lights YAMAHA YFZ450 2005 Owners Manual

EBU00150
1-CONTENTS
LOCATION OF THE WARNING
AND SPECIFICATION LABELS .............. 1-1
SAFETY INFORMATION ......................... 2-1
DESCRIPTION AND MACHINE
IDENTIFICATION .................................... 3-1
Identification number records ............... 3-3
Key identification number ..................... 3-5
Vehicle identification number ............... 3-5
Model label ........................................... 3-7
CONTROL FUNCTIONS ......................... 4-1
Main switch........................................... 4-1
Indicator and warning lights.................. 4-3
Handlebar switches .............................. 4-7
Throttle lever ...................................... 4-11
Speed limiter ...................................... 4-13
Clutch lever ........................................ 4-15
Brake lever ......................................... 4-17
Brake pedal ........................................ 4-17
Parking brake lever ............................ 4-19
Shift pedal .......................................... 4-21
Fuel tank cap ...................................... 4-21
1234
Fuel cock............................................ 4-23
Starter (choke) .................................. 4-25
Seat.................................................... 4-27
Front shock absorber adjustment ...... 4-29
Rear shock absorber adjustment ....... 4-39
PRE-OPERATION CHECKS ................... 5-1
Front and rear brakes .......................... 5-5
Fuel ...................................................... 5-9
Engine oil ........................................... 5-13
Coolant............................................... 5-15
Chain.................................................. 5-17
Throttle lever ...................................... 5-17
Fittings and fasteners......................... 5-19
Lights ................................................. 5-19
Switches............................................. 5-19
Tires ................................................... 5-21
How to measure tire pressure ............ 5-25
Tire wear limit..................................... 5-27
5
U5TG61.book Page 1 Friday, April 2, 2004 11:28 AM

2-17
WARNING
_

Always turn off the engine when refueling.


Do not refuel immediately after the engine
has been running and is still very hot.


Do not spill gasoline on the engine or ex-
haust pipe/muffler when refueling. Never
refuel while smoking or in the vicinity of
sparks, open flames, or other sources of
ignition such as the pilot lights of water
heaters and clothes dryers. Gasoline can
catch fire. You could be burned.


When transporting the machine in another
vehicle, be sure it is kept upright and that
the fuel cock is in the “OFF” position. Oth-
erwise, fuel may leak out of the carburetor
or fuel tank.


Gasoline is poisonous. If you should swal-
low some gasoline or inhale a lot of gaso-
line vapor, or get some gasoline in your
eyes, see your doctor immediately. If gaso-
line spills on your skin, wash with soap
and water. If gasoline spills on your cloth-
ing, change your clothes.
_
U5TG61.book Page 17 Friday, April 2, 2004 11:28 AM

3-1
EBU00320
1-DESCRIPTION AND MACHINE
IDENTIFICATION1. Seat
2. Fuel tank cap
3. Radiator cap
4. Oil filter element
5. Brake pedal
6. Headlights
7. Fuel cock
8. Starter (choke)
9. Throttle stop screw
10. Fuse11. Tail/brake light
12. Coolant reservoir
13. Shift pedal
14. Engine oil tank
15. Clutch lever
16. Handlebar switches
17. Parking brake lever
18. Main switch
19. Throttle lever
20. Brake leverNOTE:_ The machine you have purchased may differ
slightly from those shown in the figures of this
manual. _
U5TG61.book Page 1 Friday, April 2, 2004 11:28 AM

4-3 1. Neutral indicator light “N”
2. Coolant temperature warning light “”
1. Témoin de point mort “N”
2. Témoin d’avertissement de la température du liquide de
refroidissement “”
1. Luz de control de punto muerto “N”
2. Luz de aviso de la temperatura del refrigerante “”
EBU08020
Indicator and warning lights
EBU06030
Neutral indicator light “N”
This indicator light comes on when the transmis-
sion is in neutral.
EBU13850
Coolant temperature warning light “”
When the coolant temperature reaches a specified
level, this light comes on to warn that the coolant
temperature is too hot. If the light comes on during
operation, stop the engine as soon as it is safe to
do so and allow the engine to cool down for about
10 minutes.
The electrical circuit of the warning light can be
checked according to the following procedures.
1. Set the engine stop switch to “RUN” and turn
the key to “ON”.
2. Shift the transmission into the neutral position
or pull the clutch lever.
U5TG61.book Page 3 Friday, April 2, 2004 11:28 AM

4-7 1. Light switch “LIGHTS”
2. Engine stop switch “ENG. STOP”
3. Start switch “START”
1. Contacteur d’éclairage “LIGHTS”
2. Coupe-circuit du moteur “ENG. STOP”
3. Contacteur du démarreur “START”
1. Interruptor de luces “LIGHTS”
2. Interruptor de parada del motor “ENG. STOP”
3. Interruptor de arranque “START”
EBU00530
Handlebar switches
EBU13741
Light switch “LIGHTS”
Set the switch to the “LO” position to turn on the
low beam and the taillight.
Set the switch to the “HI” position to turn on the
high beam and the taillight.
Set the switch to the “OFF” position to turn off all
the lights.NOTE:_ The headlights and the taillight can be turned on
only when the engine is started. _
EBU06470
Start switch “START”
The starter motor cranks the engine when this
switch is pushed.CAUTION:_ See the starting instructions on page 6-3 prior
to starting the engine. _
U5TG61.book Page 7 Friday, April 2, 2004 11:28 AM

4-8
FBU00530
Contacteurs au guidon
FBU13741
Contacteur d’éclairage “LIGHTS”
Placer le contacteur à la position “LO” pour allumer les
feux de croisement et le feu arrière.
Placer le contacteur à la position “HI” pour allumer les
feux de route et le feu arrière.
Placer le contacteur sur “OFF” pour éteindre tous les
feux.N.B.:_ Les phares et le feu arrière ne s’allument que lorsque le
moteur tourne. _
FBU06470
Contacteur du démarreur “START”
Pour mettre le moteur en marche, enfoncer le contacteur
du démarreur.ATTENTION:_ Il convient de lire les instructions de démarrage à la
page 6-4 avant de mettre le moteur en marche. _
SBU00530
Interruptores del manillar
SBU13741
Interruptor de luces “LIGHTS”
Ponga el interruptor en la posición “LO” para encen-
der la luz de cruce y la luz de cola.
Ponga el interruptor en la posición “HI” para encen-
der la luz de carretera y la luz de cola.
Ponga el interruptor en la posición “OFF” para apa-
gar todas las luces.NOTA:_ Los faros y la luz de cola sólo pueden encenderse
cuando se ha puesto en marcha el motor. _
SBU06470
Interruptor de arranque “START”
Cuando se pulsa este interruptor el motor de arran-
que hace virar el motor de la máquina.AT E N C I O N :_ Antes de poner en marcha el motor, vea las ins-
trucciones sobre el arranque en la página 6-4. _
U5TG61.book Page 8 Friday, April 2, 2004 11:28 AM

4-9 1. Light switch “LIGHTS”
2. Engine stop switch “ENG. STOP”
3. Start switch “START”
1. Contacteur d’éclairage “LIGHTS”
2. Coupe-circuit du moteur “ENG. STOP”
3. Contacteur du démarreur “START”
1. Interruptor de luces “LIGHTS”
2. Interruptor de parada del motor “ENG. STOP”
3. Interruptor de arranque “START”
EBU11580
Engine stop switch “ENG. STOP”
Make sure that the engine stop switch is in the
“RUN” position before starting the engine. The en-
gine stop switch controls ignition and can be used
at all times to stop the engine, especially in an
emergency. The engine will not start or run when
the engine stop switch is turned to “OFF”.
U5TG61.book Page 9 Friday, April 2, 2004 11:28 AM

5-1
EBU01130
1-PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Front brakeCheck operation, lever free play, fluid level and fluid leakage.
Fill with DOT 4 brake fluid if necessary.5-5–5-7, 8-79,
8-83–8-89
Rear brakeCheck operation, fluid level and fluid leakage.
Fill with DOT 4 brake fluid if necessary.5-5–5-7,
8-81–8-87, 8-91
ClutchCheck operation, condition and lever free play. 8-99
Parking brakeCheck operation, condition and cable length. 8-93–8-95
FuelCheck fuel level.
Fill with fuel if necessary.5-9–5-11
Engine oilCheck oil level.
Fill with oil if necessary.5-13, 8-23–8-39
Coolant reservoirCheck coolant level in reservoir.
Fill with coolant if necessary.5-15–5-17,
8-41–8-51
Drive chainCheck chain slack and condition.
Adjust if necessary.5-17, 8-101–8-109
ThrottleCheck for proper throttle cable operation and free play. 5-17, 8-77
Wheels and tiresCheck tire pressure, wear and damage.5-21–5-27,
8-121–8-123
Fittings and fastenersCheck all fittings and fasteners. 5-19
Lights and switchesCheck for proper operation.5-19, 8-97,
8-133–8-141
U5TG61.book Page 1 Friday, April 2, 2004 11:28 AM

5-19
EBU11620
Fittings and fasteners
Always check the tightness of chassis fittings and
fasteners before a ride. Take the machine to a
Yamaha dealer or refer to the Service Manual for
correct tightening torque.
EBU10030
Lights
Check the headlights and tail/brake light to make
sure they are in working condition. Repair as nec-
essary for proper operation.
EBU11700
Switches
Check the operation of all switches. Have a
Yamaha dealer repair as necessary for proper op-
eration.
U5TG61.book Page 19 Friday, April 2, 2004 11:28 AM

8-8 * Since these items require special tools, data and technical skills, have a Yamaha dealer perform the service.
Engine oil filter element
Replace.Drive chain
Check and adjust slack/alignment/clean/lube.Front brake*Check free play/operation/fluid leakage/
See NOTE Page 8-9.
Correct if necessary.Rear brake*Check operation/fluid leakage/See NOTE Page 8-9.
Correct if necessary.Clutch*Check operation.
Adjust if necessary.Wheels*Check balance/damage/runout.
Replace if necessary.Wheel bearings*Check bearing assemblies for looseness/damage.
Replace if damaged.Steering system*Check operation.
Repair if damaged.
Check toe-in.
Adjust if necessary.Front and rear
suspension*Check operation.
Correct if necessary.Upper and lower arm
pivot and steering shaft*Lubricate every 6 months with lithium-soap-based grease.Rear arm pivot*
Lubricate every 6 months with lithium-soap-based grease.Fittings and fasteners*Check all chassis fittings and fasteners.
Correct if necessary.Lights and switches*Check operation.
Adjust headlight beams.
ITEM ROUTINEWhichever
comes firstINITIAL EVERY
month136612
km
(mi)320
(200)1,200
(750)2,400
(1,500)2,400
(1,500)4,800
(3,000)
hours 20 75 150 150 300
U5TG61.book Page 8 Friday, April 2, 2004 11:28 AM