche du moteur. Si cela devait se produire, dé-
poser et recharger la batterie.
FBU00059
Contacteur de l’avertisseur “ ”
Appuyer sur ce contacteur pour actionner l’avertisseur.
SBU00734
Interruptor de luces “LIGHTS”
Gire el interruptor a la posición “LO” para encen-
der la luz de cruce del faro y la luz trasera.
Gire el interruptor a la posición “HI” para encen-
der la luz de carretera del faro y la luz trasera.
Gire el interruptor a la posición “OFF” para apa-
gar el faro y la luz trasera.
ATENCION:
No mantenga el faro encendido durante más de
treinta minutos con el motor parado. La batería
podría descargarse hasta el extremo de que el
motor de arranque no funcione debidamente. Si
sucediese esto, desmonte la batería y recárgue-
la.
SBU00059
Interruptor de la bocina “ ”
Para hacer sonar la bocina pulse este interrup-
tor.

5-1
EBU00113
PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Front brake• Check operation, free play, fluid level and fluid leakage.
• Fill with DOT 4 (or DOT 3) brake fluid if necessary.5-7 ~ 5-9,
8-51 ~ 8-67
Rear brake• Check operation and free play.
Fuel• Check fuel level.
• Fill with fuel if necessary.5-11 ~ 5-13
Engine oil• Check oil level.
• Fill with oil if necessary.5-15 ~ 5-17,
8-15 ~ 8-23
Final gear oil/
Differential gear oil• Check for leakage. 5-19, 8-25 ~ 8-33
Throttle• Check for proper throttle cable operation. 5-19, 8-49
Wheels and tires• Check tire pressure, wear and damage.5-23 ~ 5-29,
8-71 ~ 8-73
Fittings and Fasteners• Check all fittings and fasteners. 5-21
Lights• Check for proper operation. 5-21, 8-83
Front axle boots• Check for damage. 8-33

5-21
EBU00152
Fittings and Fasteners
Always check the tightness of chassis fittings
and fasteners before a ride. Take the machine
to a Yamaha dealer or refer to the Service Man-
ual for correct tightening torque.
EBU00153
Lights
Check the headlight and taillight to make sure
they are in working condition. Repair as neces-
sary for proper operation.
EBU00155
Switches
Check the operation of the headlight switch,
engine stop switch and any other switches. Re-
pair as necessary for proper operation.

8-85
EBU00413
Troubleshooting
Although Yamaha machines receive a rigid in-
spection before shipment from the factory,
trouble may occur during operation.
Any problem in the fuel, compression, or igni-
tion systems can cause poor starting and loss
of power. The troubleshooting chart describes
a quick, easy procedure for making checks. If
your machine requires any repair, take it to a
Yamaha dealer.
The skilled technicians at a Yamaha dealership
have the tools, experience, and know-how to
properly service your machine. Use only genu-
ine Yamaha parts on your machine. Imitation
parts may look like Yamaha parts, but they are
often inferior. Consequently, they have a short-
er service life and can lead to expensive repair
bills.
WARNING
Do not smoke when checking the fuel system.
Fuel can ignite or explode, causing severe inju-
ry or property damage. Make sure there are no
open flames or sparks in the area, including pi-
lot lights from water heaters or furnaces.