remote control Acura CL 2003 Owner's Manual

This section gives inf ormation about
the controls and displays that
contribute to the daily operation of
your Acura. All the essential controls
are within easy reach............................
Control Locations .56
...............................
Indicator Lights .57
.............................................
Gauges .65
...............................
Speedometer .65
.................................
Tachometer .65
.....................................
Odometer .66
...................................
Trip Meter .66
Outside Temperature ...................................
Indicator .67
...................
Temperature Gauge . 67
..................................
Fuel Gauge .67
Maintenance Required ...................................
Indicator .68 Controls Near the Steering
.......................................
Wheel .69
...................................
Headlights .70
Automatic Lighting Off .....................................
Feature .71
............
Daytime Running Lights . 72
....
Instrument Panel Brightness . 72
................................
Turn Signals .72
.....................
Windshield Wipers .73
..................
Windshield Washers . 74
..........................
Hazard Warning .75
.............
Rear Window Def ogger . 75
......
Steering Wheel Adjustment . 76
...............................
Keys and Locks .78
..............................................
Keys .78
....................
Immobilizer System . 79
............................
Ignition Switch .80
......................
Power Door Locks .82
...................
Remote Transmitter . 83
...........................................
Trunk .87
........
Emergency Trunk Opener . 89
....................................
Glove Box .90
......
Rear Console Compartment . 90
............................
Seat Adjustments .91
.........
Driver’s Seat Adjustments . 91
...........
Driver’s Lumbar Support . 93Front Passenger’s Seat
............................
Adjustments .93
........................
Rear Seat Access .94
..........................
Head Restraints .95
............................................
Armrest .96
.............................................
Mirrors .98
....
Adjusting the Power Mirrors . 98
Driving Position Memory ........................................
System .100
..................................
Seat Heaters .103
............................
Power Windows .104
.......................................
Moonroof .107
...............................
Parking Brake .108
..................................
Digital Clock .109
........................
Sunglasses Holder .110
...........................
Beverage Holder .111
.................
Console Compartment . 113
........................................
Coin Box .113
.............................
Console Pocket .114
..................................
Storage Tray .115
......................................
Coat Hook .115
........................................
Sun Visor .116
................................
Vanity Mirror .116
............
Accessory Power Sockets . 117
...............................
Interior Lights .118
Instruments and Controls
Inst rument s and Cont rols55

Turn the ignition switch ON (II).
You cannot add a new driving
position in the memory unless the
ignition switch is ON (II). You can
recall a memorized position with
the ignition switch in any position.
Store a driving position as explained
in this section only when the car is
parked.
Your Acura has a memory f eature
f or the driver’s seat and outside
mirror positions.
Two seat and outside mirror
positions, f or dif f erent drivers or
drivingconditions,canbestoredin
separate memories. You select a
memorized position by pushing the
appropriate button or using the
appropriate remote transmitter
(Memory1orMemory2).
Adjust the seat to a comfortable
position (see page ).Press and release the MEMO
buttononthecontrolpanel.You
will hear a beep. Immediately
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator light in the
memory button will come on. The
current positions of the driver’s
seat and outside mirrors are now
stored.
Adjust the outside mirrors f or best
visibility (see page ).
3.
1.
2.
91
98
St oring a Driving Posit ion in Memory
Driving Posit ion Memory Syst em
Inst rument s and Cont rols100
M M E
EM
M O
O B
BUUT TT
TO
ON N

...............
Climate Control System . 122
.......
Fully-automatic Operation . 124
.......
Semi-automatic Operation . 125
.......
Fully-automatic Operation . 129
.......
Semi-automatic Operation . 130
Sunlight Sensor/ ............
Temperature Sensor . 134................................
Audio System .135
.................
Operating the Radio . 136
.................
Adjusting the Sound . 139
............
Audio System Lighting . 140
....................
Radio Frequencies . 140
........................
Radio Reception .140
Operating the Cassette .....................................
Player .142
............
Tape Search Functions . 143
Caring f or the Cassette .....................................
Player .146
.....
Operating the CD Changer . 147
..
Loading CDs in the Changer . 148
...................................
Operation .150
Removing CDs from the .................................
Changer .152
.......
Protecting Compact Discs . 154
CD Changer Error .............................
Indications .155
...........
Remote Audio Controls . 156
.......................
Thef t Protection .157
............................
Security System .158
...............................
Cruise Control .159
HomeLink Universal ................................
Transceiver .163
............................................
OnStar .168
3.2 CL without Navigation System
3.2 CL with Navigation System
Comf ort and Convenience Features
Comf ort and Convenience Feat ures121

ÛÝ
Two controls f or the audio system
are mounted in the steering wheel
hub. These let you control basic
f unctions without removing your
hand f rom the wheel. The top and bottom buttons adjust
thevolumeup( )ordown( ).
Press the proper button and hold it
until the desired volume is reached,
then release it.
The AUDIO/CH button has three
f unctions, depending on whether you
are listening to the radio, or playing a
cassette or CD.
If you are playing a cassette, use the
AUDIO/CH button to advance to the
next selection. You will see ‘‘FF’’
blinking in the display when you
press the AUDIO/CH button. The
system f ast f orwards until it senses a
silent period, then goes back to
PLAY.
If youareplayingaCD,thesystem
skips to the beginning of the next
track each time you push the
AUDIO/CH button. You will see the
disc and track number in the display.
If you are listening to the radio, use
the AUDIO/CH button to change
stations. Each time you press this
button, the system advances to the
next preset station on the band you
are listening to. You will see the
number of the selected Preset button
in the display. To change bands,
press the AM or FM button on the
audio system’s f ront panel.
Remote Audio Controls
Audio System
Comf ort and Convenience Feat ures156
A A
U
UD DI
IOO/ /C
CH H
B
BU UT TT
TO
ON N

The HomeLink Universal
Transceiver built into your car can
be programmed to operate remotely-
controlled devices around your home,
such as garage doors, lighting, or
home security systems. It can
replaceuptothreeremote
transmitters.
If you have problems with training
the HomeLink Universal Transceiver,
or would like inf ormation on home
products that can be operated by the
transmitter, call (800) 355-3515. On
the Internet, go to www.homelink.
com.Always ref er to the operating
instructions and saf ety inf ormation
that came with your garage door
opener or other equipment you
intend to operate with the HomeLink
Universal Transceiver. If you do not
have this inf ormation, you should
contact the manuf acturer of the
equipment.
While training or using HomeLink,
make sure you have a clear view of
the garage door or gate, and that no
one will be injured by its movement.
If you are training HomeLink to
operate a garage door or gate, it is
recommended that you unplug the
motor f or that device during training.
Repeatedly pressing the remote
control button could burn out the
motor.HomeLink stores the code in a
permanent memory. There should
be no need to retrain HomeLink if
your car’s battery goes dead or is
disconnected.
If your garage door opener was
manuf actured bef ore April 1982, you
may not be able to program
HomeLink to operate it. Garage door
openers manuf actured bef ore that
date do not have a safety feature that
causes them to stop and reverse if an
obstacle is detected during closing,
increasing the risk of injury. If you
have questions, call (800) 355-3515.
HomeL ink Universal T ransceiver
Comf ort and Convenience Feat ures
Customer Assistance
Important Saf ety Precautions
General Inf ormation
163

µ
If you are training the second or
third buttons, go directly to Step 1. Unplug the garage door opener
motor f rom the house current.
Bef ore you can use HomeLink to
operate devices around your home, it
must ‘‘learn’’ the proper codes. For
example, to train HomeLink to open
and close the garage door:
If you just took
delivery of your vehicle and have not
trained any of the buttons in
HomeLink bef ore, you should erase
any previously learned codes bef ore
training the f irst button. To do this,
press and hold the two outside
buttons on the HomeLink
transceiver for about 20 seconds,
until the red light f lashes. Release
the buttons, then proceed to Step 1.
Holdtheendof thegaragedoor
opener remote control 2 to 5
inches f rom HomeLink. Make
sure you are not blocking your
view of the red light in HomeLink. Select the HomeLink button you
want to train.
Press the button on the remote
control and the button on
HomeLink at the same time. Hold
down both buttons.
2. 3.
4.
1.
HomeL ink Universal T ransceiver
Comf ort and Convenience Feat ures
T raining HomeL inkBef ore you begin
164

CONT INUED
Canadian Owners:
The remote control you are training
from may stop transmitting after two
seconds. This is not long enough f or
HomeLink to learn the code. Release
and press the button on the remote
control every two seconds until
HomeLink has learned the code.For security purposes, newer garage
door opening systems use a ‘‘rolling’’
or variable code. Inf ormation f rom
the remote control and the garage
door opener are needed bef ore
HomeLink can operate the garage
door opener.
The ‘‘Training HomeLink’’
procedure trains HomeLink to the
proper garage door opener code.
The f ollowing procedure
synchronizes HomeLink to the
garage door opener so they send and
receive the correct codes.
The red light in HomeLink should
begin f lashing. It will f lash slowly
at first, then rapidly.
When the red light f lashes rapidly,
release both buttons. HomeLink
should have learned the code from
the remote control.
Plug in the garage door opener
motor, then test the HomeLink
transceiver button by pushing it. It
should operate the garage door.
If the button does not work, repeat
this procedure to train it again. If it
still does not work, you may have a variable or rolling code garage
door opener. Test this by pressing
and holding the HomeLink
transceiver button you just trained.
If the red light blinks f or two
seconds,thenstayson,youhavea
rolling code garage door opener.
You may be able to verify this with
the manufacturer’s documentation.
Go to ‘‘Training With a Rolling
Code System.’’
Repeat these steps to train the
other two HomeLink buttons to
operate any other remotely-
controlled devices around your
home (lighting, automatic gate,
security system, etc.).
5.
6.
8.
7. T raining With a Rolling Code
System
HomeL ink Universal T ransceiver
Comf ort and Convenience Feat ures165

As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thef ollowing two conditions: (1) This devicemay not cause harmf ul interf erence, and(2) this device must accept anyinterf erence received, includinginterf erence that may cause undesiredoperation.
Changes or modif ications not expresslyapproved by the party responsible f orcompliance could void the user’sauthority to operate the equipment.
This device complies with IndustryCanada Standard RSS-210.Operation is subject to the f ollowing twoconditions: (1) this device may not causeinterf erence, and (2) this device mustaccept any interf erence that may causeundesired operation of the device.
Toerasethecodesstoredinallthree
buttons, press and hold the two
outside buttons until the red light
begins to f lash, then release the
buttons.
Youshoulderaseallthreecodes
bef ore selling the car.
Totrainanalreadyprogrammed
HomeLink button to operate a new
device:
Select the HomeLink button you
want to train.
Press and hold the HomeLink
button until the red light begins to
f lash slowly (approximately 20
seconds).
While continuing to hold the
HomeLink button, place the
remotecontrolforthedevice2to
5inchesfromHomeLink. Release both buttons. HomeLink
should now be trained to operate
the device.
Press and hold the button on the
remote control. Hold both buttons
until the red light begins to f lash
rapidly.
1.
2.
3.
4. 5.
Retraining a Button
Erasing Codes
HomeL ink Universal T ransceiver
Comf ort and Convenience Feat ures167

Press this button to contact an
OnStar advisor. You will hear a
chime, f ollowed by the
announcement, ‘‘Connecting to
OnStar.’’ The connection should take
20 to 30 seconds. The advisor will
assist you with any of the services
included in your plan.
Depending on what service you
request, you may need to give your
Personal Identification Number
(PIN) to the advisor. Your PIN is a
number you make up and provide
when you establish your OnStar
service.
If cellular telephone service is not
available in the area you are driving
in, you will hear a f ast busy signal.
The system will retry the connection
several times bef ore returning to the
ready mode.
The OnStar buttons and indicator
are located in the base of the rear
view mirror.
The OnStar
system in your vehicle
gives you access to a wide range of
services and information with the
touch of a button. An OnStar advisor
is available 24 hours a day, 7 days a
week.
Roadside Assistance.
Emergency Services.
Automatic Notif ication of Airbag
Deployment.
Accident Assist.
Remote Door Locking/Unlocking.
Stolen Vehicle Tracking.
Misplaced Vehicle Assistance.
Online Concierge Services.
Route Support.
Ride Assist.
Inf ormation and Convenience
Services.
The Saf e & Sound Plan provides:
The Directions & Connections Plan
provides these additional f eatures:
Personal Concierge Services.
The Luxury & Leisure Plan adds: OnStar Services Button
OnStar Control Panel
OnSt ar
Comf ort and Convenience Feat ures168
O On nS
St taar r B
BU UT TT
TO
ON N S
SY
YSSTTE
EM
M
S
ST TA
A T
TU
US S L
LIIGGH HT
T
E
E M
M E
ER
RG GE EN
NC CYY
B
BU UT TT
TO
ON N
C
CA
A L
LL
L
A
A N
NS SWWE ER
R/ /E
E N
ND D
B
BU UT TT
TO
ON N

CONT INUED
...
Accessories and Modif ications . 185
................................
Accessories .185
.
Additional Safety Precautions . 186
............................
Modif ications .186
ACCESSORY (Ignition Key .......................................
Position) .81
............
Accessory Power Sockets . 117
....................
Additives, Engine Oil . 240
.........................
Airbag (SRS) .9, 46, 48
.....................
Air Cleaner Element .254
..............
Air Conditioning System . 122
..............................
Maintenance .264
.................................
Usage .124, 129
.......................
Air Pressure, Tires .266
...........................
Alarm, Anti-theft .158
.......................
Alcohol in Gasoline .330
.......
Aluminum Wheels, Cleaning . 287
......................................
Antif reeze .243
Anti-lock Brakes (ABS) ...............................
Indicator .61, 208
...................................
Operation .207
..............
Anti-thef t, Audio System . 157
Anti-thef t Steering Column ..............................................
Lock .81 ..........................
Anti-thef t System .158
..........................
Appearance Care .285
............................................
Armrest .96
...............
Audio Controls, Remote . 156
................................
Audio System .135
Automatic Climate Control ........................................
System .122
...
Automatic Lighting Off Feature . 71
Automatic Seat Belt ...................................
Tensioners .44
.............
Automatic Speed Control . 159
..............
Automatic Transmission . 197
..........................
Capacity, Fluid .326
...............
Checking Fluid Level . 250
....
Sequential SportShif t Mode . 200
.......................................
Shif ting .198
.
Shif t Lever Position Indicator . 197
................
Shif t Lever Positions . 198
....................
Shif t Lock Release . 204
Battery Charging System ...........................
Indicator .60, 309
............................
Jump Starting .303 ..............................
Maintenance .259
............................
Specif ications .327
..............................
Bef ore Driving .177
....................................
Belts,Seat .8,43
...........................
Beverage Holder .111
...................................
Body Repair .292
Brakes ...........
Anti-lock System (ABS) . 207
.............
Break-in, New Linings . 178
....................
Bulb Replacement .278
...........................................
Fluid .252
.......................................
Parking .108
.................
System Indicator . 60,312
........................
Wear Indicators .206
.............................
Braking System .206
........................
Break-in, New Car .178
..
Brightness Control, Instruments . 72
........................
Brights, Headlights .70
Index
A
B
I