display ACURA INTEGRA 2024 User Guide

94
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanation
Low Fuel Indicator
●Comes on when the fuel reserve is running
low (approximately 1. 8 U.S. gal/7.0 Liter
left).●Refuel your vehicle as soon as possible.
●Blinks if there is a problem with the fuel
gauge.●Have your vehicle checked by a dealer.
Anti-lock Brake
System ( ABS)
Indicator
●Comes on if there is a problem with the
ABS.●Stays on constantly - Have your vehicle checked
by a dealer. With this indicator on, your vehicle still
has normal braking abil ity but no anti-lock
function.
2 Anti-lock Brake System (ABS) P. 605
Supplemental
Restraint System
Indicator
●Comes on if a problem with any of the
following is detected:
-Supplemental Restraint System
- Side airbag system
- Side curtain airbag system
- Seat belt tensioner●Stays on constantly - Have your vehicle checked
by a dealer.
Electric Power
Steering (EPS)
System Indicator
• Comes on if there is a problem with the
EPS system.•Stays on constantly - Have your vehicle checked
by a dealer.
• Do not drive displays on the driver
information interface - Immediately stop in a
safe place and contact a dealer.
2 If the Electric Power Steering (EPS) System
Indicator Comes On P. 725
24 ACURA INTEGRA-313S56100.book 94 ページ ２０２３年２月１３日　月曜日　午後２時４１分

97
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanation
System Message
Indicator
•Comes on along with a beep when a
problem is detected. A system message on
the driver information interface appears at
the same time.●While the indicator is on, roll the right selector
wheel to see the message again.
2 Switching the Display P. 117●Refer to the Indicators in formation in this chapter
when a system message appears on the driver
information interface. Respond to the message
accordingly.
●The driver information inte rface will not return to
the normal screen unless th e warning is canceled,
or the right selector wheel is rolled.
NORMAL Mode
Indicator*●Comes on when you set the dynamic mode
to NORMAL .2Acura Integrated Dynamics System P. 454
COMFORT Mode
Indicator●Comes on when you set the dynamic mode
to COMFORT .2Acura Integrated Dynamics System P. 454
SPORT Mode
Indicator●Comes on when you set the dynamic mode
to SPORT .2Acura Integrated Dynamics System P. 454
SPORT+ Mode
Indicator*●Comes on when you set the dynamic mode
to SPORT+ .2Acura Integrated Dynamics System P. 454
INDIVIDUAL
Mode Indicator*●Comes on when you set the INDIVIDUAL
mode.2 Acura Integrated Dynamics System P. 454
* Not available on all models
24 ACURA INTEGRA-313S56100.book 97 ページ ２０２３年２月１３日　月曜日　午後２時４１分

104
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanation
Safety Support
Indicator (Amber)
●Comes on when the Road Departure
Mitigation system and/or CMBSTM shuts
itself off.
●Stays on - The temperature inside the camera is
too high.
Use the climate control sy stem to cool down the
camera.
The system activates when the temperature inside
the camera cools down.
2 Front Wide View Camera P. 590
●Stays on - The area around the camera is blocked
by dirt, mud, etc. Stop your vehicle in a safe place
and wipe the debris off with a soft cloth.
●Have your vehicle checked by a dealer if the
indicator and message are still displayed even after
you have cleaned the area around the camera.
2 Front Wide View Camera P. 590●It may come on when the ambient conditions are
dark, such as when driving in a tunnel, or at night,
dawn, or dusk.
24 ACURA INTEGRA-313S56100.book 104 ページ ２０２３年２月１３日　月曜日　午後２時４１分

107Continued
Instrument Panel
Gauges and Displays
Gauges
Gauges include the speedometer, fuel gauge, and other related indicators.
They are displayed when the power mode is in ON.
Displays your driving speed in mph or km/h.
■Speedometer1 Speedometer
You can change the speed/distance units.
2 Speed/Distance Units P. 131
2 Vehicle Settings
* P. 134
2 Customized Features P. 367
If you change the unit from miles and mph to km and
km/h, the current vehicle speed in mph appears next
to the digital speedometer.
Models with 7-in. Color Touchscreen
Models with 9-in. Color Touchscreen
U.S. models
Vehicle Speed in mph
* Not available on all models
24 ACURA INTEGRA-313S56100.book 107 ページ ２０２３年２月１３日　月曜日　午後２時４１分

uuGauges and Displays uGauges
108
Instrument Panel
Shows the number of engine revolutions per minute.
Displays the amount of fuel left in the fuel tank.
Displays the temperature of the engine coolant.
Shows the total number of miles or kilome ters that your vehicle has accumulated.
■Tachometer
■Fuel Gauge
■Temperature Gauge
■Odometer
1Fuel Gauge
NOTICE
You should refuel when the reading approaches .
Running out of fuel can cause the engine to misfire,
damaging the cata lytic converter.
The actual amount of remain ing fuel may differ from
the fuel gauge reading.E
1 Temperature Gauge
NOTICE
Driving with the temperat ure gauge reading in the
upper zone can cause serious engine damage. Pull
safely to the side of th e road and allow engine
temperature to return to normal.
2 Overheating P. 719
24 ACURA INTEGRA-313S56100.book 108 ページ ２０２３年２月１３日　月曜日　午後２時４１分

Continued109
uuGauges and Displays uGauges
Instrument Panel
Shows the outside temperature in Fahr enheit (U.S.) or Celsius (Canada).
■Adjusting the outside temperature display
Adjust the temperature reading by up to ±5°F or ±3°C if the temperature reading
seems incorrect.
Shows certain detected traffic signs while driving.
If speed limit warning is activated, the si gn icon blinks when the maximum speed of
the traffic sign detected is exceeded by a threshold, when compared with the vehicle
speed.
2 Traffic Sign Recognition System P. 583
■Outside Temperature
■Traffic Sign Recognition System
1Outside Temperature
The temperature sensor is in the front bumper.
Road heat and exhaust fr om another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
1 Adjusting the outside temperature display
You can adjust the temperature reading.
2 Vehicle Settings
* P. 134
2 Customized Features P. 367
Models with 7-in. Color Touchscreen
Models with 9-in. Color Touchscreen
1Traffic Sign Recognition System
The default speed limit wa rning threshold is the
maximum speed of the traffic sign detected.
You can adjust the threshol d for speed limit warning.
2 Vehicle Settings
* P. 134
2 Customized Features P. 367
Models with 7-in. Color Touchscreen
Models with 9-in. Color Touchscreen
* Not available on all models
24 ACURA INTEGRA-313S56100.book 109 ページ ２０２３年２月１３日　月曜日　午後２時４１分

uuGauges and Displays uGauges
110
Instrument Panel
Shows the current mode for ACC with Low Speed Follow*, LKAS, and Traffic Jam
Assist*.
2 Adaptive Cruise Control (ACC) with Low Speed Follow* P. 512
2 Adaptive Cruise Control (ACC)* P. 533
2 Lane Keeping Assist System (LKAS) P. 553
2 Traffic Jam Assist
* P. 565
■Current Mode for ACC with Low Speed Follow*, the LKAS,
and Traffic Jam Assist*
1 Current Mode for ACC with Low Speed Follow*, the LKAS, and
Traffic Jam Assist*
When you set speed for A CC with Low Speed Follow*
or cruise control, a set sp eed mark will be displayed
on the speedometer.
Set
Speed
* Not available on all models
24 ACURA INTEGRA-313S56100.book 110 ページ ２０２３年２月１３日　月曜日　午後２時４１分

111
uuGauges and Displays uDriver Information Interface (Left Side Area)
Continued
Instrument Panel
Driver Information Inte rface (Left Side Area)
Shows the current mode for audio and phone information, etc.
2Audio Remote Controls P. 238
2 Bluetooth ® HandsFreeLink ® P. 385, 405
Shows the clock.
■Clock1 Clock
You can adjust the time manually and change the
clock display to show the 12 hour clock or 24 hour
clock. 2 Clock P. 150
You can choose whether the clock is displayed on the
driver information interface. 2 Customize Display P. 114
24 ACURA INTEGRA-313S56100.book 111 ページ ２０２３年２月１３日　月曜日　午後２時４１分

uuGauges and Displays uDriver Information Interface (Left Side Area)
112
Instrument Panel
Measures the lap time, and displays the previously measured times and the fastest
lap time.
■Measuring LAP Time
1. Change the display content on the left side
area to Stopwatch .
2Select the display content on the left
side area P. 116
2.Press the left selector wheel to display the
stopwatch menu screen.
3. Select Start/Stop and press the left
selector wheel to display the lap time
measurement screen.
4. Press the left selector wheel to start
measurement.
5. Press the left selector wheel to stop
measurement.
u To measure the time per lap, roll the left
selector wheel at the end of each lap.
u To return to the stopwatch menu screen,
press and hold the left selector wheel.
■Stopwatch*1Stopwatch*
Be sure to use this measurement function only where
and when it is safe to do so.
Lap time is displayed from 00:00.00 to 99:59.99.
A maximum of 20 lap times ca n be stored at a time.
* Not available on all models
24 ACURA INTEGRA-313S56100.book 112 ページ ２０２３年２月１３日　月曜日　午後２時４１分

113
uuGauges and Displays uDriver Information Interface (Left Side Area)
Continued
Instrument Panel
■Checking/Clearing history
To check or clear the history, select History/
Reset on the stopwatch menu screen and
press the left selector wheel. u To scroll through the lap times, roll the
left selector wheel.
u To clear the history, press the left selector
wheel on the stopwatch history screen
while the lap time is not being measured,
then select and press Reset.
u To return to the stopwatch menu screen,
press and hold the left selector wheel.
24 ACURA INTEGRA-313S56100.book 113 ページ ２０２３年２月１３日　月曜日　午後２時４１分