display Acura TL 2009 Owner's Guide

This monitor shows how much
torque is being delivered to each
wheel. For more inf ormation, see
page .You can receive or make phone calls
f rom your cell phone through your
vehicle’s Bluetooth
HandsFreeLink(HFL) system
without touching your cell phone. YoucanseeHFLinformationonthe
navigation screen (see page ).
To use the system, your cell phone
and the HFL system must be linked.
Not all cell phones are compatible
with this system. Ref er to page
for instructions on how to link
your cell phone to HFL and how to
receive or make phone calls, or visit
the acura.com/handsf reelink
website.
517 422
392
On models without navigation system
On models with navigation system
SH-AWD models only
BluetoothHandsFreeL inkSH-AWD T orque Distribution
Monitor
Multi-Inf ormation Display
86
U.S. model is shown.
U.S. model is shown.
\f—\f—y

y
) \f\fy\f\f
y
2009 TL

ÛÝÛÝ
ÛÝ
If there is a problem with your
vehicle, f or example, the engine oil
level is low or a door is not f ully
closed, the multi-inf ormation display
will show you the problem. It does
this by interrupting the current
display with one or more messages. The system message(s) triggers the
appropriate indicator(s) on the
instrument panel, including the
system message indicator, to come
on. The system message indicator
does not go of f until the problem(s)
is corrected.
You will also hear a beep when the
system message comes on f or the
first time.
Most of the messages are displayed
f or about 5 seconds, and then the
normal display returns. If there are
several system messages to be
shown, the display switches these
messages every 5 seconds.
To switch the message(s) bef ore 5
seconds have elapsed, press the
INFO( / )buttononthesteering
wheel.
Even if you press the INFO ( / )
button, some messages stay on or
come on again at regular intervals
until the problem is corrected.
If the system message indicator
remains lit on the instrument panel,
you can see the corresponding
message(s) again by pressing the
INFO ( / ) button repeatedly.
Here is a list of all messages:
CONT INUED
System Messages
Multi-Inf ormation Display
Inst rument s and Cont rols
87
SYSTEM MESSAGE INDICATOR
\f—\f—y
y
) \f\fy\f\fy
2009 TL

See page33
See page
11
See page 20
See page 20
See page 33 See page
201
See page 555
See page 597 See page
595
See page 596
See page 595
See page 521
See page 523
See page 76
Multi-Inf ormation Display
88
U.S.
Canada U.S.
Canada
Canada
U.S.
Canada
U.S.
\f—\f—y
y
) \f\fy\f\fy
2009 TL

CONT INUED
See page527
See page 528
See page 528
See page 529
See page 529 See page
73 See page
518
See page 518
See page 536
See page 537
See page 538
See page
136
See page 488 See page
70
See page 507
Seepage504
Seepage506On models without
keyless accesssystem
On models withkeyless accesssystem
Multi-Inf ormation Display
Inst rument s and Cont rols
89
U.S.
Canada
SH-AWD model only
SH-AWD model only
U.S. model shown
U.S. model shown
—
—y
y
) yy
2009 TL

See page145 See page
188
See page 188
See page 185
See page 186
See page 190 See page
191
See page 181
See page 183
See page 182
See page 181
See page 183
See page
552
Multi-Inf ormation Display
On models wit h keyless access
syst em
90
On models without
keyless access systemCanadian models only
\f—
—y
y
) \f\fy\f\fy
2009 TL

ÎÎ
Î
CONT INUED
If you try to enter the customizing
mode while the vehicle is moving,
you will see a ‘‘MUST STOP AND
SHIFTTOPARKTOCHANGE
SETTINGS’’ message and you
cannot change the settings.
You can customize some vehicle
control settings f or ‘‘DRIVER 1’’ and
‘‘DRIVER 2’’ separately.
To have the driver’s ID detected,
make sure the driver’s door is
unlocked with a corresponding
remote transmitter/keyless access
remote.
You can customize some vehicle
control settings. To change the
settings, the ignition switch must be
in the ON (II) position, and the
vehicle must be stopped with the
transmission in Park.
If you turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position, or move the shif t lever out
of Park, the display will change to
the normal screen.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. VEHICLE
OFF (LOCK) Mode is the
equivalent of LOCK (0),
ACCESSORY Mode is the
equivalent of ACCESSORY (I),
and ON Mode is the equivalent
of ON (II). For more
information, see pages and. If you use the key to unlock the
driver’s door, the system cannot
recognize either ‘‘DRIVER 1’’ or
‘‘DRIVER 2.’’
:
180 178On models without keyless access
system
Multi-Inf ormation Display
K eyless Memory Settings
Inst rument s and Cont rols
91
TM
\f—
—y
y
) \f\fy\f\fy
2009 TL

ÛÝRef er to the table on the f ollowing
pages about the settings you want to
customize.
If you want to change any vehicle
control settings, select Keyless
Memory Settings by pressing
either INFO button ( / ), then
press the SEL/RESET button. Select
CHG SETTING, then press the
SEL/RESET button.
Multi-Inf ormation Display
92
DRIVER’S ID
Press the SEL/RESET
button.
TM
\f—
—y
\fy
) \f\fy\f\fy
2009 TL

ÎÎ
ÎÎÎ
Î
Î
Î
Î
µ™¶ ™
µ™¶ ™
Î
Î
CONT INUED
Group Setup Menu Item Page
Description Setting Option
LOW
MIN
OFF
MET ER SET UP
(P.98)
POSITION SETUP
(P.107) LANGUAGE SELECT ION
ADJUST OUTSIDE
TEMP. DISPLAY
TRIP COMPUTER TRIP A
INFO RESET
ADJUST ALARM VOLUME
AUTO INTERIOR
ILLUMINATION
KEYLESS START GUIDANCE
SCREENS
MEMORY POSIT ION LINK
99
100
101
103
104
105
108
Changes the language used in the display.
Changes the outside temperature reading above or
below its current reading.
Causes trip meter A and the average fuel economy
to reset when you refuel.
Changes the indicator alarm volumes into three
levels.
Changes the interior light sensitivity to your liking.
Changes the display of the keyless start guidance
screens.
Changes the driver’s seat and the outside mirror
positions to a stored setting. ENGLISH
FRENCH
SPANISH
5°F 0°F 5°F
(U.S.) 3°C 0°C 3°C
(Canada)
WITH REFUEL
MANUAL ONLY
IGN OFF
HIGH
MID
LOW
MAX
HIGH
MID
ON
OFF
ON
OFF
1:
2: Default setting
Only on models with Keyless Access system
2 1
111
1
1
1
1
Multi-Inf ormation Display
Inst rument s and Cont rols
93
——y
y
) yy
2009 TL

ÎÎ
Î
Î
Î
Î
Î
Î
Î
Description
Group Setup Setting Option
Menu Item Page
Changes which doors unlock when you use the
remote or grab the driver’s door handle.
Causes some exterior lights to blink when you
unlock/lock the doors by grabbing or touching the
sensor/pushing the button on the driver’s door
handle.
Causes the beeper to sound when you unlock/lock
the doors by grabbing or touching the sensor/
pushing the button on the driver’s door handle.
Changes how long (in seconds) the interior lights
stay on after you close the doors.
Changes how long (in seconds) the exterior lights
stay on after you close the driver’s door.
Changes the timing of when the headlights come
on. The headlight switch needs to be in the AUTO
position.15 sec
0sec
LOW
MIN
KEYLESS ACCESS
SETUP
(P.110)
LIGHTING SETUP
(P.115)
DRIVER DOOR
ALL DOORS
ON
OFF
ON
OFF
60 sec
30 sec
60 sec
30 sec
15 sec
MAX
HIGH
MID
DOOR UNLOCK MODE
KEYLESS ACCESS LIGHT
FLASH
KEYLESS ACCESS BEEP
INTERIOR LIGHT
DIMMING T IME
HEADLIGHT
AUTO OFF TIMER
AUTO LIGHT
SENSITIVITY
111
112
113
116
117
118
1:
2: Default setting
Only on models with keyless access system2 1
1
1
1
1
1
Multi-Inf ormation Display
94
—
—y

y
) yy
2009 TL

ÎÎ
Î
Î
Î
Î
Description
Menu Item Setting Option Page
Group Setup
Changes when the doors automatically lock.
Changes when the doors automatically unlock.
Changes which doors unlock with the remote
transmitter/keyless access remote on the first
push.
The exterior lights flash each time you press the
LOCK or UNLOCK button. A beeper will also
sound when you press the LOCK button twice.
Changes how long it takes (in seconds) for the
doors to relock and the security system to set after
you unlock but do not open the door.
Set/Cancel all the customized settings as default.
AUTO DOOR LOCK
AUTO DOOR UNLOCK
KEY AND REMOTE
UNLOCK MODE
KEYLESS LOCK
ACKNOWLEDGMENT
SECURITY RELOCK
TIMER
SHIFT FROM P
WIT H VEHICLE SPEED
OFF
SHIFT TO P/DRIVER DOOR
SHIFT TO P/ALL DOORS
IGN OFF/DRIVER DOOR
IGN OFF/ALL DOORS
OFF
DRIVER DOOR
ALL DOORS
ON
OFF
90 sec
60 sec
30 sec
SET
CANCEL121
123
125
126
127
129
DOOR/WINDOW
SETUP
(P.120)
DEFAULT ALL
(P.129)
: Default setting
Multi-Inf ormation Display
Inst rument s and Cont rols
95
—
—y

y
) y
y
2009 TL