engine oil YAMAHA YZF-R1S 2004 Owner's Guide

YAMAHA YZF-R1S 2004 Owner's Guide YZF-R1S 2004 YAMAHA YAMAHA https://www.carmanualsonline.info/img/51/57533/w960_57533-0.png YAMAHA YZF-R1S 2004 Owner's Guide

Page 228 of 457

YAMAHA YZF-R1S 2004 Owners Guide 5-6
Order Job / Part Q’ty Remarks
3
4
5
6
7
8
9
10Clutch cable
Ground lead
Stator coil assembly coupler
Crankshaft position sensor lead coupler
Oil level switch connector
Neutral switch connector
Sp

Page 240 of 457

YAMAHA YZF-R1S 2004 Owners Guide 5-18
CAMSHAFTENG
NOTE:
NOTE:
NOTE:
3. Install:
timing chain tensioner spring
timing chain tension rod 
1
Prior to installing the timing chain tensioner rod,
drain the engine oil from the timing chai

Page 242 of 457

YAMAHA YZF-R1S 2004 Owners Guide 5-20
CAMSHAFTENG
10 Nm (1.0 mkg, 7.2 ftlb)
NOTE:
CAUTION:
24 Nm (2.4 mkg, 17 ftlb)
CAUTION:
5. Install:
camshaft cap bolts
Tighten the camshaft cap bolts in stages and in
a crisscross pattern, wo

Page 246 of 457

YAMAHA YZF-R1S 2004 Owners Guide 5-24
CYLINDER HEADENG
8 Nm (0.8 mkg, 5.8 ftlb)
NOTE:
NOTE:
19 Nm (1.9 mkg, 14 ftlb)
67 Nm (6.7 mkg, 48 ftlb)
12 Nm (1.2 mkg, 8.7 ftlb)
NOTE:
EAS00233
INSTALLING THE CYLINDER HEAD
1. Check:
cy

Page 257 of 457

YAMAHA YZF-R1S 2004 Owners Guide 5-35
Order Job / Part Q’ty Remarks
1
2
3
4
5
6
7
8
9Removing the stator coil assembly
Rider seat
Fuel tank
Left side cowling
Bottom cowlings
Engine oil
Stator coil assembly lead coupler
Plug
Generat

Page 260 of 457

YAMAHA YZF-R1S 2004 Owners Guide 5-38
STARTER CLUTCH AND GENERATORENG
NOTE: REMOVING THE GENERATOR
1. Remove:
rider seat
fuel tank
Refer to “SEATS” and “FUEL TANK” in chapter
3.
2. Remove:
left side cowling
bottom cowling

Page 263 of 457

YAMAHA YZF-R1S 2004 Owners Guide 5-41
STARTER CLUTCH AND GENERATORENG
NOTE:
NOTE:
10 Nm (1.0 mkg, 7.2 ftlb)
INSTALLING THE STARTER CLUTCH
1. Install:
generator rotor 
1
damper 2
driven gear 3
The hole side of the damper is inst

Page 264 of 457

YAMAHA YZF-R1S 2004 Owners Guide 5-42
STARTER CLUTCH AND GENERATORENG
12 Nm (1.2 mkg, 8.7 ftlb)
22 Nm (2.2 mkg, 16 ftlb)
NOTE: 3. Install:
generator cover gasket
generator cover 
1
(M6 bolts)
(M8 bolts)
First tighten the M8 bo

Page 265 of 457

YAMAHA YZF-R1S 2004 Owners Guide 5-43
Order Job / Part Q’ty Remarks
1
2
3
4
5
6Removing the crankshaft position 
sensor
Rider seat
Fuel tank
Side cowlings
Bottom cowlings
Engine oil
Crankshaft position sensor lead coupler
Crankshaf

Page 266 of 457

YAMAHA YZF-R1S 2004 Owners Guide 5-44
CRANKSHAFT POSITION SENSORENG
NOTE:
12 Nm (1.2 mkg, 8.7 ftlb)
10 Nm (1.0 mkg, 7.2 ftlb)
REMOVING THE CRANKSHAFT POSITION 
SENSOR
1. Remove:
rider seat
fuel tank
Refer to “SEATS” and “