2-11
CHASSIS SPECIFICATIONSSPEC
CHASSIS SPECIFICATIONS
ItemStandardLimit
Frame
Frame type
Caster angle
Trail
Diamond
24
97 mm (3.82 in)
Front wheel
Wheel type
Rim
Size
Material
Wheel travel
Wheel runout
Max. radial wheel runout
Max. lateral wheel runout
Cast wheel
17 M / C MT3.50
Aluminum
120 mm (4.72 in)
1 mm (0.04 in)
0.5 mm (0.02 in)
Rear wheel
Wheel type
Rim
Size
Material
Wheel travel
Wheel runout
Max. radial wheel runout
Max. lateral wheel runout
Cast wheel
17 M / C MT6.00
Aluminum
130 mm (5.12 in)
1 mm (0.04 in)
0.5 mm (0.02 in)
Front tire
Tire type
Size
Model (manufacturer)
Tire pressure (cold)
0 90 kg (0 198 lb)
90 202 kg (198 445 lb)
High-speed riding
Min. tire tread depth
Tubeless
120 / 70 ZR17 M / C (58W)
Pilot POWER C (MICHELIN)
D218FL (DUNLOP)
250 kPa (2.5 kgf / cm
2, 2.5 bar, 35.6 psi)
250 kPa (2.5 kgf / cm2, 2.5 bar, 35.6 psi)
250 kPa (2.5 kgf / cm2, 2.5 bar, 35.6 psi)
1.6 mm (0.06 in)
Rear tire
Tire type
Size
Model (manufacturer)
Tire pressure (cold)
0 90 kg (0 198 lb)
90 202 kg (198 445 lb)
High-speed riding
Min. tire tread depth
Tubeless
190 / 50 ZR17 M / C (73W)
Pilot POWER G (MICHELIN)
D218L (DUNLOP)
290 kPa (2.9 kgf / cm
2, 2.9 bar, 41.3 psi)
290 kPa (2.9 kgf / cm2, 2.9 bar, 41.3 psi)
290 kPa (2.9 kgf / cm2, 2.9 bar, 41.3 psi)
1.6 mm (0.06 in)
ProCarManuals.com
3-60
CHECKING THE TIRES / CHECKING THE WHEELS
CHK
ADJ
WARNING
NOTE:
WARNING
NOTE: Front tire
Manufacturer
SizeModel
DUNLOP120 / 70ZR 17
M / C (58W)D218FL
MICHELIN120 / 70ZR 17
M / C (58W)Pilot
POWER C
Rear tire
Manufacturer
SizeModel
DUNLOP190 / 50ZR 17
M / C (73W)D218L
MICHELIN190 / 50ZR 17
M / C (73W)Pilot
POWER G
New tires have a relatively low grip on the
road surface until they have been slightly
worn. Therefore, approximately 100 km
should be traveled at normal speed before
any high-speed riding is done.
For tires with a direction of rotation mark
1:
Install the tire with the mark pointing in the
direction of wheel rotation.
Align the mark
2 with the valve installation
point.
EAS00168
CHECKING THE WHEELS
The following procedure applies to both of the
wheels.
1. Check:
wheel
Damage / out-of-round Replace.
Never attempt to make any repairs to the
wheel.
After a tire or wheel has been changed or re-
placed, always balance the wheel.
ProCarManuals.com
