Acura TSX 2009 Owner's Manual

ÛÝWhen your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘AUTO
LIGHT SENSITIVITY’’ and repeat
the procedure again.
Press the SEL/RESET button to see
the selections.
Select the desired setting (MAX,
HIGH, MID, LOW or MIN) by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
Multi-Inf ormation Display
98
\f—\f—\fy\f\fy
)!
\f\fy\f
\fy
2009 TSX

Û
Ý
ÛÝ
ÛÝ
CONT INUED
AUTO DOOR LOCK
Here are the five custom settings for
the door setup:
DOOR LOCK MODE
KEYLESS LOCK
ACKNOWLEDGMENT
SECURITY RELOCK TIMER
AUTO DOOR UNLOCK
While ‘‘DOOR SETUP’’ is shown,
press the SEL/RESET button to
enter the customize mode.
Each time you press the INFO ( / ) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
Multi-Inf ormation Display
Door Setup
Inst rument s and Cont rols
99
: Press the INFO button ( / ).
: Press the SEL/
RESET button.
\f—\f—\fy\f\fy
)!
\f\fy\f
\fy
2009 TSX

µÛÝ
µ µ
ÛÝ
Auto Door Lock
(Automatic transmission model only)
There are three settings you can
choose f rom:
SHIFT FROM P
The doors lock whenever you move
the shift lever out of Park.
Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
OFF
The auto door lock is deactivated all
the time.
WITH VEH SPD
The doors lock when the vehicle
speed reaches about 10 mph (about
15 km/h).
You can choose this item to
customize f rom ‘‘DOOR SETUP’’ by
pressing the INFO ( / ) button
repeatedly.Press the SEL/RESET button to
enter the selecting mode.
Multi-Inf ormation Display
100
A/T model is shown.
\f—\f—\fy\f
\fy
)!
\f\fy\f
\fy
2009 TSX

ÛÝ
CONT INUED
When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘AUTO
DOOR LOCK’’ and repeat the
procedure again.
To select whether the driver’s door
unlocks or all the doors unlock when
you unlock the doors with the
remote transmitter or the key, follow
these instructions.
You can choose this item to
customize f rom ‘‘DOOR SETUP’’ by
pressing the INFO ( / ) button
repeatedly.
Door Lock Mode
Multi-Inf ormation Display
Inst rument s and Cont rols
101
\f—\f—\fy\f

y
)!
\f\fy\f
\fy
2009 TSX

ÛÝ
Press the SEL/RESET button to
enter the selecting mode.
Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button. When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘KEY
AND REMOTE UNLOCK MODE’’
and repeat the procedure again.
Multi-Inf ormation Display
102
\f—\f—\fy\f

y
)!
\f\fy\f
\fy
2009 TSX

ÛÝ
ÛÝ
Keyless Lock Acknowledgment
Select ON or OFF by pressing the
INFO ( / ) button, then enter
your selection by pressing the SEL/
RESET button.
When you push the LOCK button on
the remote transmitter, some
exterior lights f lash, and a beeper
sounds when you push the LOCK
button again within 5 seconds to
verify that the doors and the trunk
arelockedandthesecuritysystem
has set (see page ). You can
customize the exterior lights not to
f lash and the beeper not to sound.
You can choose this item to
customize f rom ‘‘DOOR SETUP’’ by
pressing the INFO ( / ) button
repeatedly.Press the SEL/RESET button to
enter the selecting mode.
293
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols
103
\f—\f—\fy\f
y
)!
\f\fy\f
\fy
2009 TSX

ÛÝ
Security Relock Timer
When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘KEYLESS LOCK
ACKNOWLEDGMENT’’ and repeat
the procedure again.If you unlock the doors with the
remote transmitter, but do not open
any of the doors within 30 seconds,
the doors automatically relock and
the security system sets.
You can change this relock time
f rom 30 seconds to 60 or 90 seconds.
You can choose this item to
customize f rom ‘‘DOOR SETUP’’ by
pressing the INFO ( / ) button
repeatedly.
Multi-Inf ormation Display
104
\f—\f—\fy\f
y
)!
\f\fy\f
\fy
2009 TSX

ÛÝWhen your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
Press the SEL/RESET button to
enter the selecting mode. If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘SECURITY RELOCK TIMER’’ and
repeat the procedure again.
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols
105
\f—\f—\fy\f
y
)!
\f\fy\f

\fy
2009 TSX

µµ µ
µ
µ ÛÝ
Auto Door Unlock
Automatic transmission model onlyAutomatic transmission model only
There are f ive possible settings f or
automatic transmission models and
three possible settings f or manual
transmission models.
DRIVER DOOR WITH SHIFT TO PThe driver’s door unlocks when
you move the shif t lever to Park.
ALL DOORS WITH SHIFT TO P
All the doors unlock when you move
the shift lever to Park. DRIVER DOOR WITH IGN OFF
The driver’s door unlocks when you
turn the ignition switch to the LOCK
(0) position.
ALL DOORS WITH IGN OFF All
the doors unlock when you turn the
ignition switch to the LOCK (0)
position.
OFF The auto door unlock is
deactivated all the time. This is the
factory default setting.
You can choose this item to
customize f rom ‘‘DOOR SETUP’’ by
pressing the INFO ( / ) button
repeatedly.
Multi-Inf ormation Display
106
\f—\f—\fy\f

y
)!
\f\fy\f


y
2009 TSX

ÛÝ ÛÝWhen your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘AUTO
DOOR UNLOCK’’ and repeat the
procedure again.
Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
Press the SEL/RESET button to
enter the selecting mode.
If you choose ‘‘DRIVER DOOR with
SHIFT to P,’’ you will see the above
display. If you choose ‘‘ALL DOORS WITH
IGN OFF,’’ you will see the above
display.
Press the INFO ( / ) button to
switch the door lock mode setting.
Then, press the SEL/RESET button
to enter your selection.
Multi-Inf ormation Display
Inst rument s and Cont rols
107
A/T model is shown.
A/T model is shown.
\f—\f—\fy\f\fy
)!
\f\fy\f

y
2009 TSX