Î
(#' )
22-221
Wipers/Washers
Component Location Index
WIPER/WASHER SWITCH
WINDSHIELD WIPER ARMS and LINKAGE
WIPER BLADES UNDER-HOOD FUSE/
RELAY BOX
WINDSHIELD
WIPER MOTOR
UNDER-DASH FUSE/
RELAY BOX
INTERMITTENT WIPER RELAY CIRCUIT
(Built into the MICU)
(cont’d)
Test, page 22-231
Replacement, page 22-234
Replacement, page 22-233
Adjustment, page 22-236
Replacement, ’06-07 models, page 22-235
’08-09 models, page 22-235
Test, page 22-231
Replacement,
page 22-233
Input Test, page 22-228
08/08/21 14:28:44 61SNR030_220_0223
ProCarManuals.com
DYNOMITE -2009-
(#' )
(#' )
’06-07 models ’08-09 models
22-23522-235
Wiper Blade Replacement
A
D
B C C
A B
A B
A
B
1. Lift the wiper arm off the windshield, raising thedriver’s side first, then the passenger’s side.
2. Remove the cover (A), by squeezing the two tabs and pulling it straight out.
3. Press and hold the tab (B), and slide the wiper blade (C) toward the tab until it releases from the
wiper arm (D).
4. Find the side of the blade labeled ‘‘LOCK’’ (A), then pull back the end of the blade and slide out the old
rubber (B).
5. Install a new rubber in the r everse order of removal.
6. Install the wiper blades onto the windshield wiper arms in the reverse order of removal.
7. Test by turning on the wipers. If the blades slip, turn off the wipers and seat the attachments more
firmly. 1. Lift the wiper arm off the windshield, raising the
driver’s side first, then the passenger’s side.
2. Pull up the tab (A), and slide the wiper blade (B) until it releases from the wiper arm (C).
3. Find the blade labeled ‘‘SET’’ (A), then release the blade from it.
4. Pull back the end of the blade and slide out the old rubber (B).
5. Install a new rubber in the r everse order of removal.
6. Install the wiper blades onto the windshield wiper arms in the reverse order of removal.
7. Test by turning on the wipers. If the blades slip, turn off the wipers and seat the attachments more
firmly.
08/08/21 14:28:50 61SNR030_220_0237
ProCarManuals.com
DYNOMITE -2009-
