brake light YAMAHA YFZ450 2005 Owners Manual

EBU00150
1-CONTENTS
LOCATION OF THE WARNING
AND SPECIFICATION LABELS .............. 1-1
SAFETY INFORMATION ......................... 2-1
DESCRIPTION AND MACHINE
IDENTIFICATION .................................... 3-1
Identification number records ............... 3-3
Key identification number ..................... 3-5
Vehicle identification number ............... 3-5
Model label ........................................... 3-7
CONTROL FUNCTIONS ......................... 4-1
Main switch........................................... 4-1
Indicator and warning lights.................. 4-3
Handlebar switches .............................. 4-7
Throttle lever ...................................... 4-11
Speed limiter ...................................... 4-13
Clutch lever ........................................ 4-15
Brake lever ......................................... 4-17
Brake pedal ........................................ 4-17
Parking brake lever ............................ 4-19
Shift pedal .......................................... 4-21
Fuel tank cap ...................................... 4-21
1234
Fuel cock............................................ 4-23
Starter (choke) .................................. 4-25
Seat.................................................... 4-27
Front shock absorber adjustment ...... 4-29
Rear shock absorber adjustment ....... 4-39
PRE-OPERATION CHECKS ................... 5-1
Front and rear brakes .......................... 5-5
Fuel ...................................................... 5-9
Engine oil ........................................... 5-13
Coolant............................................... 5-15
Chain.................................................. 5-17
Throttle lever ...................................... 5-17
Fittings and fasteners......................... 5-19
Lights ................................................. 5-19
Switches............................................. 5-19
Tires ................................................... 5-21
How to measure tire pressure ............ 5-25
Tire wear limit..................................... 5-27
5
U5TG61.book Page 1 Friday, April 2, 2004 11:28 AM

OPERATION ............................................6-1
Starting a cold engine ...........................6-3
Starting a warm engine .........................6-9
Warming up...........................................6-9
Shifting ................................................6-11
To start out and accelerate .................6-13
To decelerate ......................................6-17
Engine break-in ...................................6-19
Parking ................................................6-23
Parking on a slope ..............................6-25
Accessories and loading .....................6-29
RIDING YOUR ATV..................................7-1
Getting to know your ATV .....................7-3
Ride with care and good judgement .....7-5
Be careful where you ride ...................7-27
Turning your ATV ................................7-41
Climbing uphill.....................................7-47
Riding downhill ....................................7-57
Crossing a slope .................................7-61
Crossing through shallow water ..........7-65
Riding over rough terrain ....................7-69
Sliding and skidding ............................7-71
What to do if ........................................7-75
What to do...........................................7-75
67
PERIODIC MAINTENANCE AND
ADJUSTMENT ......................................... 8-1
Owner’s manual and tool kit ................. 8-3
Periodic maintenance/lubrication.......... 8-7
Panel removal and installation............ 8-17
Engine oil and oil filter element........... 8-23
Cooling system ................................... 8-41
Changing the coolant.......................... 8-45
Spark plug inspection ......................... 8-53
Air filter element cleaning ................... 8-65
Carburetor adjustment ........................ 8-73
Idle speed adjustment ........................ 8-75
Valve clearance adjustment ............... 8-75
Throttle lever adjustment .................... 8-77
Front brake pad inspection ................. 8-79
Rear brake pad inspection.................. 8-81
Brake fluid level inspection ................. 8-83
Brake fluid replacement ...................... 8-87
Front brake lever free play.................. 8-89
Brake pedal height adjustment ........... 8-91
Parking brake adjustment ................... 8-93
Adjusting the rear brake light switch ... 8-97
Clutch lever free play adjustment ....... 8-99
Drive chain slack check .................... 8-101
Drive chain slack adjustment ............ 8-103
Lubricating the drive chain................ 8-107
Cable inspection and lubrication....... 8-111
8
U5TG61.book Page 2 Friday, April 2, 2004 11:28 AM

Brake pedal, brake lever and
clutch lever lubrication.................... 8-113
Front upper and lower arm pivot
lubrication ....................................... 8-117
Rear arm pivot lubrication ................ 8-119
Wheel removal ................................. 8-121
Wheel installation ............................. 8-123
Battery .............................................. 8-125
Battery maintenance ........................ 8-129
Fuse replacement............................. 8-131
Replacing a headlight bulb ............... 8-133
Headlight beam adjustment.............. 8-139
Tail/brake light bulb replacement ..... 8-141
Troubleshooting................................ 8-143
Troubleshooting chart....................... 8-147
CLEANING AND STORAGE ................... 9-1
A. Cleaning ........................................... 9-1
B. Storage ............................................ 9-7
SPECIFICATIONS ................................ 10-1
CONVERSION TABLE .......................... 11-1
91011U5TG61.book Page 3 Friday, April 2, 2004 11:28 AM

3-1
EBU00320
1-DESCRIPTION AND MACHINE
IDENTIFICATION1. Seat
2. Fuel tank cap
3. Radiator cap
4. Oil filter element
5. Brake pedal
6. Headlights
7. Fuel cock
8. Starter (choke)
9. Throttle stop screw
10. Fuse11. Tail/brake light
12. Coolant reservoir
13. Shift pedal
14. Engine oil tank
15. Clutch lever
16. Handlebar switches
17. Parking brake lever
18. Main switch
19. Throttle lever
20. Brake leverNOTE:_ The machine you have purchased may differ
slightly from those shown in the figures of this
manual. _
U5TG61.book Page 1 Friday, April 2, 2004 11:28 AM

5-1
EBU01130
1-PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Front brakeCheck operation, lever free play, fluid level and fluid leakage.
Fill with DOT 4 brake fluid if necessary.5-5–5-7, 8-79,
8-83–8-89
Rear brakeCheck operation, fluid level and fluid leakage.
Fill with DOT 4 brake fluid if necessary.5-5–5-7,
8-81–8-87, 8-91
ClutchCheck operation, condition and lever free play. 8-99
Parking brakeCheck operation, condition and cable length. 8-93–8-95
FuelCheck fuel level.
Fill with fuel if necessary.5-9–5-11
Engine oilCheck oil level.
Fill with oil if necessary.5-13, 8-23–8-39
Coolant reservoirCheck coolant level in reservoir.
Fill with coolant if necessary.5-15–5-17,
8-41–8-51
Drive chainCheck chain slack and condition.
Adjust if necessary.5-17, 8-101–8-109
ThrottleCheck for proper throttle cable operation and free play. 5-17, 8-77
Wheels and tiresCheck tire pressure, wear and damage.5-21–5-27,
8-121–8-123
Fittings and fastenersCheck all fittings and fasteners. 5-19
Lights and switchesCheck for proper operation.5-19, 8-97,
8-133–8-141
U5TG61.book Page 1 Friday, April 2, 2004 11:28 AM

5-19
EBU11620
Fittings and fasteners
Always check the tightness of chassis fittings and
fasteners before a ride. Take the machine to a
Yamaha dealer or refer to the Service Manual for
correct tightening torque.
EBU10030
Lights
Check the headlights and tail/brake light to make
sure they are in working condition. Repair as nec-
essary for proper operation.
EBU11700
Switches
Check the operation of all switches. Have a
Yamaha dealer repair as necessary for proper op-
eration.
U5TG61.book Page 19 Friday, April 2, 2004 11:28 AM

6-27
4. With the front and rear brakes applied, pull
the clutch lever, shift into 1st gear, and then
slowly release the clutch lever, brake lever
and brake pedal.NOTE:_ Make sure that the neutral indicator light goes off. _5. Turn the key to “OFF”.
U5TG61.book Page 27 Friday, April 2, 2004 11:28 AM

8-8 * Since these items require special tools, data and technical skills, have a Yamaha dealer perform the service.
Engine oil filter element
Replace.Drive chain
Check and adjust slack/alignment/clean/lube.Front brake*Check free play/operation/fluid leakage/
See NOTE Page 8-9.
Correct if necessary.Rear brake*Check operation/fluid leakage/See NOTE Page 8-9.
Correct if necessary.Clutch*Check operation.
Adjust if necessary.Wheels*Check balance/damage/runout.
Replace if necessary.Wheel bearings*Check bearing assemblies for looseness/damage.
Replace if damaged.Steering system*Check operation.
Repair if damaged.
Check toe-in.
Adjust if necessary.Front and rear
suspension*Check operation.
Correct if necessary.Upper and lower arm
pivot and steering shaft*Lubricate every 6 months with lithium-soap-based grease.Rear arm pivot*
Lubricate every 6 months with lithium-soap-based grease.Fittings and fasteners*Check all chassis fittings and fasteners.
Correct if necessary.Lights and switches*Check operation.
Adjust headlight beams.
ITEM ROUTINEWhichever
comes firstINITIAL EVERY
month136612
km
(mi)320
(200)1,200
(750)2,400
(1,500)2,400
(1,500)4,800
(3,000)
hours 20 75 150 150 300
U5TG61.book Page 8 Friday, April 2, 2004 11:28 AM

8-97 1. Rear brake light switch 2. Adjusting nut
1. Contacteur de feu stop sur frein arrière
2.Écrou de réglage
1. Interruptor de la luz de freno trasero
2. Tuerca de ajuste
EBU08330
Adjusting the rear brake light switch
The rear brake light switch, which is activated by
the brake pedal and brake lever, is properly adjust-
ed when the brake light comes on just before brak-
ing takes effect. If necessary, adjust the brake light
switch as follows.
Turn the adjusting nut while holding the rear brake
light switch in place. To make the brake light come
on earlier, turn the adjusting nut in direction
a. To
make the brake light come on later, turn the adjust-
ing nut in direction
b.
U5TG61.book Page 97 Friday, April 2, 2004 11:28 AM

8-141 1. Lens 2. Screw (× 2)
1. Lentille 2. Vis (× 2)
1. Lente 2. Tornillo (× 2)
1. Bulb
1. Ampoule
1. Bombilla
EBU12170
Tail/brake light bulb replacement
1. Remove the lens by removing the screws.
2. Remove the defective bulb by pushing it in-
ward and turning it counterclockwise.
3. Install a new bulb by pushing it inward and
turning it clockwise.
4. Install the lens by installing the screws.CAUTION:_ Do not overtighten the screws as the lens may
break. _
U5TG61.book Page 141 Friday, April 2, 2004 11:28 AM